EZ SIPS Jobsite-framed Structural Insulated Panels - Ultra Low-cost Green Building System

A breakthrough ultra low-cost GREEN way to frame and SUPER-INSULATE in one step!

Looking to green up your build without spending a bundle?

EZ SIPS is a REVOLUTIONARY, highly AFFORDABLE new way to super-insulate your walls to R-25+ while you frame!

At less than ½ THE COST OF FACTORY SIP systems, EZ SIPS Build-In-Place Structural Insulated Panels are changing the way homes are built.

The concept is simple: EZ SIPS are 4-foot wide EPS™ insulation panels that fit into 2×6” wall sections like a glove. It’s a new PATENT PENDING green building technology that enables framers to add high performance EPS insulation into their walls in just minutes!

Simple and EZ to use, EZ SIPS isan exciting new development that puts the power of rigid EPS™ insulation into framers’ hands for not much more than the cost of fiberglass batts!

EZ SIPS are 4-foot wide, wall-height blocks of 6¾” thick EPS™. They’re precisely routered with recesses for 2×6” studs and top/bottom plates, filling the spaces inside your walls with solid rigid closed cell insulation. Simply SLIDE EZ SIPS DOWN into your framing before you mount external plywood / OSB sheathing. It’s that EZ!

Now builders, framers and carpenters can build a VIRTUALLY AIRTIGHT, SUPER-INSULATED building envelope complete with a CONTINUOUS THERMAL BREAK with EZ SIPS eco-friendly foam-filled wall panels right on the jobsite!

It’s a total GAME-CHANGER. GREEN-UP your build in just minutes! NO MORE expensive pre-ordering factory pre-cut SIP panel systems, NO MORE messy spray foam!

EZ SIPS FEATURE A CONTINUOUS 1¾” thick outside flange of EPS, creating a THERMAL BREAK between framing and sheathing, MASSIVELY BOOSTING insulation efficiency to AT LEAST R-25. Remember EPS™ has TWICE the thermal efficiency of fiberglass!

EZ SIPS work with regular lumber, pre-cut length studs and tilt-up framing. For trades you just pull out the pre-cut vertical and horizontal foam channels from the exposed inner wall and insert your electrical and plumbing: EZ!

Imagine: ½ THE COST, no crane required, insulate as you build…and installing wiring and plumbing is a snap! How EZ is that?

We’re slashing the cost of building GREEN. With just 1 extra step added to the tilt-up framing method, EZ SIPS creates custom Build-In-Place SUPER-INSULATED wall sections right on the jobsite in just minutes! Simply bank 4-foot wide EZ SIPS panels side-by-side for the length of your wall mount your plywood or OSB sheathing and stand it up. It’s that EZ!

Consider the benefits:

FAST & EZ one-step installation into stick frame construction
HALF THE COST of pre-fab Structural Insulated Panels (SIPS)
TWICE AS EFFECTIVE as fiberglass: R-25 value increases with temperature differential
SAFE & FOOLPROOF tested to 2X standard wall strength; highly resistant to mold & mildew
EXPOSED, REMOVABLE CHANNELS for electrical, plumbing & bracing
FAST, EFFECTIVE AND AFFORDABLE. Why wouldn’t you choose EZ SIPS?

EZ SIPS panels are EZ to cut for infill framing details such as upper and lower sills. Build out solid wood areas like headers and king studs with 1¾” thick foam EZ SHEETS to complete the CONTINUOUS THERMAL BARRIER.