Updated: Mar 22, 2026
Location and Projects
Address
20478 Jewett Lake Rd, Fergus Falls, MN, 56537
Use our bidding system to
request a quote
Cossette Electric
Cossette Electric, 20478 Jewett Lake Rd, Fergus Falls, MN (Owned by: Cossette, Joshua D) holds a Electrical license and 3 other licenses according to the Minnesota license board.
Their BuildZoom score of 106 ranks in the top 7% of 77,973 Minnesota licensed contractors.
Their license was verified as active when we last checked. If you are thinking of hiring Cossette Electric, we recommend double-checking their license status with the license board and using our project planner to get competitive quotes.
Cossette Electric Services
Start a project today:
Cossette Electric Contact Information
Phone Number: (218) 770-7919
Address: 20478 Jewett Lake Rd, Fergus Falls, MN 56537
This is a sample of this contractor's permits. Click here to access their complete permit history.
Wire new anytime fitness. used existing feeder but will install new 200amp 480volt fused disconnect new 480 to 208v transformer new 400amp 208v panel and 1 480volt sub panel. installed lighting and receptacles and hooked up all new equipment
Valuation:
N/A
Permit #:
ELE2505-06312
Status:
issued
Fee:
$216
Permit Type:
Non-dwelling
Building Type:
N/A
Install 200amp service by transformer- ran feeder to the north to storage container and installed 2 receptacles at that service- ran another feeder from main service to the south to rv ped- then ran another feeder to panel on outside of cabin- installed a few circuits in cabin- trenched power to river
Valuation:
N/A
Permit #:
ELE2506-04501
Status:
final
Fee:
$184
Permit Type:
Non-dwelling
Building Type:
N/A
Install 2 new 200amp services and feed 3 greenhouses. each greenhouse is fed from a 200amp terminal box and has 100amp panels in them. each greenhouse has 4 circuits for panel receptacles. refeed existing pole barn off the other 200amp terminal box
Valuation:
N/A
Permit #:
ELE2509-06392
Status:
final
Fee:
$405
Permit Type:
Non-dwelling
Building Type:
N/A
Wire new heat pump. used existing circuit that fed old air conditioning unit. installed new disconnect/whip. installed 50amp breaker. wire sized is 10awg. minimum circuit ampacity is 30
Valuation:
N/A
Permit #:
ELE2502-01559
Status:
final
Fee:
$36
Permit Type:
One-family dwelling
Building Type:
N/A
Trim out house. jennen electric started project (roughed it in and started trimming out) we came in and installed the rest of the devices panels are located in utility room located under stairs in garage
Valuation:
N/A
Permit #:
ELE2510-07616
Status:
final
Fee:
$466
Permit Type:
One-family dwelling
Building Type:
N/A
Install new 200amp service on utility pole. ran feeder over to bathhouse across street. homeowner wired bathhouse years ago and had subpanel in it. they already covered walls so we refeed that panel and installed dual function breakers for those circuits
Valuation:
N/A
Permit #:
ELE2410-12404
Status:
final
Fee:
$77
Permit Type:
One-family dwelling
Building Type:
N/A
Fergus falls regional treatment center. new work completed outside on the north end of the complex for concerts in the park -install 2 new 200amp services 1 service has 5-50amp circuits and 5-20amp circuits for panel receptacles 1 service has 2-50amp circuits and 4-20amp circuits for panel receptacles
Valuation:
N/A
Permit #:
ELE2406-08304
Status:
final
Fee:
$167
Permit Type:
Non-dwelling
Building Type:
N/A
Wire from house to detached garage went bad under apron for driveway. we trenched a new line from the house to the garage to replace it. we also changed out the panel in the garage because the old one was not up to code and we added one new circuit for a welder receptacle
Valuation:
N/A
Permit #:
ELE2405-05554
Status:
final
Fee:
$58
Permit Type:
One-family dwelling
Building Type:
N/A
The hospital installed a new air handler. while installing the new air handler they had to open up a chase from the basement to the roof. we had to demolish some electrical on those walls so they could get into the chases. now that the new air handler is up and running they want to close the chases back up. so we reinstalled receptacles/nurse call/etc on those walls. (one small wall o... see more
Valuation:
N/A
Permit #:
ELE2405-00490
Status:
final
Fee:
$71
Permit Type:
Non-dwelling
Building Type:
N/A
Install new 200amp service in house and detached garage to replace old fuse boxes. 1-200amp outdoor panel 1- 200amp indoor panel and 1-90amp 100 amp panel for garage. refeed all existing circuits
Valuation:
N/A
Permit #:
ELE2411-08979
Status:
final
Fee:
$165
Permit Type:
One-family dwelling
Building Type:
N/A
Install 200amp emergency disconnect panel on new modular building. run feeder to modular building panel. rehook existing well. install 2 outdoor 50amp receptacles on modular building. refeed a few existing circuits from old trailer house panel
Valuation:
N/A
Permit #:
ELE2407-04317
Status:
final
Fee:
$171
Permit Type:
One-family dwelling
Building Type:
N/A
Added 4 new receptacles on north wall of main floor. 2-30amp receptacles and 2-20amp receptacles receptacles are for bands that play at the eagles
Valuation:
N/A
Permit #:
ELE2501-07810
Status:
final
Fee:
$36
Permit Type:
Non-dwelling
Building Type:
N/A
City moved press inside building. installed new conduit and wire. 3 phase 20amp. also added 50amp welder receptacle on north wall of shop
Valuation:
N/A
Permit #:
ELE2505-07368
Status:
final
Fee:
$36
Permit Type:
Non-dwelling
Building Type:
N/A
Ran 2 new circuits. one circuit for alignment rack and one new circuit for tire changer. added 4 plex on south wall between service bays. (used existing circuit) new circuits in sub panel a. circuits 13 and 15 and circuits 8 and 10
Valuation:
N/A
Permit #:
ELE2403-05354
Status:
final
Fee:
$36
Permit Type:
Non-dwelling
Building Type:
N/A
Utility company buried primary and installed new meter pedestal and removed old utility pole. we installed new 200amp service and 200amp terminal box to refeed existing circuits at old pole location in the middle of the yard
Valuation:
N/A
Permit #:
ELE2408-03355
Status:
final
Fee:
$36
Permit Type:
One-family dwelling
Building Type:
N/A
Remodel bathroom. 3 new circuits- also installed new subpanel to feed new circuits 1-new circuit for bathroom recept 1-new circuit for bathroom lights/attic lights 1-new circuit to refeed kitchen lights due to demolish work
Valuation:
N/A
Permit #:
ELE2403-06243
Status:
final
Fee:
$106
Permit Type:
One-family dwelling
Building Type:
N/A
Retrofit office area to led's-ballast bypass (10 troffers and 5 cans) retrofit parts room/storage room-ballast bypass (19 fixtures) retrofit 2 lights located in bathroom move 4 lights in shop and addition 4 new ufo fixtures
Valuation:
N/A
Permit #:
ELE2402-01340
Status:
final
Fee:
$36
Permit Type:
Non-dwelling
Building Type:
N/A
Boys bathroom remodel. new conduit to bathroom/shower areas. 2 new circuits. 1 circuit for lights and 1 circuit for receptacles
Valuation:
N/A
Permit #:
ELE2505-05336
Status:
final
Fee:
$36
Permit Type:
Non-dwelling
Building Type:
N/A
Wire new shop vac located in garage. 240v gfci breaker-240v receptacle in garage 20amp wire new 5kva unit heater in garage
Valuation:
N/A
Permit #:
ELE2505-07170
Status:
final
Fee:
$36
Permit Type:
One-family dwelling
Building Type:
N/A
Remodel kitchen. 2 new circuits- 1 for fridge and 1 for microwave reroute switching out of wall that is being removed
Valuation:
N/A
Permit #:
ELE2504-01154
Status:
final
Fee:
$71
Permit Type:
One-family dwelling
Building Type:
N/A
Cossette Electric Reviews
BuildZoom hasn't received any reviews for Cossette Electric. Click here to be alerted when reviews are posted about them.
Recent Buildzoom Projects
Verified License
BuildZoom confirmed this contractor's license
Cossette Electric License info
Verified License
| License # | EA737578 |
| Status | Active |
| State | Minnesota |
| Type | Electrical |
- BuildZoom verified this license was active as of January 2026.
Verify this license's status for Cossette Electric at the Minnesota Department of Labor & Industry.
This is a sample of licensing data; click here to access a complete history.
Verified License
| License # | AM008567 |
| Status | Active |
| State | Minnesota |
| Type | Electrical |
- BuildZoom verified this license was active as of March 2026.
Verify this license's status for Cossette Electric at the Minnesota Department of Labor & Industry.
This is a sample of licensing data; click here to access a complete history.
Inactive License
| License # | AM008567 |
| Status | Inactive |
| State | Minnesota |
| Type | Master A Electrician |
- According to the Minnesota Department of Labor & Industry, the status of this license was at one point cancelled. However, this information may have changed.
Check this license's status for Cossette Electric at the Minnesota Department of Labor & Industry.
This is a sample of licensing data; click here to access a complete history.
Inactive License
| License # | AJ017652 |
| Status | Inactive |
| State | Minnesota |
- According to the Minnesota Department of Labor & Industry, the status of this license was at one point cancelled. However, this information may have changed.
Check this license's status for Cossette Electric at the Minnesota Department of Labor & Industry.
This is a sample of licensing data; click here to access a complete history.
106
BuildZoom Score
440
Permits
- Building permit records show that Cossette Electric has worked on 440 permitted projects.
Cossette Electric Employees
CD
Cossette, Joshua D
Owner