×

We'll help you find the right contractor.

Share your project details and we'll reach out to All Things Good so you don't have to.

We'll also connect you with other vetted professionals who are a strong match for your project. That way, you can compare quotes, meet different contractors, and make the choice that feels right for you.

Get Started
A

Location and Projects

Address
6112 Sutter Ave, Richmond, CA, 94804
Use our bidding system to request a quote

All Things Good HVAC/Mechanical Contractor

We are a home performance and energy efficiency company that offers comprehensive home remodeling and HVAC upgrade services to customers in the Alameda and Contra Costa county areas. We do business a little differently—and our customers agree!

From BuildZoom: All Things Good, 6112 Sutter Ave, Richmond, CA (Owned by: Martin Alexander Ka Minneboo A, Martin Alexander Ka Minneboo) holds a General Building, Warm Air Heating, Ventilating And Air Conditioning license and 2 other licenses according to the California license board.

Their BuildZoom score of 118 ranks in the top 1% of 336,931 California licensed contractors.

Their license was verified as active when we last checked. If you are thinking of hiring All Things Good, we recommend double-checking their license status with the license board and using our project planner to get competitive quotes.

All Things Good Contact Information

Phone: (510) 778-7001
Address: 6112 Sutter Ave, Richmond, CA 94804

All Things Good Richmond

Quality

118
99th percentile
Pro tip: We generally recommend hiring a contractor with a score higher than 95.
All Things Good has a BuildZoom score of 118, which places them above 99% of 336,931 contractors in California.

Activity

15 projects
2025
19 projects
2024
23 projects
2023
Our building permit records indicate that All Things Good has worked on at least 57.0 projects over the past 3 years.

This is an overview of this contractor's activity. Click here to access our complete licensing and building permit database.

Experience

10 projects
Home Additions
37 projects
HVAC projects
11 projects
Mechanical projects
Analyzing permits over the last 4 years shows that All Things Good mostly works on hvac project and mechanical project projects.

Pricing

8 projects
< $5k
22 projects
$5k-$20k
15 projects
$20k-$50k
Value Not Public: 26.0 projects
The typical size of their permits is approximately $16,219. This graph shows the distribution of these job values.
Pro tip: For more details about their pricing, check out their recent activity to see how much they have charged for different types of work.

Building Permits by All Things Good

Sort by: Notable Notable | Date Date | Job Value Job Value
He 2.5 ton indoor unit m: svz-kp30na will replace the gas furnace in the crawlspace.the 2. ton outdoor unit m:suz-ka30na will be installed on the ride of the building.the ducts in the crawlspace will be replaced with r8 flexible ducts.a 240v 30 amp circuit will be installed to power the new heat pump system
Valuation:
N/A
Permit #:
B2025-00748
Status:
final
Fee:
$664
Permit Type:
N/A
Building Type:
N/A
Building permit
2024-12-09
1. remove the old air conditioning unit and replace it with an outdoor heat pump m:suz-ka30na. 2. addition 240v 30 amp circuit to power the new system. 3. demolish old furnace from garage and relocate new air handler in the attic space. m: svz-kp30na 4. demolish old ducts from crawl space area. - install new r8 flexible duct in attic space
Valuation:
$25,983
Permit #:
BLD2025-03737
Status:
issued
Fee:
$447
Permit Type:
Other
Building Type:
N/A
The gas furnace will be replaced with the air handler m; svz-kp30na the outdoor unit m; suz-ka30na will be located on the ride side of the building a 30amp 240v electrical circuit will be installed to power the heat pump system
Valuation:
N/A
Permit #:
B2025-02888
Status:
issued
Fee:
$898
Permit Type:
N/A
Building Type:
N/A
The existing furnace will be removed from the crawlspace area and replaced by an indoor unit. the exterior unit will be installed on the left side of the building. a new 240v 20-amp circuit will be installed to power the new system. the existing 120v 19-amp circuit will be repurposed for a new service outlet. the existing ducts will be replaced with new r8 flexible ducts
Valuation:
$22,488
Permit #:
B2024-05015
Status:
issued
Fee:
$1,262
Permit Type:
N/A
Building Type:
N/A
Plumbing permit
2024-08-07
- installing 65 gallon hpwh the plan is to relocate the new hpwh to other side of the wall in the garage storage closet area; - adding a new 220v 30 amp electrical circuit will be install to power the new hpwh (incidental) - attic insulation blown in cellulose 1200 sq ft r-44 in attic
Valuation:
$16,219
Permit #:
P24-0002
Status:
final
Fee:
$413
Permit Type:
N/A
Building Type:
N/A
Building - pre application
2024-05-21
- installing 65 gallon hpwh the plan is to relocate the new hpwh to other side of the wall in the garage storage closet area; - adding a new 220v 30 amp electrical circuit will be install to power the new hpwh (incidental) - attic insulation blown in cellulose 1200 sq ft r-44 in attic
Valuation:
$16,219
Permit #:
PREBLD24-0255
Status:
approved
Fee:
$69
Permit Type:
N/A
Building Type:
N/A
Replace gas furnace with a new heat pump system. install 240v 30-amp circuit. existing ducts will be replaced with r8 flexible ducts as accessible
Valuation:
$20,000
Permit #:
B2025-00435
Status:
approved
Fee:
$471
Permit Type:
N/A
Building Type:
N/A
Replace air conditioning addition new heat pump in backyard addition 220v circuit for hp r44 attic insulation (2558 sq ft) blown in cellulose. r19 floor insulation (1250 sq ft). r8 flexible ducts will replace accessible ducts in the crawlspace
Valuation:
$23,958
Permit #:
B2024-02720
Status:
issued
Fee:
$543
Permit Type:
N/A
Building Type:
N/A
Remove gas furnace & 3.5 ton ducted heat pump system on the exterior. indoor unit installed in the crawl space & a new 240 v 40 amp circuit
Valuation:
N/A
Permit #:
B2025-02126
Status:
approved
Fee:
$727
Permit Type:
N/A
Building Type:
N/A
Replacing furnace with heat pump. one dedicated 30amp 240v electrical circuit will power the new heat pump system
Valuation:
$17,000
Permit #:
B2025-01476
Status:
issued
Fee:
$681
Permit Type:
N/A
Building Type:
N/A
2.5 ducted heat pump the air handler unit will be install in the attic space. new r-8 ducts will be install in the attic. the outdoor unit will be install on the second floor deck area in the back of the building
Valuation:
$16,082
Permit #:
B2024-03730
Status:
issued
Fee:
N/A
Permit Type:
N/A
Building Type:
N/A
System 1 : heat pump addition on air handler replacement duct more than 40 ft 220v 20 amp for hvac heat pump 110v 15 amp to power service light and outlets tank to tankless water heater 180k btu insulation eco-batt insulation attic + wall + floor r-13 for walls - r19 for floors - no attic
Valuation:
$27,424
Permit #:
B2023-04144
Status:
issued
Fee:
$1,878
Permit Type:
N/A
Building Type:
N/A
Remove gas furnace install indoor air handler in the attic with an outdoor ducted heat pump & 240 v 30 amp circuit. install 110 volt 15 amp circuit to serve two (2) service lights & two (2) service receptacles
Valuation:
N/A
Permit #:
B2024-05442
Status:
issued
Fee:
$726
Permit Type:
N/A
Building Type:
N/A
Remove existing heating & install heat pump. outdoor unit in the rear & indoor unit in the crawl space with r8 flexible ducting. new 240v 30 amp circuit
Valuation:
$18,415
Permit #:
B2025-02288
Status:
issued
Fee:
$436
Permit Type:
N/A
Building Type:
N/A
Express mechanical permit - residential
2023-04-27
System 1: 2.5 ton ducted heat pump system for the main floor system 2 : 1 ton ductless system for the upper floor. attic insulation upgrade floor insulation upgrade
Valuation:
$27,532
Permit #:
MW23-0139
Status:
final
Fee:
$673
Permit Type:
N/A
Building Type:
N/A
Install a 240v 30 amp circuit 2100 sqft of r-44 & r-19 insulation in attic & floor replace existing gas furnace with indoor air handler installing outdoor heat pump condenser
Valuation:
$1,000
Permit #:
B2024-03688
Status:
approved
Fee:
$386
Permit Type:
N/A
Building Type:
N/A
Building - residential mechanical
2023-11-16
Installing 18 k btu ducted heat pump and replace ducting with new r-8 flexible ducts. the indoor unit will be installed in the crawlspace. the outdoor unit will be installed in the back of the building **hers report may be required at final inspection**
Valuation:
$13,819
Permit #:
BIM23-013355
Status:
final
Fee:
$421
Permit Type:
N/A
Building Type:
N/A
Install new heat pump water heater model: prouh50 t2 ru375-30 in basement area • install a dedicated 220v 30-amp electrical circuit to power the water heater
Valuation:
$7,632
Permit #:
B2024-00404
Status:
final
Fee:
$254
Permit Type:
N/A
Building Type:
N/A
Building - residential mechanical
2023-05-30
System 1 -completely new heat pump and air handler w duct replace system 2 - completely new heat pump and air handler w duct replace **hers report may be required at final inspection**
Valuation:
$30,620
Permit #:
BIM23-006556
Status:
final
Fee:
$791
Permit Type:
N/A
Building Type:
N/A
Installing heat pump mechanicals to the left side of the house; removal of gas furnace and replacement with ducted indoor unit in the basement
Valuation:
$16,918
Permit #:
B2024-04032
Status:
approved
Fee:
$524
Permit Type:
N/A
Building Type:
N/A

All Things Good Reviews

BuildZoom hasn't received any reviews for All Things Good. Click here to be alerted when reviews are posted about them.
Please write a review about All Things Good
1 Rate this contractor
Click stars to rate
2 Provide a detailed review of this contractor.