×

We'll help you find the right contractor.

Share your project details and we'll reach out to Kappl Heating & Air Conditioning so you don't have to.

We'll also connect you with other vetted professionals who are a strong match for your project. That way, you can compare quotes, meet different contractors, and make the choice that feels right for you.

Get Started

Location and Projects

Address
8523 Canoga Ave, Canoga Park, CA, 91304
Use our bidding system to request a quote

Kappl Heating & Air Conditioning

Kappl Heating and Air Conditioning is your one source for Trane Heating and Cooling Products. At Kappl, customer satisfaction comes first and we want to ensure that your family is comfortable inside no matter what the weather is outside. Kappl Heating and Air Conditioning has been performing quality HVAC service and installation of new or replacement systems for homeowners and contractors all over the San Fernando Valley and surrounding areas Since 1987

From BuildZoom:

Kappl Heating & Air Conditioning at 8523 Canoga Ave, Canoga Park, CA 91304, held a HVAC/Mechanical Contractor license (#568869) with the California contractors license board with an expiration date of 05-31-1999. We last verified the license was inactive on 05-21-2026.

Their BuildZoom score is 0 because we haven’t been able to verify an active license. As a result, they’re not ranked in the top 50% of 336,931 California contractors.

If you’re thinking about hiring them, we recommend double-checking their license status with your local licensing authority. Alternatively, use our project planner to be easily matched to qualified, licensed professionals in your area.

Kappl Heating & Air Conditioning Services

Start a project today:

Kappl Heating & Air Conditioning Contact Information

Phone: (818) 532-5080
Address: 8523 Canoga Ave, Canoga Park, CA 91304

Building Permits by Kappl Heating & Air Conditioning

Sort by: Notable Notable | Date Date | Job Value Job Value
Remove existing system from home. hang new air handler coil and plenums in attic using uni-strut and threaded rod. set condenser on side of home in existing location. modify and hook up electrical and refrigerant lines. change out duct trunk line taking care of bedrooms. install new thermostat
Valuation:
N/A
Permit #:
23044-90000-13188
Status:
final
Fee:
N/A
Permit Type:
1 or 2 family dwe...
Building Type:
N/A
Remove existing system from home. modify electrical in closet. install new air handler in closet. set condenser outside of home. modify and hook up electrical and refrigerant lines install new thermostat. start up system and check for proper a operation
Valuation:
N/A
Permit #:
23044-90000-12434
Status:
final
Fee:
N/A
Permit Type:
Apartment
Building Type:
N/A
Remove existing system from home. hang new air handler coil and plenums in attic using uni-strut and threaded rod. set condenser on side of home. modify and hook up refrigerant and electrical to new units. replace all ducting in attic with r8 insulated ducting. start up system and check for proper operation
Valuation:
N/A
Permit #:
23044-90000-05777
Status:
final
Fee:
N/A
Permit Type:
1 or 2 family dwe...
Building Type:
N/A
Remove existing system from home. hang new air handler and coil in attic using unistrut and threaded rod. set condenser in new location on side side of home. run new refrigerant lines connecting coil to condenser. electrical for condenser to be run by electrician (not included in this proposal). modify and hook up existing ducting to new unit. wrap and strap existing ducting correctly... see more
Valuation:
N/A
Permit #:
23044-90000-03487
Status:
final
Fee:
N/A
Permit Type:
1 or 2 family dwe...
Building Type:
N/A
Remove existing system from home. cap water lines currently going to air handler. hang new air handler coil and plenums in atttic using uni-strut and threaded rod. set condenser in existing location. modify and hook up electrical and refrigerant lines. run new r8 ducting in attic. install new thermostat
Valuation:
N/A
Permit #:
23044-90000-02254
Status:
final
Fee:
N/A
Permit Type:
1 or 2 family dwe...
Building Type:
N/A
Remove existing unit from home. hang new air handler coil and plenums in attic using uni-strut and threaded rod. set condenser on new pad on side of home. modify and hook up electrical and refrigerant lines. install new thermostat. cut in new or enlarge return air to allow system to breath better. start up and check for proper operation
Valuation:
N/A
Permit #:
23044-90000-02270
Status:
final
Fee:
N/A
Permit Type:
1 or 2 family dwe...
Building Type:
N/A
Remove exiting unit and curb from roof. install new factory curb onto roof. install new return in bottom of unit and cut in new register in hall way. modify existing return duct and hook up to existing return grill in hallway. crane and set new package unit onto new stand. hook up existing ducting on roof. modify and hook up electrical lines. start up system and check for proper opera... see more
Valuation:
N/A
Permit #:
23044-90000-00695
Status:
final
Fee:
N/A
Permit Type:
1 or 2 family dwe...
Building Type:
N/A
Remove existing system from roof. set new adjustable curb over hole thru roof. install new plenums. crane and set new unit onto curb. modify and hook up electrical. replace all ducting in attic using r8 insulated duct. cut in new return. return grille in laundry room to be capped off in attic. install new thermostat
Valuation:
N/A
Permit #:
22044-90000-16200
Status:
final
Fee:
N/A
Permit Type:
1 or 2 family dwe...
Building Type:
N/A
Remove existing system from home. hang new air handler coil and plenums in attic using uni-strut and threaded rod. set condenser in existing location. modify and hook up electrical and refrigerant lines. replace all ducting in attic using r8 insulated ducting. start up and check for proper operation. will be using existing thermostat
Valuation:
N/A
Permit #:
23044-90000-12828
Status:
final
Fee:
N/A
Permit Type:
1 or 2 family dwe...
Building Type:
N/A
Remove existing unit and curb from roof. install new curb and plenums (roofing not included if needed). crane and set new unit onto curb. modify electrical and hook up to new unit. connect existing ducting to new plenums. enlarge or addition new return air to allow unit to blow proper airflow. install new thermostat
Valuation:
N/A
Permit #:
22044-90000-15633
Status:
final
Fee:
N/A
Permit Type:
1 or 2 family dwe...
Building Type:
N/A
Remove existing system from home. hang new air handler coil and plenums in attic using uni-strut and threaded rod. set condenser in side of home. hook up electrical and refrigerant lines. modify ducting and install new 3 zone zone system. install new ducting in addition on section of home
Valuation:
N/A
Permit #:
22044-90000-14225
Status:
final
Fee:
N/A
Permit Type:
1 or 2 family dwe...
Building Type:
N/A
Remove existing system from home. hang new air handler coil and plenums in attic using uni-strut and threaded rod. set condenser in side of home. hook up electrical and refrigerant lines. modify ducting and install new 3 zone zone system. install new ducting in addition on section of home
Valuation:
N/A
Permit #:
22044-90000-12844
Status:
final
Fee:
N/A
Permit Type:
1 or 2 family dwe...
Building Type:
N/A
Remove existing system from home. vacuum out return chamber and inspect (bottom may need to be sealed by other). set new air handler on existing stand. set condenser in existing location. modify and hook up refrigerant lines. install new safety disconnect and hook up electrical. move existing register in west bedroom to center of room. install new thermostat
Valuation:
N/A
Permit #:
22044-90000-11957
Status:
final
Fee:
N/A
Permit Type:
1 or 2 family dwe...
Building Type:
N/A
Remove existing system from home. hang new air handler coil and plenums in attic using uni-strut and threaded rod. move condenser to side of home. run new refrigerant line and connect coil to condenser. electrical for condenser will be run by electrician. hook up existing ducting to new unit. check ducting for proper installation. install new thermostat. start up system and check for ... see more
Valuation:
N/A
Permit #:
22044-90000-11668
Status:
final
Fee:
N/A
Permit Type:
1 or 2 family dwe...
Building Type:
N/A
Remove existing system from home. hang new air handler and coil in attic using uni-strut and threaded rod. install new heavy gauge metal stand on roof (optional). crane and set new condenser onto stand. modify and hook up electrical and refrigerant lines. connect existing ducting to new unit. start up and check for proper operation
Valuation:
N/A
Permit #:
22044-90000-11443
Status:
final
Fee:
N/A
Permit Type:
1 or 2 family dwe...
Building Type:
N/A
Remove existing system and ducting from home. install new air handler and coil in closet. set condenser on side of home. modify and hook up electrical and refrigerant lines. install new r8 insulated ducting in attic connecting new system to existing register boxes. install new thermostat
Valuation:
N/A
Permit #:
22044-90000-10236
Status:
final
Fee:
N/A
Permit Type:
1 or 2 family dwe...
Building Type:
N/A
Remove existing system and accessible ducting from home. hang new air handler coil and plenums in attic using uni-strut and threaded rod. set condenser in existing location in back of home. modify and hook up electrical and refrigerant lines. install all new r8 ducting where accessible. install new thermostat
Valuation:
N/A
Permit #:
22044-90000-07456
Status:
final
Fee:
N/A
Permit Type:
1 or 2 family dwe...
Building Type:
N/A
Remove existing system from home. set new air handler and coil in existing location. set new condenser in existing location. install new refrigerant lines. modify and hook up electrical lines. hook up existing duct work to new system. install new thermostat
Valuation:
N/A
Permit #:
22044-90000-05769
Status:
final
Fee:
N/A
Permit Type:
1 or 2 family dwe...
Building Type:
N/A
Remove existing system from home. crane and set new condenser on existing pad. install new air handler and coil in closet. modify electrical and refrigerant lines and hook up to new system. install new thermostat. start up and check for proper operation
Valuation:
N/A
Permit #:
22044-90000-05559
Status:
final
Fee:
N/A
Permit Type:
Commercial
Building Type:
N/A
Remove existing system from home. set condenser in the back of home in existing location. install new air handler and coil in closet. modify and hook up refrigerant lines. install new electrical disconnect. install new thermostat. start up and check for proper operation
Valuation:
N/A
Permit #:
22044-90000-05538
Status:
final
Fee:
N/A
Permit Type:
1 or 2 family dwe...
Building Type:
N/A

Kappl Heating & Air Conditioning Reviews

BuildZoom hasn't received any reviews for Kappl Heating & Air Conditioning. Click here to be alerted when reviews are posted about them.
Please write a review about Kappl Heating & Air Conditioning
1 Rate this contractor
Click stars to rate
2 Provide a detailed review of this contractor.