Updated: Feb 28, 2026
Location and Projects
Address
154 PHEASANT DR, Galt, CA, 95632
Use our bidding system to
request a quote
Hunts Electrical Services
Hunts Electrical Services, 154 Pheasant Dr, Galt, CA (Employee: Alec Anthony Hunt) holds a Electrical license according to the California license board.
Their BuildZoom score of 109 ranks in the top 5% of 336,931 California licensed contractors.
Their license was verified as active when we last checked. If you are thinking of hiring Hunts Electrical Services, we recommend double-checking their license status with the license board and using our bidding system to get competitive quotes.
Hunts Electrical Services Contact Information
Phone Number: (209) 747-9311
Edit
Address: 154 PHEASANT DR, Galt, CA 95632
Edit
Do you work for this business? Unlock this free profile to update company info and see who's viewing your profile.
Hunts Electrical Services Galt
Quality
109
95th percentile
Pro tip:
We generally recommend hiring a contractor with a score higher than 95.
Hunts Electrical Services has a BuildZoom score of 109, which places them above 95% of 336,931 contractors in California.
Activity
|
28 projects
|
2025 |
|
5 projects
|
2024 |
Our building permit records indicate that Hunts Electrical Services has worked on at least
33.0 projects over the past 2 years.
This is an overview of this contractor's activity. Click here to access our complete licensing and building permit database.
This is an overview of this contractor's activity. Click here to access our complete licensing and building permit database.
Experience
|
32 projects
|
Electrical projects |
Analyzing permits over the last 4 years shows that Hunts Electrical Services mostly works on
electrical project
projects.
Pricing
|
26 projects
|
< $5k |
|
3 projects
|
$5k-$20k |
|
2 projects
|
$20k-$50k |
The typical size of their permits is approximately $2,828. This graph shows the distribution of these job values.
Pro tip:
For more details about their pricing, check out their recent activity to see how much they have charged for different types of work.
Building Permits by Hunts Electrical Services
This is a sample of this contractor's permits. Click here to access their complete permit history.
E-permit: applicant's detailed description: - electrical permit -remove old existing riser and rigid pipe on side of the building; riser for main service feed must be replaced and re strapped to side of building. new 3/0 wire service feed will be fed in a new 2 inch rigid pipe to the roof of the building; weather head and flashing set on the roof as well siliconed and strapped to roof... see more
Valuation:
$6,230
Permit #:
BP25-01401
Status:
canceled
Fee:
$272
Permit Type:
N/A
Building Type:
N/A
E-permit: applicant's detailed description: upgrade of old 100 amp main zinsco panel; service feed drop is located at corner of house while main panel is in the center of the backside of home; service feed runs through the attic to the main panel; will re establish new 200 amp main panel at the the corner of home where service drop enters; will convert the old zinsco 100 amp main pane... see more
Valuation:
$5,355
Permit #:
BP25-00515
Status:
final
Fee:
$248
Permit Type:
N/A
Building Type:
N/A
Aa: - installation of ev rated nema 14-50 plug within garage; wire for the plug is already within the garage; will connect wire to plug and land within the panel on a 60 amp breaker and label underground service adding 1 outlets (240v)
Valuation:
$375
Permit #:
BP25-00471
Status:
final
Fee:
$82
Permit Type:
N/A
Building Type:
N/A
Electrical permit: removal of old 100 amp meter service pipe feed & panel on property. install of new 200 amp meter panel and new sub panel within the home. carbon monoxide & smoke alarms required. reference crc sections r315 & r314
Valuation:
$3,130
Permit #:
RES-2506117
Status:
final
Fee:
$94
Permit Type:
N/A
Building Type:
Single family
Electrical service panel replacement or emergency repair only. no additional electrical mechanical plumbing or structural work permitted.; remove old 100 amp zinsco panel and upgrade to new 200 amp square d main panel
Valuation:
$2,835
Permit #:
PANR2025-00076
Status:
issued
Fee:
$165
Permit Type:
N/A
Building Type:
N/A
E-permit: applicant's detailed description: removal & replacement of 100 amp federal pacific stablok panel for new 200 amp square d main panel; existing panel 100 amps - overhead service new main panel 200 amps new install weather head/masthead work main breaker replacement residential customer acknowledgment: the installation of a surge-protective device (spd) is required in accordan... see more
Valuation:
$2,810
Permit #:
BP25-04690
Status:
final
Fee:
$159
Permit Type:
N/A
Building Type:
N/A
E-permit: applicant's detailed description: tapping off existing 20 amp arc fault protected gfci exterior plug and trenching running underground pvc for new gfci exterior plug near gazeebo in the backside of the backyard; existing panel 200 amps - underground service. subject to field inspection
Valuation:
$800
Permit #:
BP25-04689
Status:
final
Fee:
$82
Permit Type:
N/A
Building Type:
N/A
Residential electrical - remove (e) 200a panel - replace with subpanel. install new 200a panel in new location
Valuation:
$4,684
Permit #:
25-09-216E
Status:
issued
Fee:
$148
Permit Type:
N/A
Building Type:
Residential-other
Single family - installation of several dedicated circuits for air conditioning 120 volt appliances & spa circuits; conduit runs for the dedicated circuits are required on the outside of the house
Valuation:
$1,255
Permit #:
25-05-293E
Status:
issued
Fee:
$100
Permit Type:
N/A
Building Type:
Single family
Electrical service panel replacement or emergency repair only. no additional electrical mechanical plumbing or structural work permitted.; 200 main panel upgrade from old 100 amp zinsco panel
Valuation:
$3,980
Permit #:
PANR2025-00086
Status:
canceled
Fee:
$165
Permit Type:
N/A
Building Type:
N/A
Aa: existing panel 100 amps - overhead service new main panel 200 amps reuse existing weather head/masthead work residential customer acknowledgment: the installation of a surge-protective device (spd) is required in accordance with article 230.67 of the california electrical code. the spd shall be an integral part of the service equipment or shall be located immediately adjacent thereto
Valuation:
$2,820
Permit #:
BP24-05953
Status:
final
Fee:
$159
Permit Type:
N/A
Building Type:
N/A
Overhead service r/r 200amp panel with new like for like r/r 60amp subpanel with new like for like. carbon monoxide & smoke alarms required. reference crc sections r315 & r314. all work subject to field inspection
Valuation:
$2,906
Permit #:
RES-2406670
Status:
final
Fee:
$583
Permit Type:
N/A
Building Type:
Single family
E-permit: applicant's detailed description: installation of new 100 amp sub panel; relocation of multiple circuits from 200 amp main panel into new 100 amp sub panel; - underground service. subject to field inspection
Valuation:
$5,270
Permit #:
BP25-04376
Status:
final
Fee:
$248
Permit Type:
N/A
Building Type:
N/A
E-permit: existing panel 200 amps - underground service new main panel 200 amps reuse existing weather head/masthead work main breaker replacement
Valuation:
$2,710
Permit #:
RES-2508157
Status:
final
Fee:
$91
Permit Type:
N/A
Building Type:
Single family
E-permit: existing panel 125 amps - underground service new main panel 125 amps reuse existing weather head/masthead work main breaker replacement
Valuation:
$2,360
Permit #:
RES-2502691
Status:
final
Fee:
$91
Permit Type:
N/A
Building Type:
Single family
Electrical service panel replacement or emergency repair only. no additional electrical mechanical plumbing or structural work permitted.; removal of old 100 amp overhead fed panel and replaced for 200 amp overhead panel
Valuation:
$2,500
Permit #:
PANR2024-00957
Status:
complete
Fee:
$165
Permit Type:
N/A
Building Type:
N/A
Residential-other - old 100 amp zinsco panel will be removed and replaced with new 200 amp square d main meter panel
Valuation:
$3,250
Permit #:
25-04-063E
Status:
final
Fee:
$132
Permit Type:
N/A
Building Type:
Residential-other
E-permit: existing panel 200 amps - underground service adding 1 outlets (240v)
Valuation:
$3,165
Permit #:
RES-2511152
Status:
final
Fee:
$94
Permit Type:
N/A
Building Type:
Single family
E-permit: existing panel 200 amps - overhead service adding 1 outlets (240v)
Valuation:
$1,145
Permit #:
RES-2503321
Status:
final
Fee:
$88
Permit Type:
N/A
Building Type:
Single family
Aa: - overhead service main breaker replacement. changing the scope of work to mpu 100a to 100a like for like- (permit no longer owner builder but contractor)
Valuation:
$2,000
Permit #:
BP24-06867
Status:
expired
Fee:
$159
Permit Type:
N/A
Building Type:
N/A
Similar Contractors See more
146
BZ Score
$763
Avg Project
-
Projects
License # 1095396
Walnut Creek, CA
132
BZ Score
$7.5K
Avg Project
-
Projects
131
BZ Score
$1.6K
Avg Project
-
Projects
Hunts Electrical Services Reviews
BuildZoom hasn't received any reviews for Hunts Electrical Services. Click here to be alerted when reviews are posted about them.
Recent Buildzoom Projects
Let us find you an electrician in your area today
We'll search our vast network of Electricians and connect
you with one that meets your needs today.
Verified License
BuildZoom confirmed this contractor's license
Hunts Electrical Services License info
Verified License
| License # | 1106619 |
| Status | Active |
| State | California |
| Type | Electrical |
| Business Type | Sole Ownership |
- BuildZoom verified this license was active as of February 2026.
Verify this license's status for Hunts Electrical Services at the California Contractors State License Board.
This is a sample of licensing data; click here to access a complete history.
109
BuildZoom Score
Bonded
| Bonded Agent | This License Filed A Contractor's Bond With |
| Bond Value | $25,000 |
Insured
| Workers Comp Provider | Technology Insurance Company Inc |
32
Permits
- Building permit records show that Hunts Electrical Services has worked on 32 permitted projects.
Hunts Electrical Services Employees
AH
Alec Anthony Hunt
Sole Owner