×

We'll help you find the right contractor.

Share your project details and we'll reach out to Green Energy Mechanical so you don't have to.

We'll also connect you with other vetted professionals who are a strong match for your project. That way, you can compare quotes, meet different contractors, and make the choice that feels right for you.

Get Started
G

Location and Projects

Address
480 Neponset St, Canton, MA, 02021
Use our bidding system to request a quote

Green Energy Mechanical

Green Energy Mechanical is a full-service HVAC contractor and plumbing company. We specialize in heating and cooling repairs as well as plumbing services in the Canton, MA area. We promise to help find the solution that we truly feel will benefit your home, whether it comes down to making a few repairs on your existing gas furnace, installing a brand-new heating and cooling system, or providing a plumbing repair.

From BuildZoom: Green Energy Mechanical, 480 Neponset St, Canton, MA (Owned by: Jonathan Neves) holds a Sheet Metal Business license and 3 other licenses according to the Massachusetts license board.

Their BuildZoom score of 108 ranks in the top 5% of 139,240 Massachusetts licensed contractors.

Their license was verified as active when we last checked. If you are thinking of hiring Green Energy Mechanical, we recommend double-checking their license status with the license board and using our project planner to get competitive quotes.

Green Energy Mechanical Services

Start a project today:

Green Energy Mechanical Contact Information

Phone: (781) 531-8608
Address: 480 Neponset St, Canton, MA 02021

Green Energy Mechanical Canton

Quality

108
95th percentile
Pro tip: We generally recommend hiring a contractor with a score higher than 95.
Green Energy Mechanical has a BuildZoom score of 108, which places them above 95% of 139,240 contractors in Massachusetts.

Activity

6 projects
2025
13 projects
2024
13 projects
2023
Our building permit records indicate that Green Energy Mechanical has worked on at least 32.0 projects over the past 3 years.

This is an overview of this contractor's activity. Click here to access our complete licensing and building permit database.

Experience

15 projects
HVAC projects
5 projects
Mechanical projects
Analyzing permits over the last 4 years shows that Green Energy Mechanical mostly works on hvac project and mechanical project projects.

Pricing

18 projects
< $5k
9 projects
$5k-$20k
2 projects
$20k-$50k
1 project
$50k-$100k
Value Not Public: 4.0 projects
The typical size of their permits is approximately $3,000. This graph shows the distribution of these job values.
Pro tip: For more details about their pricing, check out their recent activity to see how much they have charged for different types of work.

Building Permits by Green Energy Mechanical

Sort by: Notable Notable | Date Date | Job Value Job Value
Sheet metal
2024-02-20
New cold climate ducted heat pump installation: includes new energy efficient condenser and indoor air distribution system. includes connecting to existing rigid trunk ductwork existing zoning system with new ecobee thermostats
Valuation:
$33,000
Permit #:
SH-24-0159
Status:
final
Fee:
$396
Permit Type:
HVAC
Building Type:
1to2family
Sheet metal
2022-10-17
Includes full removal of existing undersized ductwork and oil fired furnace. includes a new energy efficient hyper heat condenser and air handler. includes all brand new supply and return trunk lines to supply the home with heating and cooling. includes all new ducts sealed with mastic and wrapped with r8 and r6 bubble wrap
Valuation:
$36,780
Permit #:
SH-22-1239
Status:
issued
Fee:
$444
Permit Type:
HVAC
Building Type:
1to2family
Plumbing permit
2024-03-06
Includes removal of the existing water heater installation of a 50 gallon heat pump hot water heater with copper piping valves fittings shut offs electrical connections and condensate removal system
Valuation:
$5,195
Permit #:
PL1577474
Status:
filed
Fee:
$25
Permit Type:
N/A
Building Type:
1-2fam
Plumbing permit
2023-02-07
Includes full installation of (up to) 98% efficient tankless on demand hot water heaterincludes connecting to gas line within 10 ft of the tankless locationincludes connecting to copper pipingincludes new code approved fresh air intake and exhuast venting
Valuation:
$2,000
Permit #:
PP-23-43
Status:
issued
Fee:
N/A
Permit Type:
N/A
Building Type:
N/A
Includes new energy efficient goodman condenser and indoor air distribution system. includes connecting to existing rigid trunk ductwork with new duct connections. includes sealing new connections so air doesnt leak out into unwanted areas
Valuation:
$1,000
Permit #:
SH-23-0098
Status:
issued
Fee:
$50
Permit Type:
HVAC
Building Type:
1to2family
Sheet metal
2024-02-26
Includes new energy efficient goodman condenser and indoor air distribution system. includes connecting to existing rigid trunk ductwork with new duct connections. 2ahu 2condensers
Valuation:
$17,000
Permit #:
SH-24-0113
Status:
issued
Fee:
$175
Permit Type:
N/A
Building Type:
N/A
3 ton air conditioning air handler to be switched out for a new air handler and a heat pump tied into existing ductwork
Valuation:
$15,923
Permit #:
SH-25-0082
Status:
issued
Fee:
$160
Permit Type:
N/A
Building Type:
1to2family
Sheet metal
2022-10-27
New energy efficient carrier condenser and indoor air distribution system connecting to existing rigid trunk ductwork with new duct connections adding 60 000 btu hot water coil connected and tested
Valuation:
$15,189
Permit #:
SH-22-0153
Status:
issued
Fee:
$120
Permit Type:
N/A
Building Type:
N/A
Sheet metal
2022-10-11
New heat pump air handler with 4 ton hp condenser. brand new duct with r6 insulation and branches seal with mastic tape. 2 zone operation one for 1st floor and one zone 2nd floor
Valuation:
$45,000
Permit #:
SH-22-0015
Status:
complete
Fee:
$580
Permit Type:
Newwork
Building Type:
1to2family
Includes new handler and outdoor condenser includes replacing all existing flex lines on the second floor of house all new connections to the existing ductwork will be sealed with mastic
Valuation:
$27,180
Permit #:
SH-22-0116
Status:
issued
Fee:
$280
Permit Type:
HVAC
Building Type:
1to2family
Residential mechanical - sheet metal
2025-08-29
Adding new ducted air handler and heat pump system to: basement and first floor** all work must be in accordance with 780 cmr and brookline zoning by-laws **
Valuation:
$60,000
Permit #:
MP-2025-000297
Status:
triage
Fee:
$1,260
Permit Type:
N/A
Building Type:
N/A
Replacement of a 75 gallon chimney vented hot water heater. 2 toilet rebuild kits. one in the basement and one on the first floor
Valuation:
$3,300
Permit #:
P-24-0283
Status:
issued
Fee:
$95
Permit Type:
Renovation
Building Type:
N/A
Sheet metal
2023-03-20
Install new bosch ducted heat pump air handler and outdoor condenser. includes zoning 1st and 2nd floor
Valuation:
$24,000
Permit #:
SH-23-0108
Status:
issued
Fee:
$240
Permit Type:
N/A
Building Type:
N/A
Residence sheet metal
2024-09-18
Install 4 zone ductless mini split hvac system. sq ft is under 10, 000 sq ft. new work. work to be completed: hvac
Valuation:
$19,000
Permit #:
BLD242534
Status:
complete
Fee:
$285
Permit Type:
N/A
Building Type:
N/A
Includes new handler and outdoor condenser includes replacing all existing flex lines on the second floor of house all new connections to the existing ductwork will be sealed with mastic
Valuation:
$27,180
Permit #:
SH-22-0116
Status:
issued
Fee:
$280
Permit Type:
HVAC
Building Type:
1to2family
Replacing existing navien 19900 btu tankless condensing gas water heater. we are running gas piping from meter into basement with (1) test
Valuation:
$1,000
Permit #:
G-22-0310
Status:
complete
Fee:
$105
Permit Type:
N/A
Building Type:
N/A
Remove basement ductwork and install new supply trunk with rigid ducts and hard round ductwork for all branches w less than 10 of insulated flex ductwork. seal all connections wrap ducts install new return duct on the wall of living room
Valuation:
$11,395
Permit #:
20060006
Status:
complete
Fee:
$240
Permit Type:
N/A
Building Type:
N/A
Building permit
2023-12-29
Remove and discard the existing heating/ac system. install new bosch heat pump system and adding a new return duct for adequate air flow
Valuation:
$17,000
Permit #:
BP-23-641
Status:
issued
Fee:
N/A
Permit Type:
N/A
Building Type:
N/A
New heat pump/air conditioning replacement and includes full disconnect and removal of existing furnace coil and condenser
Valuation:
$20,000
Permit #:
M-22-1129
Status:
issued
Fee:
$70
Permit Type:
New
Building Type:
N/A
New heat pump/air conditioning replacement and includes full disconnect and removal of existing furnace coil and condenser
Valuation:
$20,000
Permit #:
M-22-1129
Status:
issued
Fee:
$70
Permit Type:
New
Building Type:
N/A

Green Energy Mechanical Reviews

BuildZoom hasn't received any reviews for Green Energy Mechanical. Click here to be alerted when reviews are posted about them.
Please write a review about Green Energy Mechanical
1 Rate this contractor
Click stars to rate
2 Provide a detailed review of this contractor.