Location and Projects
Address
6 HOWARD IRELAND DRIVE, Norton, MA, 02766
Use our bidding system to
request a quote
Environmental Systems Engineering Corp
Environmental Systems Engineering Corp, 6 Howard Ireland Dr, Norton, MA (Owned by: Steven M. Dion) holds a Electrician license and 4 other licenses according to the Massachusetts license board.
Their BuildZoom score of 110 ranks in the top 4% of 139,240 Massachusetts licensed contractors.
Their license was verified as active when we last checked. If you are thinking of hiring Environmental Systems Engineering Corp, we recommend double-checking their license status with the license board and using our project planner to get competitive quotes.
Environmental Systems Engineering Corp Contact Information
Phone Number: (617) 296-9888
Edit
Address: 6 HOWARD IRELAND DRIVE, Norton, MA 02766
Edit
Do you work for this business? Unlock this free profile to update company info and see who's viewing your profile.
Environmental Systems Engineering Corp Norton
Quality
110
96th percentile
Pro tip:
We generally recommend hiring a contractor with a score higher than 95.
Environmental Systems Engineering Corp has a BuildZoom score of 110, which places them above 96% of 139,240 contractors in Massachusetts.
Activity
|
20 projects
|
2025 |
|
30 projects
|
2024 |
|
21 projects
|
2023 |
Our building permit records indicate that Environmental Systems Engineering Corp has worked on at least
71.0 projects over the past 3 years.
This is an overview of this contractor's activity. Click here to access our complete licensing and building permit database.
This is an overview of this contractor's activity. Click here to access our complete licensing and building permit database.
Experience
|
5 projects
|
Home Additions |
|
4 projects
|
Commercial Renovations |
Analyzing permits over the last 4 years shows that Environmental Systems Engineering Corp mostly works on
home addition
and commercial renovation
projects.
Pricing
|
17 projects
|
< $5k |
|
24 projects
|
$5k-$20k |
|
12 projects
|
$20k-$50k |
|
3 projects
|
$50k-$100k |
|
6 projects
|
$100k-$250k |
|
3 projects
|
$250k-$500k |
|
1 project
|
$500k-$1mil |
|
1 project
|
$1mil+ |
The typical size of their permits is approximately $11,514. This graph shows the distribution of these job values.
Pro tip:
For more details about their pricing, check out their recent activity to see how much they have charged for different types of work.
Building Permits by Environmental Systems Engineering Corp
This is a sample of this contractor's permits. Click here to access their complete permit history.
- demolish all duct and existing equipment - install new duct and vrf equipment - install new exhaust fan - terminate all connections to rgds and air balance at completion of project. sq ft is over 10 000 sq ft. renovation. work to be completed: hvac metal chimney vents air balancing
Valuation:
$600,000
Permit #:
BLD250611
Status:
issued
Fee:
$9,000
Permit Type:
N/A
Building Type:
N/A
We are adding a split system in the attic of the new addition on the 2nd floor and we are making some alterations to the existing split system to accommodate the new layout. we will be adding an erv as well and balancing the system once complete
Valuation:
$5,000
Permit #:
SH-25-0054
Status:
complete
Fee:
$100
Permit Type:
HVAC
Building Type:
1to2family
Furnish & install rtus split systems cond pumps flues spray booth exhaust exhaust duct gas heater relocated fans install duct mounted smoke detectors refrig cond piping & insul for new splits
Valuation:
$52,000
Permit #:
SMP-2025-0969
Status:
complete
Fee:
$811
Permit Type:
HVAC
Building Type:
Industrial
Selective demolish of duct work hot water piping & installing new duct supply exhaust and mua. install (1) new exhaust fan (4) unit heaters (1) split system and rgds. modifications to the hot water and chilled water existing systems and balancing
Valuation:
$13,656
Permit #:
M-25-1222
Status:
final
Fee:
$187
Permit Type:
Renovation
Building Type:
N/A
Provide and install one (1) new air-cooled modular chiller at 60 tons provide and install two (2) new chilled water pumps @ 375 gpm provide and install one (1) new chillled water storage tank provide and install two (2) variable frequency drives for chilled water pumps provide and install a complete piping system including future valve provide and install one (1) new gas fired roof mo... see more
Valuation:
$349,081
Permit #:
M-22-2128
Status:
issued
Fee:
$3,541
Permit Type:
Renovation
Building Type:
N/A
Furnish and install of the following:(1) vrf system (11) exhaust fans (5) elevator vents (26) electric heaters (3) condensers (12) louvers (158) fire dampers (563) remote dampers w associated rgd's ductwork and piping *all work must be in accordance with 780 cmr and brookline zoning by-laws
Valuation:
$5,384,000
Permit #:
MP-2023-000366
Status:
complete
Fee:
$107,680
Permit Type:
N/A
Building Type:
N/A
Replacement of existing non-functional hvac systems including right-sizing equipment for new occupant and equipment loads
Valuation:
$108,644
Permit #:
BP-2025-0936
Status:
complete
Fee:
$1,356
Permit Type:
Repair alteration...
Building Type:
N/A
Renovation of existing space: replacing 90 light fixtures lighting controls new 200a 480v panel new breakers throughout as needed 15 power receptacles & rework existing electrical feeds & wiring
Valuation:
$160,000
Permit #:
EP-2025-0281
Status:
issued
Fee:
$2,496
Permit Type:
N/A
Building Type:
N/A
6 exit signs with emergency lighting and remote heads for 6 egress locations and battery backup , 14 ebu’s 6 fixtures in loft area ceiling 5 exit signs with battery backup 6 flat panel fixtures for 20 general use receptacles (approx) dedicated circuits for break area appliances tv receptacle in break area rework existing wiring and lighting in areas not removed in demolish phase. powe... see more
Valuation:
$40,000
Permit #:
E-24-0395
Status:
final
Fee:
$450
Permit Type:
N/A
Building Type:
N/A
Disconnect and make safe • isolation demolish and removal of (4) ductless split systems and proper refrigerant recovery and documentation • refrigeration piping (flush and re-use where applicable) hp options will require new piping • condensate piping • flue/venting • sheet metal transitions • insulation of new work • start-up & commissioning
Valuation:
$28,800
Permit #:
M-24-1607
Status:
issued
Fee:
$338
Permit Type:
Replacement
Building Type:
N/A
Mob-3 suite 3-4a split systems the scope of this project would include the following: • make safe remove and discard the (3) existing lennox hs19-413v-3y rooftop condensing units • disassemble the suspended ceiling beneath each air handling unit (ahu) • make safe remove and discard the (3) existing ahus • install (3) new carrier split system condensing units of identical capacity on t... see more
Valuation:
$23,450
Permit #:
SM-24-31
Status:
suspended
Fee:
N/A
Permit Type:
N/A
Building Type:
N/A
Install a dual fuel hybrid rooftop unit • demolition and removal of existing hvac equipment: o rtu-6; york; zh090n15n4aaa5a; n1e0837121 • furnish and install; o one (1) 7.5-ton packaged rooftop unit with same capacities as existing unit • disconnect and re-connect electrical power wiring • disconnect and re-connect gas piping
Valuation:
$19,235
Permit #:
M-24-0669
Status:
issued
Fee:
$242
Permit Type:
Renovation
Building Type:
N/A
- some selective demolish - new duct distribution for (1) supply vav with hot water reheat & (1) exhaust vav - duct and pipe cover insulation - air and water balancing. sq ft is over 10 000 sq ft. renovation. work to be completed: hvac air balancing
Valuation:
$8,930
Permit #:
BLD243236
Status:
complete
Fee:
$134
Permit Type:
N/A
Building Type:
N/A
The scope of the work shall include the following: • cut cap and removal of existing hvac equipment duct and piping as shown on m-301 & m-302 • reutilization and relocation of existing drum louvers as noted on m-301 and m-303 • furnish and install; o three (3) indoor ducted computer room air conditioning units as scheduled o two (2) remote air cooled 25-ton condensing units for associ... see more
Valuation:
$11,600
Permit #:
SH-24-0587
Status:
issued
Fee:
$100
Permit Type:
HVAC
Building Type:
Office
Work being completed on attic level demo/make-safe of (1) existing split system. furnish and install of the following: (1) carrier indoor ahu (1) outdoor condensing unit (1) disconnect switch ductwork hangers + rods flush test and reutilize existing systems. disconnect and reconnect electrical wiring
Valuation:
$10,688
Permit #:
M-24-1385
Status:
issued
Fee:
$157
Permit Type:
Replacement
Building Type:
N/A
We will be doing some selective demolish on existing systems and will be installing a new erv and fan coil unit with assoc. duct systems to accommodate the new layout. we will make our terminations with rgd's and louvers. we will be air balancing at the conclusion of the installation of our new systems
Valuation:
$11,600
Permit #:
SH-24-0137
Status:
complete
Fee:
$186
Permit Type:
HVAC
Building Type:
Office
We will be doing some selective demolish on existing systems and will be installing a new erv and fan coil unit with assoc. duct systems to accommodate the new layout. we will make our terminations with rgd's and louvers. we will be air balancing at the conclusion of the installation of our new systems
Valuation:
$11,600
Permit #:
SH-24-0137
Status:
complete
Fee:
$186
Permit Type:
HVAC
Building Type:
Office
Replace existing units on same curbs with units that weight less. make safe remove and discard the existing the existing 20 ton data aire unit. remove and discard the data aire condenser from the roof. supply and install (2) new liebert 10 ton downflow computer room air conditioners with digital scroll compressors. supply and install (2) new liebert air cooled condensers on the roofto... see more
Valuation:
$171,965
Permit #:
M-22-0016
Status:
issued
Fee:
$2,064
Permit Type:
HVAC
Building Type:
Office
Shut down and make safe ? remove and disposal of one reznor mua serial# bbj72j3n17996 ? relocate one existing mua serial# bqk3060082479 o unit to be moved to the location of mua serial# bbj72j3n17996 ? reconnect ? install cap for the open curb ? roofing to seal the removed penetrations
Valuation:
$4,400
Permit #:
M-24-1914
Status:
issued
Fee:
$94
Permit Type:
Renovation
Building Type:
N/A
cut cap and make safe. demolition and disposal of existing boiler and pumps furnish and install the following o one (1) lochinvar fbn2001 o condensate neutralizer o boiler supply isolation valve o two (2) taco fi series pumps to meet existing capacity o two (2) pump suction diffusers o make piping modifications required for the new pump. o one (1) gate valve. o one (1) 4” taco f... see more
Valuation:
N/A
Permit #:
SM-2024-00008
Status:
issued
Fee:
$1,092
Permit Type:
N/A
Building Type:
N/A
Similar Contractors
License # 9258
Stoneham, MA
111
BZ Score
$14.6K
Avg Project
-
Projects
License # 1095
Seekonk, MA
106
BZ Score
$2K
Avg Project
-
Projects
License not required
Middleton, MA
108
BZ Score
$8.4K
Avg Project
-
Projects
Environmental Systems Engineering Corp Reviews
BuildZoom hasn't received any reviews for Environmental Systems Engineering Corp. Click here to be alerted when reviews are posted about them.
Recent Buildzoom Projects
Verified License
BuildZoom confirmed this contractor's license
Environmental Systems Engineering Corp License info
Verified License
| License # | 17482 |
| Status | Active |
| State | Massachusetts |
| Type | Electrician |
- BuildZoom verified this license was active as of November 2025.
Verify this license's status for Environmental Systems Engineering Corp at the Commonwealth of Massachusetts E-Licensing Board.
This is a sample of licensing data; click here to access a complete history.
Inactive License
| License # | 17482 |
| Status | Inactive |
| City | Newton |
| Type | Electrical Contractor |
- According to the City of Newton Massachusetts, the status of this license was at one point cancelled. However, this information may have changed. If this is your business, please update your license status.
Check this license's status for Environmental Systems Engineering Corp at the City of Newton Massachusetts.
This is a sample of licensing data; click here to access a complete history.
Inactive License
| License # | 17482 |
| Status | Inactive |
| City | Newton |
| Type | Electrical Contractor |
- According to the City of Newton Massachusetts, the status of this license was at one point cancelled. However, this information may have changed. If this is your business, please update your license status.
Check this license's status for Environmental Systems Engineering Corp at the City of Newton Massachusetts.
This is a sample of licensing data; click here to access a complete history.
Inactive License
| Status | Inactive |
| State | Massachusetts |
| Type | Sheet Metal Business |
- According to the Commonwealth of Massachusetts E-Licensing Board, the status of this license was at one point cancelled. However, this information may have changed. If this is your business, please update your license status.
Check this license's status for Environmental Systems Engineering Corp at the Commonwealth of Massachusetts E-Licensing Board.
This is a sample of licensing data; click here to access a complete history.
Inactive License
| License # | RC105129 |
| Status | Inactive |
| State | Massachusetts |
| Type | Refrigeration - Contractor License |
- According to the Massachusetts Department of Public Safety, the status of this license was at one point cancelled. However, this information may have changed. If this is your business, please update your license status.
Check this license's status for Environmental Systems Engineering Corp at the Massachusetts Department of Public Safety.
This is a sample of licensing data; click here to access a complete history.
110
BuildZoom Score
262
Permits
- Building permit records show that Environmental Systems Engineering Corp has worked on 262 permitted projects.
Environmental Systems Engineering Corp Employees
JB
James S Baldasaro
SD
Steven M Dion
Owner
SD
Steven M. Dion
Owner