Share your project details and we'll reach out to
Clarke & Rush Mechanical, Inc
so you don't have to.
We'll also connect you with other vetted professionals who are a strong match for your project. That way, you can compare quotes, meet different contractors, and make the choice that feels right for you.
Their BuildZoom score of 114 ranks in the top 2% of 336,931 California licensed contractors.
Their license was verified as active when we last checked. If you are thinking of hiring Clarke & Rush Mechanical, Inc, we recommend double-checking their license status with the license board and using our bidding system to get competitive quotes.
Epc - remove and replace existing split heat pumps on a like for like basis. the existing units shall be removed. the new units shall be placed in the same location as the existing unit and shall not exceed the size of the existing units by more than 25%. cf-1r-alt-hvac on file: carbon monoxide & smoke alarms required. reference crc sections r315 & r314
Hvac permit: remove and replace existing gas/electric split system like for like. the existing unit shall be removed. the new unit shall be placed in the same location as the existing unit and shall not exceed the size of the existing unit by more than 25%. cf-1r-alt-hvac on file: carbon monoxide & smoke alarms required. reference crc sections r315 & r314
Valuation:
$45,730
Permit #:
COM-2507466
Status:
issued
Fee:
$861
Permit Type:
N/A
Building Type:
N/A
Miscellaneous electrical plumbing mechanical solar/pv electric vehicle charger generator (not for re
C/o existing 3 ton split system 16 seer 96% afue in closet relcate to the attic; remove and replace some ducting c/o existing 3 ton split system 16 seer 96% afue in closet relcate to the attic; remove and replace some ducting c/o existing 50 gallon gas water heater in closet to tankless water heater in attic c/o existing 50 gallon gas water heater in closet to tankless water heater in... see more
Changeout to existing hvac system only. no additional electrical mechanical plumbing or structural work permitted.; c/o existing 2.5 ton split system 15 seer 80% afue furnace is in the attic c/o exisitng ducting and replace with r-8 ducting all accessible c/o existing 3.5 ton split system 15 seer 80% afue furnace is in the attic c/o exisitng ducting and replace with r-8 ducting all ac... see more
No duct work permitted. change-out split system to split system (all-electric heat pump). the existing unit shall be removed. the new unit shall be placed in the same location as the existing unit and shall not exceed the size of the existing unit by more than 25%
Change-out w/new ducts split system to split system (all-electric heat pump). the existing unit shall be removed. the new unit shall be placed in the same location as the existing unit and shall not exceed the size of the existing unit by more than 25%
New install/new location roof mount (all-electric heat pump). a unit will be installed in a new location. this unit will be fully screened behind a solid fence or alternatively behind shrubs or buildings providing screening resulting in the unit not being visible from any street views. roof top installations will be located on back roof slopes and below ridge lines and not visible fro... see more
No duct work permitted. change-out split system to split system (all-electric heat pump). the existing unit shall be removed. the new unit shall be placed in the same location as the existing unit and shall not exceed the size of the existing unit by more than 25%
Hvac permit: cut in=2 ton split system. 19.8 seer 9 hspf. air handler is in the attic. ducting=r-8 hvac cut in. the new unit shall be screened from street views by the building with no portion of the new unit being visible from any street views. cf-1r-alt-hvac on file: carbon monoxide & smoke alarms required. reference crc sections r315 & r314
No duct work permitted. change-out roof mount to roof mount (all-electric heat pump). the existing unit shall be removed. the new unit shall be placed in the same location as the existing unit and shall not exceed the size of the existing unit by more than 25%
No duct work permitted. change-out split system to split system (all-electric heat pump). the existing unit shall be removed. the new unit shall be placed in the same location as the existing unit and shall not exceed the size of the existing unit by more than 25%
No duct work permitted. change-out roof mount to roof mount (all-electric heat pump). the existing unit shall be removed. the new unit shall be placed in the same location as the existing unit and shall not exceed the size of the existing unit by more than 25%
No duct work permitted. change-out split system to split system (all-electric heat pump). the existing unit shall be removed. the new unit shall be placed in the same location as the existing unit and shall not exceed the size of the existing unit by more than 25%
Changeout to existing hvac system only. no additional electrical mechanical plumbing or structural work permitted.; convert from gas to electric; c/o existing 4 ton split system 23 seer 12 hspf air hanlder is in the attic c/o existing ductless mini split system 18 seer 8.5 hspf
No duct work permitted. change-out roof mount to roof mount (all-electric heat pump). the existing unit shall be removed. the new unit shall be placed in the same location as the existing unit and shall not exceed the size of the existing unit by more than 25%
New install/new location roof mount. a unit will be installed in a new location. this unit will be fully screened behind a solid fence or alternatively behind shrubs or buildings providing screening resulting in the unit not being visible from any street views. roof top installations will be located on back roof slopes and below ridge lines and not visible from street views
Hvac permit: remove old wall heater. cut in-hvac system=2 ton package 14.5 seer package unit is on the roof top and ducting with r-8 duction. the new unit shall be screened from street views by the building with no portion of the new unit being visible from any street views. cf-1r-alt-hvac on file: carbon monoxide & smoke alarms required. reference crc sections r315 & r314
No duct work permitted. change-out split system to split system (all-electric heat pump). the existing unit shall be removed. the new unit shall be placed in the same location as the existing unit and shall not exceed the size of the existing unit by more than 25%
Change-out w/new ducts split system to split system (all-electric heat pump). the existing unit shall be removed. the new unit shall be placed in the same location as the existing unit and shall not exceed the size of the existing unit by more than 25%
New install/new location split system. a unit will be installed in a new location. this unit will be fully screened behind a solid fence or alternatively behind shrubs or buildings providing screening resulting in the unit not being visible from any street views. roof top installations will be located on back roof slopes and below ridge lines and not visible from street views
Valuation:
$29,460
Permit #:
RES-2503587
Status:
final
Fee:
$281
Permit Type:
N/A
Building Type:
Single family
Clarke & Rush Mechanical, Inc Reviews
BuildZoom hasn't received any reviews for Clarke & Rush Mechanical, Inc. Click here to be alerted when reviews are posted about them.
Please write a review about Clarke & Rush Mechanical, Inc
Boiler, Hot Water Heating And Steam Fitting, Warm Air Heating, Ventilating And Air Conditioning, Sheet Metal, Glazing, Plumbing, Insulation And Acoustical, Electrical, General Building
BuildZoom verified this license was active as of June 2026.
Verify this license's status for Clarke & Rush Mechanical, Inc at the California Contractors State License Board.
This is a sample of licensing data; click here to access a complete history.
Inactive License
License #
754136
Status
Inactive
State
California
Type
Glazing
According to the California Contractors State License Board, the status of this license was at one point cancelled. However, this information may have changed.
Check this license's status for Clarke & Rush Mechanical, Inc at the California Contractors State License Board.
This is a sample of licensing data; click here to access a complete history.
Inactive License
License #
951040
Status
Inactive
State
California
Type
Solar
According to the California Contractors State License Board, the status of this license was at one point cancelled. However, this information may have changed.
Check this license's status for Clarke & Rush Mechanical, Inc at the California Contractors State License Board.
This is a sample of licensing data; click here to access a complete history.