Remove existing roof down to existing substrate supply vapor barrier, 3 layers of insulation to achieve r-value 30, supply and install pvc fullyadhered membrane, supply and install throughwall flashing and new metal on perimeter
Remove existing roof down to existing substrate supply 2 layers of insulation with a fully adhered epdm roof system with new metal on perimeter. remove existing skylight frame in opening to receive new roof hatch
Remove and dispose of existing rubber roof and tar and gravel roof down to existing deck. supply and install 1 layer of 6 mill poly and 2 layers of rigid insulation with r-value 30.supply and install new epdm fully adhered roof system. supply and install new metal on perimeter
Building Type:
Commercial
Remove and dispose of loose gravel supply and install 2 layers of 2.6 of insulation mechanically attached the deck with 3 plates and screws.supply and install a fully adhered 060 epdm single ply roof system
Building Type:
Commercial
Remove existing tar and gravel and rubber roof system down to existing deck.replace any deteriorated decking with 3/4 plywood if needed.supply and install a new fully adhered epdm roof system over 2 layers of rigid insulation which will be mechanically attached to the existing decking
Supplying and installing 1x4 pt strapping on existing cmu block wall and installing metal wall panel system - back alley of 870 commonwealth ave
Building Type:
Retail store
Supply materials and labor to repoint west wall and north wall.remove and replace to stone parapet caps at roof level
Remove existing roof down to existing substrate supply vapor barrier, 3 layers of insulation to achieve r-value 30, supply and install pvc fullyadhered membrane, supply and install throughwall flashing and new metal on perimeter
Removing existing roof system, installing vapor barrier, install multiple layers of insulation with r-value 30 with insulation adhesive, installing a 060 pvc single ply fully adhered membrane. replacing the existing through wall flashing on rising walls with new stainless steal through wall flashing
Removing existing through wall flashing and supplying new through wall flashing.removing existing roof system down to concrete deck, supplying and installing a self adhered vapor barrier, adhering 3 layers of rigid insulation with r-value 30 and installing a new fully adhered pvc membrane
Remove and dispose of existing single ply roof system, leave existing built up roof (tested positive for asbestos )supply 1 layer of 2 insulation and 1 layer of 3/4 osb board mechanically attached.supply fully adhered epdm single ply roof system. supply new copper gutters to match existing
Roof replacement
Building Type:
904 private colle...
Remove existing 1= polyisosyanurate insulation down to existing tar and gravel roof, supply and install new 060 single ply membrane of roof over new poyisosyanurate insulation
New constuction of single family cape style dwelling with3 bedrooms 2 baths 1 car garage 1 deck***as per order of conditions - conservation commission****
Permit Type:
B residential new
Install anchor piping and flex connector. new stove 2nd floor. apartment. d
Permit Type:
Minor 1 inspection
Building Type:
Multi family 3 or...
Install anchor piping and flex connector 2nd floor apartment. f
Permit Type:
Minor 1 inspection
Building Type:
Multi family 3 or...
Addition handicapped bathroom 1st floor