Updated: Apr 10, 2026
Location and Projects
Address
1034 HWY 59 S UNIT 3, Detroit Lakes, MN, 56501
Use our bidding system to
request a quote
Laneys Mechanical Inc
Laneys Mechanical Inc, 1034 HWY 59 Hwy S, Detroit Lakes, MN (Employee: Terry T. Wendt) holds a Mechanical Contractor Bond license and 3 other licenses according to the Minnesota license board.
Their BuildZoom score of 91 ranks in the top 37% of 77,973 Minnesota licensed contractors.
Their license was verified as active when we last checked. If you are thinking of hiring Laneys Mechanical Inc, we recommend double-checking their license status with the license board and using our project planner to get competitive quotes.
Laneys Mechanical Inc Contact Information
Phone Number: (218) 847-1309
Edit
Address: 1034 HWY 59 S UNIT 3, Detroit Lakes, MN 56501
Edit
Do you work for this business? Unlock this free profile to update company info and see who's viewing your profile.
Laneys Mechanical Inc Detroit Lakes
Quality
91
63rd percentile
Pro tip:
We generally recommend hiring a contractor with a score higher than 95.
Laneys Mechanical Inc has a BuildZoom score of 91, which places them above 63% of 77,973 contractors in Minnesota.
Activity
|
2 projects
|
2026 |
|
50 projects
|
2025 |
|
42 projects
|
2024 |
|
38 projects
|
2023 |
Our building permit records indicate that Laneys Mechanical Inc has worked on at least
132.0 projects over the past 3 years.
This is an overview of this contractor's activity. Click here to access our complete licensing and building permit database.
This is an overview of this contractor's activity. Click here to access our complete licensing and building permit database.
Experience
|
10 projects
|
Home Additions |
|
7 projects
|
New Constructions |
|
96 projects
|
HVAC projects |
Analyzing permits over the last 4 years shows that Laneys Mechanical Inc mostly works on
hvac project
and home addition
projects.
Pricing
|
1 project
|
$20k-$50k |
|
2 projects
|
$100k-$250k |
Pro tip:
For more details about their pricing, check out their recent activity to see how much they have charged for different types of work.
Building Permits by Laneys Mechanical Inc
This is a sample of this contractor's permits. Click here to access their complete permit history.
Pulled 10/2 nm wire from panel to disconnect. ran an air conditioning whip from disconnect to air conditioning unit and terminate wires in unit and disconnect. max unit rating is 15 amp 2 pole landed in panel on a 15 amp 2 pole breaker. outside outlet within 25’ from air conditioning unit
Valuation:
N/A
Permit #:
ELE2506-12049
Status:
final
Fee:
$42
Permit Type:
One-family dwelling
Building Type:
N/A
Disconnect existing power to furnace and reconnect furnace power. pull new circuit for heat pump pulled 8/2 nm wire from panel to disconnect. used the existing wire for outside gfci outlet in midwest disconnect change out 2 pole breaker to a single pole 20 amp
Valuation:
N/A
Permit #:
ELE2505-09233
Status:
final
Fee:
$40
Permit Type:
One-family dwelling
Building Type:
N/A
Pull new circuit of 14/2 nm from sub panel to furnace. run in 1/2” flex for protection to a handy box with single pole toggle switch for disconnect means for furnace. land circuit under a single pole 15 amp breaker. replace air conditioning whip from existing air conditioning breaker disconnect and change out the breaker in disconnect for a two pole 30 amp. max on outdoor unit is 30 amp
Valuation:
N/A
Permit #:
ELE2505-10365
Status:
final
Fee:
$79
Permit Type:
One-family dwelling
Building Type:
N/A
Ran 10/2 nm from panel to outside disconnect. 30 amp max on air conditioning put on 30 amp two pole breaker. ran an air conditioning whip from disconnect to air conditioning. terminate disconnect at air conditioning and instead panel existing outside receptacle within 25
Valuation:
N/A
Permit #:
ELE2505-03970
Status:
final
Fee:
$42
Permit Type:
One-family dwelling
Building Type:
N/A
Pulled 10/2 nm and 12/2 nm from subpanel through basement part unfinished and part finished ceiling. removing a baseboard two pole 20 amp circuit for minisplit circuit that's a max 25 amp. pulled 10/2 for minisplit on two pole 25 amp breaker and 12/2 for outside gfci receptacle on a single pole 20 amp. mount disconnect with with gfci receptacle and ran a whip from disconnect to outdoo... see more
Valuation:
N/A
Permit #:
ELE2505-03766
Status:
final
Fee:
$48
Permit Type:
One-family dwelling
Building Type:
N/A
Disconnect existing feed for furnace and reconnect to replace furnace. disconnect air conditioning and replace whip from disconnect to heat pump. max amp rating is 35 amp existing circuit is on 30 amp. pull new low voltage control wire for heat pump
Valuation:
N/A
Permit #:
ELE2504-09716
Status:
final
Fee:
$40
Permit Type:
One-family dwelling
Building Type:
N/A
Use existing feed wire from electric range and convert it to 120v. spot 4sq box behind range and nippled from 4sq to handy box with outlet. ran #12 black white green from 4sq to outlet receptacle in handy box splice with blue wire nuts. cap off the red wire in 4sq box. change out 2 pole 40 amp range breaker to single pole 20amp gfci breaker land black(hot) wire onto breaker and cap re... see more
Valuation:
N/A
Permit #:
ELE2502-05760
Status:
final
Fee:
$38
Permit Type:
One-family dwelling
Building Type:
N/A
Disconnect power of existing circuits to furnace and air conditioning. replaced air conditioning whip from existing disconnect to air conditioning. extended power from existing furnace circuit replaced box and disconnect toggle switch of furnace
Valuation:
N/A
Permit #:
ELE2505-01645
Status:
final
Fee:
$40
Permit Type:
One-family dwelling
Building Type:
N/A
Disconnect existing power for air conditioning and furnace. reconnect existing power to air conditioning with existing air conditioning whip. change breaker out new unit max rating is 25 amp and existing is a 30 amp. reconnect existing power back to the furnace
Valuation:
N/A
Permit #:
ELE2507-05414
Status:
final
Fee:
$36
Permit Type:
One-family dwelling
Building Type:
N/A
Pulled #10/2 uf from electrical panel in garage through attic to location of minisplit. ran conduit 3/4” emt through soffit with rain tight fittings to disconnect and run uf in conduit. run tray cable #14/4 from head units to out door cable ran in line hide wire mold with refrigeration lines. sleeve cable with 1/2” nm sealight where it’s exposed. run air conditioning whip from disconn... see more
Valuation:
N/A
Permit #:
ELE2509-06600
Status:
final
Fee:
$36
Permit Type:
One-family dwelling
Building Type:
N/A
Disconnect existing furnace disconnect switch and reconnect. disconnect existing air conditioning whip and replace from existing disconnect. existing wire for air conditioning from panel is ran in #10/2 nm on the heat pump minimum ampacity is 30 amps and existing circuit is on a 30 amp two pole. pulled new thermostat wire from furnace to heat pump
Valuation:
N/A
Permit #:
ELE2509-05476
Status:
final
Fee:
$36
Permit Type:
One-family dwelling
Building Type:
N/A
Removed 2 circuits in panel of baseboard and capped wires. ran 1/2” emt on outside of house with rain tight fittings from lb conduit body of panel location to outdoor unit with disconnect from lb changed to nonmetallic sealtite to go into house and into panel. pulled #10 thhn stranded wire from panel to disconnect. landed wire on a 30 amp two pole breaker. from disconnect installed ai... see more
Valuation:
N/A
Permit #:
ELE2509-01869
Status:
final
Fee:
$36
Permit Type:
One-family dwelling
Building Type:
N/A
Remove air conditioning and used existing circuit and disconnect for minisplit. #10/2 wire used on 30 amp breaker change breaker to 25 amp breaker for max on minisplit is 25 amps replace whip from disconnect to minisplit. cap wires for air handler in panel
Valuation:
N/A
Permit #:
ELE2508-07060
Status:
final
Fee:
$36
Permit Type:
One-family dwelling
Building Type:
N/A
Disconnect reconnect existing furnace power to furnace replacement. disconnect existing air conditioning whip power and reconnect existing air conditioning whip to air conditioning replacement. change breaker for air conditioning which is on a 30 amp two pole to the new unit max of 20 amp two pole pull #14/2 nm wire for tankless water heater on 15 amp circuit from panel. cut in box an... see more
Valuation:
N/A
Permit #:
ELE2508-03453
Status:
final
Fee:
$36
Permit Type:
One-family dwelling
Building Type:
N/A
Disconnect and reconnect existing power to furnace. replace air conditioning disconnect whip from existing air conditioning disconnect to heat pump. breaker in panel for air conditioning is two pole 25 amp and heat pump max is 35 amp minimum ampacity is 22 amp
Valuation:
N/A
Permit #:
ELE2506-12711
Status:
final
Fee:
$40
Permit Type:
One-family dwelling
Building Type:
N/A
Disconnect and reconnect existing power to furnace. replace air conditioning whip from existing air conditioning disconnect. existing circuit for air conditioning is ran in 10/2 nm wire on a 30 amp two pole breaker. max on unit is40 amps minimum on 30amp so left it on the 30 amp for size of wire
Valuation:
N/A
Permit #:
ELE2507-02861
Status:
final
Fee:
$36
Permit Type:
One-family dwelling
Building Type:
N/A
Run new circuit of 14/2 nm from panel to furnace landed on a single pole 15amp breaker. install handy box and disconnect toggle switch for furnace. disconnect existing air conditioning whip and replace with new whip. breaker for existing air conditioning is on 20 amp two pole breaker and max on unit is 20 amps
Valuation:
N/A
Permit #:
ELE2507-07550
Status:
final
Fee:
$36
Permit Type:
One-family dwelling
Building Type:
N/A
Disconnect existing circuit from furnace and reconnect existing circuit to furnace. ran 10/2 uf from panel through floor joist and out where the line set for heat pump in line hide. installed new disconnect and ran new whip fro disconnect. used existing breaker for heat pump two pole 30 amp
Valuation:
N/A
Permit #:
ELE2506-07214
Status:
final
Fee:
$44
Permit Type:
One-family dwelling
Building Type:
N/A
Disconnect existing power for furnace and reconnect existing power to furnace replaced disconnect switch on furnace and box. replace air conditioning whip with a custom whip from existing disconnect ran #10 thhn stranded wire in non metallic sealtite. existing air conditioning circuit ran in #10 nm wire on a two pole 30 amp breaker max on heat pump is 35 amp minimum ampacity 22 amps l... see more
Valuation:
N/A
Permit #:
ELE2507-02029
Status:
final
Fee:
$36
Permit Type:
One-family dwelling
Building Type:
N/A
Ran 2 new circuits for air conditioning and outside gfci receptacle. pulled 12/2 nm for outside gfci receptacle and 10/2 nm for air conditioning from panel to disconnect with gfci receptacle in disconnect. max air conditioning ampacity is 25 amps. from disconnect to air conditioning installed factory made air conditioning whip. terminate in panel for air conditioning and receptacle di... see more
Valuation:
N/A
Permit #:
ELE2507-02627
Status:
final
Fee:
$36
Permit Type:
One-family dwelling
Building Type:
N/A
Similar Contractors See more
License # NAT-F191589-2
Perham, MN
105
BZ Score
$110K
Avg Project
-
Projects
License # R5635
Perham, MN
106
BZ Score
$3.8K
Avg Project
-
Projects
License # MB709036
Northfield, MN
107
BZ Score
$3K
Avg Project
-
Projects
Laneys Mechanical Inc Reviews
BuildZoom hasn't received any reviews for Laneys Mechanical Inc. Click here to be alerted when reviews are posted about them.
Recent Buildzoom Projects
Verified License
BuildZoom confirmed this contractor's license
Laneys Mechanical Inc License info
Verified License
| License # | MB003495 |
| Status | Active |
| State | Minnesota |
| Type | Mechanical Contractor Bond |
| Business Type | Not Available |
- BuildZoom verified this license was active as of March 2026.
Verify this license's status for Laneys Mechanical Inc at the Minnesota Department of Labor & Industry.
This is a sample of licensing data; click here to access a complete history.
Verified License
| License # | PC643903 |
| Status | Active |
| State | Minnesota |
| Type | Plumbing |
| Business Type | Not Available |
- BuildZoom verified this license was active as of January 2026.
Verify this license's status for Laneys Mechanical Inc at the Minnesota Department of Labor & Industry.
This is a sample of licensing data; click here to access a complete history.
Verified License
| License # | TS000361 |
| Status | Active |
| State | Minnesota |
| Type | Electrical |
| Business Type | Not Available |
- BuildZoom verified this license was active as of April 2026.
Verify this license's status for Laneys Mechanical Inc at the Minnesota Department of Labor & Industry.
This is a sample of licensing data; click here to access a complete history.
Inactive License
| License # | PM64706 |
| Status | Inactive |
| State | Minnesota |
| Type | Master Plumber |
| Business Type | Not Available |
- According to the Minnesota Department of Labor & Industry, the status of this license was at one point cancelled. However, this information may have changed. If this is your business, please update your license status.
Check this license's status for Laneys Mechanical Inc at the Minnesota Department of Labor & Industry.
This is a sample of licensing data; click here to access a complete history.
91
BuildZoom Score
539
Permits
- Building permit records show that Laneys Mechanical Inc has worked on 539 permitted projects.
Laneys Mechanical Inc Employees
TW
Terry T. Wendt