Updated: Jun 01, 2026
Location and Projects
Address
48 WILLIAMS WAY, Tolland, CT, 06084
Use our bidding system to
request a quote
Edward C West Jr Electrician
Edward C West Jr, 48 Williams Way, Tolland, CT (Employee: Edward West) holds a Electrical Unlimited Contractor license according to the Connecticut license board.
Their BuildZoom score of 108 ranks in the top 5% of 12,093 Connecticut licensed contractors.
Their license was verified as active when we last checked. If you are thinking of hiring Edward C West Jr, we recommend double-checking their license status with the license board and using our project planner to get competitive quotes.
Edward C West Jr Contact Information
Address: 48 WILLIAMS WAY, Tolland, CT 06084
Edit
Do you work for this business? Unlock this free profile to update company info and see who's viewing your profile.
Edward C West Jr Tolland
Quality
108
95th percentile
Pro tip:
We generally recommend hiring a contractor with a score higher than 95.
Edward C West Jr has a BuildZoom score of 108, which places them above 95% of 12,093 contractors in Connecticut.
Activity
|
18 projects
|
2025 |
|
20 projects
|
2024 |
|
25 projects
|
2023 |
Our building permit records indicate that Edward C West Jr has worked on at least
63.0 projects over the past 3 years.
This is an overview of this contractor's activity. Click here to access our complete licensing and building permit database.
This is an overview of this contractor's activity. Click here to access our complete licensing and building permit database.
Experience
|
3 projects
|
Home Additions |
|
55 projects
|
Electrical projects |
Analyzing permits over the last 4 years shows that Edward C West Jr mostly works on
electrical project
and home addition
projects.
Pricing
|
49 projects
|
< $5k |
|
3 projects
|
$5k-$20k |
|
8 projects
|
$20k-$50k |
|
2 projects
|
$50k-$100k |
The typical size of their permits is approximately $1,900. This graph shows the distribution of these job values.
Pro tip:
For more details about their pricing, check out their recent activity to see how much they have charged for different types of work.
This is a sample of this contractor's permits. Click here to access their complete permit history.
Control wiring for - mitsubishi vrf system - run vrf communication trunk (16-2 awg) from condensers to 2 branch boxes and the 18 fan coil units (see drawing m-9) - run vrf communication (16-2 awg) from the condensers to the mmi (location tbd) - run vrf communication (16-2 awg) to the 18 room sensors (2) rooftops - run low voltage wiring for room sensor to each rooftop (location and qu... see more
Valuation:
$13,000
Permit #:
MISC-ELC-25-000382
Status:
issued
Fee:
$463
Permit Type:
Alteration
Building Type:
Commercial
Hardwiring a tesla wall connector evse mounted inside the garage and to set to 48 amps. installing 3/4 conduit and pulling #6 thhn/thwn-2 from the evse to the existing 200-amp main panel. we will install a 60-amp breaker to protect the evse. the evse has built-in gfci protection
Valuation:
$900
Permit #:
BLD25-01321
Status:
final
Fee:
$31
Permit Type:
N/A
Building Type:
N/A
Hardwiring an emporia evse set to 48 amps and mounted in the garage. pulling #6 mc back to the existing 200 amp main panel and installing a 60 amp breaker to feed the evse. also installing emporia powersmart load management to protect the evse from overloading the service. the evse has built-in gfci protection
Valuation:
$900
Permit #:
BLD25-00775
Status:
final
Fee:
$31
Permit Type:
N/A
Building Type:
N/A
Hardwiring an emporia evse mounted on an exterior wall of the home set to 48 amps pulling #6 mc and installing a 60-amp breaker in the existing 200-amp main panel to protect the evse. also installing emporia's powersmart load management to control the charger from overloading the electrical service. the evse has built-in gfci protection. fm requires a fire final inspection
Valuation:
$900
Permit #:
MISC-ELC-25-000540
Status:
issued
Fee:
$155
Permit Type:
Other
Building Type:
N/A
Install solar system size: 8.925kw dc panel type & count: (21_panels)jinko jkm425n-54hl4-b solar modules inverter type & count : (21_sets) enphase iq8mc-72-m-us (240v) micro inverters 8.925kw dc solar system using jinko 425 panels and enphase micro-inverters
Valuation:
$33,755
Permit #:
RES-SOLAR-25-000217
Status:
complete
Fee:
$1,432
Permit Type:
N/A
Building Type:
N/A
Hardwiring a chargepoint home flex evse set to 48 amps and mounted on the exterior wall of the home. installing 3/4 conduit and pulling #6 thhn/thwn-2 from the existing 200-amp main panel to the evse. installing a 60-amp breaker to protect the evse. the evse has built-in gfci protection
Valuation:
$900
Permit #:
MISC-ELC-25-000686
Status:
complete
Fee:
$155
Permit Type:
Other
Building Type:
N/A
200 amp service upgrade 240 volt single-phase underground service from 100-amps to 200-amps. existing 200-amp meter socket with 4/0 aluminum coming off the line side of the meter is pulled through a 3-inch pvc conduit leading back to the transformer. no shutdown needed. also hardwiring an emporia evse set to 48 amps mounted inside the home's garage. pulling #6 mc from the evse back to... see more
Valuation:
$2,900
Permit #:
BLD25-00878
Status:
final
Fee:
$62
Permit Type:
N/A
Building Type:
N/A
Install solar 15.30kw (36_panels) jinko solar jkm425n-54hl4-b solar modules and (36_sets) enphase iq8mc-72-m-us (240v) micro inverters gross system cost crs #20695715
Valuation:
$42,480
Permit #:
BLD25-00386
Status:
final
Fee:
$681
Permit Type:
N/A
Building Type:
N/A
Hardwiring an emporia evse mounted inside the garage set to 48 amps. pulling #6 mc from the existing 200-amp main panel to the evse. we will install a 60-amp breaker to protect the evse. the charger has built-in gfci protection
Valuation:
$900
Permit #:
BLD25-01249
Status:
final
Fee:
$31
Permit Type:
N/A
Building Type:
N/A
Hardwiring a chargepoint home flex evse mounted on the exterior wall of the home and set to 48 amps. feeding the evse with #6 mc and a 60amp breaker installed in the existing 200 amp main panel. the evse has built-in gfci protection
Valuation:
$1,900
Permit #:
64867
Status:
issued
Fee:
N/A
Permit Type:
N/A
Building Type:
N/A
Hardwiring an emporia evse mounted inside the garage set to 48 amps. pulling #6 mc from the existing 100-amp main panel to the garage and then changing to 3/4 emt and pulling #6 thhn/thwn-2 to the evse. we will install a 60-amp breaker to protect the evse. also we will install emporia load management to protect the evse from overloading the electrical service. the evse has built-in gf... see more
Valuation:
$1,900
Permit #:
BLD25-01119
Status:
final
Fee:
$46
Permit Type:
N/A
Building Type:
N/A
Installing a universal tesla wall connector evse set to 48 amps. pulling #6 mc back to the existing 200-amp main panel and installing a 60 amp breaker in the powershare v3 gateway. the v3 gateway will be mounted next to the current main panel. we will interrupt the line side conductors and route them to the v3 gateway where the new main breaker will be placed. the load side of the bre... see more
Valuation:
$2,900
Permit #:
BLD24-01138
Status:
final
Fee:
$62
Permit Type:
N/A
Building Type:
N/A
Hardwiring ford pro air conditioning charge station 80a evse mounted in the garage and set to 48 amps. running # 6 thhn/thwn-2 and #6 mc back to the existing 200 amp main electrical panel and installing a 60 amp breaker to feed it. evse has built-in gfci protection
Valuation:
$1,900
Permit #:
E-24-98
Status:
complete
Fee:
N/A
Permit Type:
Vehicle charging ...
Building Type:
N/A
Hardwiring emporia evse mounting outside on the home and setting it to 48 amps. pulling #6 mc from the ev charger back to the existing 100 amp main panel and installingf a 60 amp breaker. load management will be used to control the evse. the emporia charger has gfci protection built-in
Valuation:
$1,900
Permit #:
62841
Status:
issued
Fee:
N/A
Permit Type:
N/A
Building Type:
N/A
Hardwiring emporia ev charger set to 48 amps mounted on back wall of garage. installing a 60 amp breaker in the 200 amp main panel with an emporia vue load management device to protect the service from being overloaded. pulling 6/2 mc to feed the emporia evse
Valuation:
$1,900
Permit #:
E-24-7
Status:
complete
Fee:
N/A
Permit Type:
General wiring
Building Type:
Single family
Hardwiring emporia evse set to 48 amps and mounting it the garage. pulling #6 thhn back to the existing 200 amp main panel. there we will install a load management device and a 60 amp breaker for the evse. emporia evse has built-in gfci protection
Valuation:
$1,900
Permit #:
E-24-10
Status:
complete
Fee:
N/A
Permit Type:
Vehicle charging ...
Building Type:
N/A
Hardwiring emporia evse set to 48 amps mounting charger on the outside wall of the home. run #6 mc back to the existing 100 amp panel and install a 60 amp breaker. evse has built-in gfci protection. installing load management to controll evs
Valuation:
$1,900
Permit #:
BLD24-00398
Status:
final
Fee:
$46
Permit Type:
N/A
Building Type:
N/A
Installation of one dual port pole-pedestal level 2 electric vehicle charging station with associated wheel stops & signage located in side parking lot. the station operates on 60amp breaker on a 200-240 volt air conditioning circuit
Valuation:
$12,500
Permit #:
MISC-ELC-23-000919
Status:
issued
Fee:
$518
Permit Type:
Equipment install...
Building Type:
Commercial
Install conduit and wire to feed 2 - 50kw dcfc chargersinstall above ceiling emt conduit and underground pvc conduitinstall 2 new 480 volt 80 amp breakers in main switchgear2 – 1 4” conduits 1 for each charger3 - #1 thhn with a #4 ground to each charger2 – 100 amp 3r disconnect switchesinstall and wire dcfc’s
Valuation:
$90,000
Permit #:
E-23-987
Status:
issued
Fee:
N/A
Permit Type:
N/A
Building Type:
N/A
Hardwiring an gm ultium powerup evse mounted inside the garage and set to 48 amps. feeding the evse with #6 thhn/thwn-2 and a 60amp breaker installed in the existing 200 amp main panel. the evse has built-in gfci protection
Valuation:
$900
Permit #:
E-24-197
Status:
complete
Fee:
N/A
Permit Type:
Vehicle charging ...
Building Type:
Single family
Similar Contractors See more
License # ELC.0186535-E1
Danbury, CT
113
BZ Score
$4K
Avg Project
-
Projects
121
BZ Score
$16K
Avg Project
-
Projects
License # ELC.0206852-E1
Stratford, CT
114
BZ Score
$1.5K
Avg Project
-
Projects
Edward C West Jr Reviews
BuildZoom hasn't received any reviews for Edward C West Jr. Click here to be alerted when reviews are posted about them.
Recent Buildzoom Projects
Verified License
BuildZoom confirmed this contractor's license
Edward C West Jr License info
Verified License
| License # | ELC.0197545-E1 |
| Status | Active |
| State | Connecticut |
| Type | Electrical Unlimited Contractor |
| Date Issued | 10-01-2025 |
- BuildZoom verified this license was active as of May 2026.
Verify this license's status for Edward C West Jr at the Connecticut Department of Consumer Protection.
This is a sample of licensing data; click here to access a complete history.
108
BuildZoom Score
230
Permits
- Building permit records show that Edward C West Jr has worked on 230 permitted projects.
Edward C West Jr Employees
EW
Edward West