Heno Electrical Services at 1036 NORTH LAKE STREET, Burbank, CA 91502, held a Electrician license (#1026042) with the California contractors license board with an expiration date of 02-28-2027. We last verified the license was suspended on 07-28-2026.
Their BuildZoom score is 0 because we haven’t been able to verify an active license. As a result, they’re not ranked in the top 50% of 336,931 California contractors.
If you’re thinking about hiring them, we recommend double-checking their license status with your local licensing authority. Alternatively, use our bidding system to be easily matched to qualified, licensed professionals in your area.
[e-plan] new pv1 roof mounted solar system with battery backup consisting of 57 modules 57 microinverters and 2 x ess units. system size is 22.8kwdc/16.53kwac connected to an upgraded 400a 120/240v 1ph 3w service. panel upgrade to be permitted separately
Installation of roof-mounted microinverter/ac module solar photovoltaic system not exceeding a total air conditioning output of 10 kw interconnected to an air conditioning coupled energy storage system with a rating not exceeding 10 kw in a 1 or 2 family dwelling
Pv1 pc for installation of roof mounted solar panel. photovoltaic system includes 8 modules with 8 microinverters and 1 combiner box connected to existing service subpanel. system size is 2.8kw dc/2.4kw air conditioning
1.roof mounted installation of 22.00 kwdc solar system 2.main panel upgrade to 225 3.main braker derating from 200amp to 150 amp 4.enphase 10.08 kwh battery back up system 5. install 200amp backup panel with 100 amp breaker (sub panel)
Void - should be a revision to an existing permit. (e-plan) install enphase battery backup system to existing solar. (spv-2022-00138) 10.08 kwh installation. main breaker derating from 200 amp to 150 amp revision 5/2/2023 batteries relocated from outside to inside the garage
Pv1 pc for installation of roof mounted solar panels. photovoltaic system includes 14 modules with 14 microinverters and 1 combiner box connected to exsting service subpanel. system size is 5.6kw dc/4.2kw air conditioning
Note: permit fees are $0 due ab 1414. 1. roof mounted installation of 10.00 kwdc photovoltaic solar system 2.installation of 2 enphase iq battery backup 10 10.08 kwh total of 20.16 kwh 3.derate the main breaker to 175 amp
[eplan] install 13.20 kw dc roof mounted photovoltaic system and 10.5 kwh energy storage system. (33) modules with microinverters and ac-coupled energy storage battery. *note* msp shall be pulled under a separate permit
E-plans 1.roof mounted installation of 3.20 kwdc solar system total of 8 modules. 2. main panel upgrade to 225 amp with 200 amp breaker 3.installation of battery back up system 10.08 kwh total kw 13.28
Permit fee is $0.00 due to ab1414 [eplan] pv1 new rooftop mounted system rated at 24kw dc 17.4kwac with 60 modules micro-inverters and a new 125a load center. note mpu shall be under seperate express permit
Addendum to pemp-08-22-1245: update to breaker from 150amp to100amp main breaker installation of 4.4 kw roof mount photovoltaic system including 11 enphase microinverters with 11 rec 400 watt panels. system to tie into existing 150 amp main electrical service panel at existing single family residence. no ess. no generator shown. please note: all panels and inverters will be verified b... see more
Install new flush roof-mounted low-profile photovoltaic solar system. total solar panel modules quantity: 30 total inverters: 30 12.00 kw dc 10.81 kw air conditioning sq. ft. array area: 630 electrical service upgrade: no 1 enphase iq battery 10.5 kw per approved plans
Valuation:
N/A
Permit #:
SPV-2023-01307
Status:
final
Fee:
N/A
Permit Type:
N/A
Building Type:
N/A
Electrical
1741 N Correa Way, Los Angeles, CA, 90049
2023-12-07
Plan revisions and removal of energy storage system from permit scope. updated project details: 3.85 kw dc roof mounted photovoltaic system. (11) modules with microinverters. (((installation of roof-mounted microinverter/ac module solar photovoltaic system not exceeding a total air conditioning output of 10 kw interconnected to an air conditioning coupled energy storage system with a ...
We are installing 26 solar panels (canadian solar 395w cs3u-395ms) and one solaredge inverter. the solar panels will be installed on the roof and the system size is 10.27 kw dc. we also need to upgrade the main electrical panel to 225/200 amp
Install roof mounted solar system at 7.90kw with 20 modules. (revision) main service panel changed to bottom fed #2 solar panel layout changed on page pv1.pv2 page pv-4
According to the California Contractors State License Board, the status of this license was at one point cancelled. However, this information may have changed. If this is your business, please update your license status.
Check this license's status for Heno Electrical Services at the California Contractors State License Board.
This is a sample of licensing data; click here to access a complete history.