Updated: Nov 13, 2025
Location and Projects
Address
424 W Louise St, Grand Island, NE, 68801
Use our bidding system to
request a quote
Daniel J Boord Electrician
Daniel J Boord at 424 W Louise St, Grand Island, NE 68801, has a BuildZoom score of 105 and ranks in the top 8% of 22,706 Nebraska contractors.
If you’re thinking about hiring them, we recommend double-checking their license status with your local licensing authority. Alternatively, use our bidding system to be easily matched to qualified, licensed professionals in your area.
Daniel J Boord Contact Information
Address: 424 W Louise St, Grand Island, NE 68801
Edit
Do you work for this business? Unlock this free profile to update company info and see who's viewing your profile.
This is a sample of this contractor's permits. Click here to access their complete permit history.
Installing a new 24kw generac generator and service rated auto transfer switch. installing a cable assembly in conduit spec for use 3/c #1 aluminum with 8/c control wires. underground from transfer switch in pvc to the generator. extending the egc via crimp on c-tap to extend to new bond. removing bonding screw from panel and separating neutrals and grounds. installing additional grou... see more
Valuation:
N/A
Permit #:
ELC-25-03508
Status:
issued
Fee:
$76
Permit Type:
N/A
Building Type:
N/A
Customer wanted a higher mast for clearance on the patio existing was under 9’ installed new 1 1/2” rigid mast and clamp style poa new 2/0 aluminum from weather head to panel. updated the grounding continuous to water meter. installed 2 new ground rods as i couldn’t find the exisiting to extend.meter mounted over existing recessed meter can old mast removed completely and sealed
Valuation:
N/A
Permit #:
ELC-25-03224
Status:
issued
Fee:
$27
Permit Type:
N/A
Building Type:
N/A
Installing new 200 amp ats at service entrance and feeding existing 200 amp panel in basement. separating grounds and neutrals in the existing panel. installing new 1 1/4” conduit from generator to ats with 3 #2 thhn and 1 #6 ground installing concrete pad updating grounding at meter via adding ground rod updating egc to proper size to ats
Valuation:
N/A
Permit #:
ELC-25-01935
Status:
issued
Fee:
$76
Permit Type:
N/A
Building Type:
N/A
Customer provided generac 26kw generator with 2 - 200 amp service rated auto transfer switches install jbox to intercept conduits heading to the house and barn install conduit from ats to jbox install new 320 amp ringless meter to replace the meter main that is existing install conduit to generator from ats
Valuation:
N/A
Permit #:
ELC-25-01118
Status:
complete
Fee:
$146
Permit Type:
N/A
Building Type:
N/A
Installed new exterior lights and wp outlets installed disconnect for heater previously wired installed switches and timers from wiring previously installed troubleshooting of wiring not right or messed up during addition installed new ufer from foundation of addition
Valuation:
N/A
Permit #:
ELC-25-00381
Status:
complete
Fee:
$27
Permit Type:
N/A
Building Type:
N/A
Install new electrical for new bedroom in the lower level install extension of the smoke detector circuit to new bedroom install fan box and 13 boxes for devices install new home run from panel for new bedroom
Valuation:
N/A
Permit #:
ELC-25-00068
Status:
complete
Fee:
$27
Permit Type:
N/A
Building Type:
N/A
Rerouting oppd conduit 2 1/2 pvc underground to a new meter main 200 amp. installing #4 ground to water service entry 2 new ground rods and itbb. installing conduit through house to panel location. demolition of existing electrical panels and consolidating to one main lug only 200 amp panel. installing new breakers on existing circuits due to brand change
Valuation:
N/A
Permit #:
ELC-25-05761
Status:
issued
Fee:
$27
Permit Type:
N/A
Building Type:
N/A
Installed hot tub disconnect with gfci breaker conduit and wiring to tub. installed jbox where existing electrical was ran for the outdoor kitchen and pulled cable to the panel. installed 50 amp breaker in panel for the 40 amp hot tub. sealed all entries
Valuation:
N/A
Permit #:
ELC-25-05755
Status:
complete
Fee:
$27
Permit Type:
N/A
Building Type:
N/A
Install new 3 phase overhead service to new meter and to ats for generator update panel in closet to allow clearances update grounding outside at meter install conduit from generator to the ats install new conduit from ats to updated panel install conduit from panel room to detached building for power and remove single phase service install 40kw 3 phase generator for shop power emerge... see more
Valuation:
N/A
Permit #:
ELC-25-05668
Status:
issued
Fee:
$76
Permit Type:
N/A
Building Type:
N/A
Install new 200 amp meter new mast with new weatherhead. install new conduit to the new leviton panel in the basement approx 9 1/2’ inside. extend water ground to panel. install new breakers and label all circuits install new conduit and wiring for ev charger on garage wall with new breaker in panel
Valuation:
N/A
Permit #:
ELC-25-04730
Status:
issued
Fee:
$49
Permit Type:
N/A
Building Type:
N/A
Trench to post from house with 3/4” pvc 18” deep. #6 from main panel to mlo nema 3r siemens disconnect from disconnect type b car flex 3/4” to tub control panel. install 50 amp gfci in panel for tub. install 50 amp in main panel standard 2 pole breaker
Valuation:
N/A
Permit #:
ELC-25-04127
Status:
complete
Fee:
$27
Permit Type:
N/A
Building Type:
N/A
Installed new meter over existing recessed style and used existing conduit to panel. installed new riser through the eaves weather head and conductors with new poa. updated grounding outside with new ground rods and #6 between them spaced at 6’ apart installed new 150 amp main panel in basement condensed from multiple fuse boxes extended egc to within 5’ and jumpered meter panel sche... see more
Valuation:
N/A
Permit #:
ELC-25-03937
Status:
complete
Fee:
$27
Permit Type:
N/A
Building Type:
N/A
Installing a generator 22kw with 200 amp ats. installing new overhead from new meter and new wiring from transfer switch to new mlo panel inside. upgrading grounding at meter upgrading grounding to water meter. installing wiring and conduit from transfer switch to the generator and low voltage controls
Valuation:
N/A
Permit #:
ELC-24-07292
Status:
issued
Fee:
$54
Permit Type:
N/A
Building Type:
N/A
Install rough electrical in newly framed areas. rework lighting and switching for egress. provide new circuits as needed per office expecting to repurpose and reuse existing circuits
Valuation:
N/A
Permit #:
ELC-25-02874
Status:
complete
Fee:
$32
Permit Type:
N/A
Building Type:
N/A
Customer has a hot tub original install has no gfci breaker or a working disconnect install new gfci disconnect for exisiting spa. repair conduit at tub entry concealing the wires
Valuation:
N/A
Permit #:
ELC-25-01117
Status:
complete
Fee:
$27
Permit Type:
N/A
Building Type:
N/A
Install genlink manual transfer switch with surge protection behind the meter. meter has lightning protection bonded to can split bolt attached neutral from genlink device
Valuation:
N/A
Permit #:
ELC-25-02404
Status:
issued
Fee:
$27
Permit Type:
N/A
Building Type:
N/A
Installed exhaust fan in bathroom installed with existing switched power to light. 1/2” flex and #12’s installed exhaust fan in dish area installed with existing switched power to light. 1/2” flex and #12’s installed flex to move outlet in bar that was preventing cooler from sitting flush installed functioning gfci in dish area installed panel schedule to identify circuits that are ex... see more
Valuation:
N/A
Permit #:
ELC-24-07692
Status:
complete
Fee:
$27
Permit Type:
N/A
Building Type:
N/A
Existing 200 amp fpe breaker panel located in bathroom. pipe from meter to new panel in garage which is adjacent to the bathroom where the existing panel is. install 3/4” conduit thru the concrete wall to the new panel less than 6’ away install new 200 amp panel 17 circuits and update or extend the egc and addition ground rod at meter
Valuation:
N/A
Permit #:
ELC-24-05839
Status:
issued
Fee:
$58
Permit Type:
N/A
Building Type:
N/A
Storm damage bent mast on a through the eave service mast. service drop didn't meet 10 clearance above the deck bent or straight. meter recessed and at 7. new meter mast weatherhead conduit and conductors to existing main panel. installed 2 ground rods. installed house mount poa
Valuation:
N/A
Permit #:
ELC-24-04870
Status:
issued
Fee:
$49
Permit Type:
N/A
Building Type:
N/A
Installing new electrical in the new garage. installing a total of 4 outlets inside 2 lights inside and 2 lights and a wp outlet outside. trenching to garage from meter main. replacing existing meter with meter main shortening the existing mast to not be obstructed by the house. installing a new ground rod and moving the egc to the new meter main. installing new conductors
Valuation:
N/A
Permit #:
ELC-24-01993
Status:
complete
Fee:
$53
Permit Type:
N/A
Building Type:
N/A
Similar Contractors See more
License # EC 13697
Omaha, NE
100
BZ Score
-
Avg Project
-
Projects
License # 43414-26
Hastings, NE
102
BZ Score
-
Avg Project
-
Projects
License # 69937-26
Kearney, NE
97
BZ Score
$7
Avg Project
-
Projects
Daniel J Boord Reviews
BuildZoom hasn't received any reviews for Daniel J Boord. Click here to be alerted when reviews are posted about them.
Recent Buildzoom Projects
Hiring a contractor?
Daniel J Boord License info
License Not Required
| Status | Not Required |
- BuildZoom verified in April, 2020 that this contractor does not need a license to be a electrician in Nebraska.
This is a sample of licensing data; click here to access a complete history.
105
BuildZoom Score
102
Permits
- Building permit records show that Daniel J Boord has worked on 102 permitted projects.