Updated: Jul 12, 2026
Location and Projects
Address
1451 Heritage Pkwy, Mansfield, TX, 76063
Use our bidding system to
request a quote
Kmp plumbing, Heating & Air Photos
Kmp plumbing, Heating & Air
We are a family-owned and operated plumbing, heating, and air service and repair shop located right off Heritage Parkway, and are proud to be the trusted, plumbing, heating, and air professionals for locals to call for 24hr emergency service, or advice on tankless water heaters, drains, ac repair, installs and more. We offer residential and commercial plumbing, heating, and air service, new construction, remodels, installations, and repairs. Scheduling service online is easy!
From BuildZoom: Kmp plumbing, Heating & Air, 1451 Heritage Pkwy, Mansfield, TX holds a Plumbing license and 1 other license according to the Plano license board.
Their BuildZoom score of 119 ranks in the top 1% of 222,249 Texas licensed contractors.
Their license was verified as active when we last checked. If you are thinking of hiring Kmp plumbing, Heating & Air, we recommend double-checking their license status with the license board and using our bidding system to get competitive quotes.
Kmp plumbing, Heating & Air Mansfield
Quality
119
99th percentile
Pro tip:
We generally recommend hiring a contractor with a score higher than 95.
Kmp plumbing, Heating & Air has a BuildZoom score of 119, which places them above 99% of 222,249 contractors in Texas.
Activity
|
26 projects
|
2025 |
|
26 projects
|
2024 |
|
37 projects
|
2023 |
Our building permit records indicate that Kmp plumbing, Heating & Air has worked on at least
89.0 projects over the past 3 years.
This is an overview of this contractor's activity. Click here to access our complete licensing and building permit database.
This is an overview of this contractor's activity. Click here to access our complete licensing and building permit database.
Experience
|
3 projects
|
Home Additions |
|
3 projects
|
New Constructions |
|
16 projects
|
HVAC projects |
|
11 projects
|
Mechanical projects |
Analyzing permits over the last 4 years shows that Kmp plumbing, Heating & Air mostly works on
hvac project
and mechanical project
projects.
Pricing
|
15 projects
|
< $5k |
|
5 projects
|
$5k-$20k |
|
2 projects
|
$1mil+ |
The typical size of their permits is approximately $3,000. This graph shows the distribution of these job values.
Pro tip:
For more details about their pricing, check out their recent activity to see how much they have charged for different types of work.
Building Permits by Kmp plumbing, Heating & Air
This is a sample of this contractor's permits. Click here to access their complete permit history.
Recovery refrigerant from existing system and dispose of properly. remove existing system and dispose of properly. flush existing copper line set. install a unistrut saddle with cable and locks if applicable. upstairs install new 2 ton trane 16 seer 2 sta
Valuation:
N/A
Permit #:
BM-23-02263
Status:
issued
Fee:
N/A
Permit Type:
N/A
Building Type:
N/A
Recovery refrigerant from existing system and dispose of properly. remove existing system and dispose of properly. flush existing copper line set. install a new filter return base. install new 3 ton trane 17 seer heat pump new disconnect whip and pad
Valuation:
N/A
Permit #:
BM-23-00755
Status:
issued
Fee:
N/A
Permit Type:
N/A
Building Type:
N/A
Change out failed 4 ton heat pump system. outside: pump down and/recover system refrigerant remove old heat pump and disconnect disconnect copper lineset level ground install new condenser pad install new disconnect install new heat pump instal
Valuation:
N/A
Permit #:
BM-23-02024
Status:
issued
Fee:
N/A
Permit Type:
N/A
Building Type:
N/A
Changout 5 ton condenser and air handler in in attic. outside: pump down and/recover system refrigerant remove old condenser and disconnect remove old condenser pad flush copper lineset level ground install new condenser pad install new disconnec
Valuation:
N/A
Permit #:
BM-23-01769
Status:
issued
Fee:
N/A
Permit Type:
N/A
Building Type:
N/A
Remove existing existing equipment and depose of properly. i stall new trane 17 seer 2 stage 4 ton and 3 ton. purge with dry nitrogen while brazing and leak check with nitrogen and pull vacuum to 500 microns or better and charge system.
Valuation:
N/A
Permit #:
BM-23-01561
Status:
issued
Fee:
N/A
Permit Type:
N/A
Building Type:
N/A
Recovery refrigerant from existing system and dispose of properly. remove existing system and dispose of properly. flush existing copper line set. install a unistrut saddle with cable and locks if applicable. install new 3.5 ton york 16 seer condenser ne
Valuation:
N/A
Permit #:
23-01645
Status:
canceled
Fee:
N/A
Permit Type:
N/A
Building Type:
N/A
Changout full 4 ton furnace system. remove old unit from attic and outside slab. install new unistrut saddle cable/locks condensate drain pan rebuild and flush out condensate lines install water safety switch install new 4 ton furnace rerun gas flex
Valuation:
N/A
Permit #:
23-02519
Status:
canceled
Fee:
N/A
Permit Type:
N/A
Building Type:
N/A
Recovery refrigerant from existing system and dispose of properly. remove existing system and dispose of properly. flush existing copper line set. install a unistrut saddle with cable and locks if applicable. install new 2.5 ton trane 15.2 seer condenser
Valuation:
N/A
Permit #:
23-04374
Status:
canceled
Fee:
N/A
Permit Type:
N/A
Building Type:
N/A
Recovery refrigerant from existing system and dispose of properly. remove existing system and dispose of properly. flush existing copper line set. install a unistrut saddle with cable and locks if applicable. upstairs install new 2 ton trane 16 seer 2 sta
Valuation:
N/A
Permit #:
23-02263
Status:
canceled
Fee:
N/A
Permit Type:
N/A
Building Type:
N/A
Install new 3 ton trane 14 seer condenser new disconnect whip and pad. install new trane 80% gas furnace with evaporator coil condensate safety switch to help prevent water damaged from clogged condensate drain. hard pipe gas line out of the furnace c
Valuation:
N/A
Permit #:
23-04260
Status:
canceled
Fee:
N/A
Permit Type:
N/A
Building Type:
N/A
Recovery refrigerant from existing system and dispose of properly. remove existing system and dispose of properly. flush existing copper line set. install a new filter return base. install new 3 ton trane 17 seer heat pump new disconnect whip and pad
Valuation:
N/A
Permit #:
23-00755
Status:
complete
Fee:
N/A
Permit Type:
N/A
Building Type:
N/A
Change out failed 4 ton heat pump system. outside: pump down and/recover system refrigerant remove old heat pump and disconnect disconnect copper lineset level ground install new condenser pad install new disconnect install new heat pump instal
Valuation:
N/A
Permit #:
23-02024
Status:
canceled
Fee:
N/A
Permit Type:
N/A
Building Type:
N/A
Changout 5 ton condenser and air handler in in attic. outside: pump down and/recover system refrigerant remove old condenser and disconnect remove old condenser pad flush copper lineset level ground install new condenser pad install new disconnec
Valuation:
N/A
Permit #:
23-01769
Status:
canceled
Fee:
N/A
Permit Type:
N/A
Building Type:
N/A
. install new 5 ton york 14 seer condenser new disconnect whip and pad. install new york 80% gas furnace with evaporator coil condensate safety switch to help prevent water damaged from clogged condensate drain. hard pipe gas line out of the furnace ca
Valuation:
N/A
Permit #:
BM-22-06253
Status:
issued
Fee:
N/A
Permit Type:
N/A
Building Type:
N/A
. remove existing system and dispose of properly. flush existing copper line set. install a unistrut saddle with cable and locks if applicable. install new 5 ton york 14 seer condenser new disconnect whip and pad. install new york 80% gas furnace with e
Valuation:
N/A
Permit #:
BM-22-04959
Status:
issued
Fee:
N/A
Permit Type:
N/A
Building Type:
N/A
Remove existing system and dispose of properly. flush existing copper line set. install a unistrut saddle with cable and locks if applicable. install new 3 ton york 16 seer condenser new disconnect whip and pad. install new york 80% gas furnace with eva
Valuation:
N/A
Permit #:
BM-22-04800
Status:
issued
Fee:
N/A
Permit Type:
N/A
Building Type:
N/A
. install a unistrut saddle with cable and locks if applicable. install new 5 ton york 14 seer condenser new disconnect whip and pad. install new york 80% gas furnace with evaporator coil condensate safety switch to help prevent water damaged from clog
Valuation:
N/A
Permit #:
BM-22-04779
Status:
issued
Fee:
N/A
Permit Type:
N/A
Building Type:
N/A
Remove existing system and dispose of properly. flush existing copper line set. install a unistrut saddle with cable and locks if applicable. install new 3 ton york 16 seer condenser new disconnect whip and pad. install new york 80% gas furnace with ev
Valuation:
N/A
Permit #:
BM-22-04508
Status:
issued
Fee:
N/A
Permit Type:
N/A
Building Type:
N/A
Install 14 seer york 5 ton heatpump airhandler with 20 kw emergency heat kit, new secondary metal drain pan condensate safety switch to help prevent water damage from clogged condensate drain new honeywell t6 thermostat flush copper line set with pruge
Valuation:
N/A
Permit #:
BM-22-03308
Status:
issued
Fee:
N/A
Permit Type:
N/A
Building Type:
N/A
Install new york 3 ton straight air conditioning with 80% gas furnace and evaporator new secondary metal drain pan with condensate safety switch to help prevent water damage from clogged condensate drain install gas sidement trap. install new york 3 1/2 ton straight
Valuation:
N/A
Permit #:
BM-22-02930
Status:
issued
Fee:
N/A
Permit Type:
N/A
Building Type:
N/A
Kmp plumbing, Heating & Air Reviews
BuildZoom hasn't received any reviews for Kmp plumbing, Heating & Air. Click here to be alerted when reviews are posted about them.
Recent Buildzoom Projects
Hiring a contractor?
Verified License
BuildZoom confirmed this contractor's license
Kmp plumbing, Heating & Air License info
Verified License
| License # | AEC15973 |
| Status | Active |
| City | Plano |
| Type | Plumbing |
| Date Issued | 08-05-2025 |
- BuildZoom verified this license was active as of June 2026.
Verify this license's status for Kmp plumbing, Heating & Air at the City of Plano, Texas.
This is a sample of licensing data; click here to access a complete history.
Unverified License
| License # | AEC-4586 |
| Status | Unable To Verify |
| Town | Flower Mound |
| Type | Contractors |
- BuildZoom was not able to verify this license with the licensing board
This is a sample of licensing data; click here to access a complete history.
119
BuildZoom Score
Insured
| Insurer | Wortham Ins |
167
Permits
- Building permit records show that Kmp plumbing, Heating & Air has worked on 167 permitted projects.