Share your project details and we'll reach out to
Pacific Construction and Manufacturing in
so you don't have to.
We'll also connect you with other vetted professionals who are a strong match for your project. That way, you can compare quotes, meet different contractors, and make the choice that feels right for you.
Pacific Construction and Manufacturing in at 2200 OAKDALE RD, Hillsborough, CA 94010, held a General Contractor license (#473777) with the California contractors license board with an expiration date of 04-25-2021. We last verified the license was inactive on 04-30-2026.
Their BuildZoom score is 0 because we haven’t been able to verify an active license. As a result, they’re not ranked in the top 50% of 336,931 California contractors.
If you’re thinking about hiring them, we recommend double-checking their license status with your local licensing authority. Alternatively, use our project planner to be easily matched to qualified, licensed professionals in your area.
Pacific Construction and Manufacturing in Services
12, 113 sf interior tenant improvement for west elm space 231. work to include the construction of new interior partition walls ceilings finishes at an existing shell space with alter/repair ducting in 1 zone 11 vav box 1 vent fan 186 light fixt 85 outlets 8 swithces 2 non residence el
5, 828 sq ft tenant improvement for sony scope of work to include the construction of non-load bearing walls ceilings new finishes with 103 light fixts 95 outlets 10 switches 1 svc to 400a 70 commercial drops 2 sub panels to 200a misc el equip 1 refrig syst <
2, 240 sf interior tenant improvement for balenciaga space 2231 with 177 fixtures 27 outlets 5 switches 1 200 amp service (2) 1 hp motors 11 communication drops 1 200 amp subpanel 1 temp. lighting dist 1 low voltage equip 2 low voltage wiring systems 1 misc. conduit for
6135 sq ft retail tenant improvement to subdivide space into two spaces. construct demising wall and modify store front door. suite 1221 (e) to be vacant not for occupancy suite 1223 new to be occupied by sony - issue c of o
Tenant improvement. for (n) retail store on ground floor & basement work includes fixtures finishes partitions mechanical & lighting. no exterior work fire protection under seperate permit
Interior tenant improvement to new retail store (8, 330 sf) exterior improvements to be submitted separately - addition mezzanine floor area (1200 sf) - revision to interior tenant improvement: additional structural columns installation to support & remove mezzanine structure (ds)
Substantial remodel and adding mezzanine for pottery barn revision 09/17/2009 revise the newly proposed structural footings due to existing footings that were discovered during the demolition process. revision 08/14/2009: revised sales floor layout, grand stair, path-of-travel addition of skylight. revision to arch struct, fire and mep. labeled delta 1. revision 11/04/09: structural r... see more
Interior tenant improvement with some demolition of (e) non-structural walls & also (e) convinience stair modification n(n) finishes millwork lighting & hvac system at ground floor level only. (e) basement 3rd. 4th. 5th. & 6th. floors to remain as is
Tenant improvement for sony existing tenant to occupy 7133 sf space including new mezzanine. includes new roof-top units and skylight replacement. **u&o sent 5/25/12**
12000-00949: plans revised to show field conditions: scope of work includes changes to partitions cosmetic changes to lighting. shop drawings of ceilings provided (for acoustical isolated ceiling)
Finish interior (3698 sf) for new restaurant (amici's). scope includes new kitchen (2) bathrooms dining area office walk-in box and pizza oven. no exteror changes. outdoor patio area (675 sf) to be on future permit
Interior 11, 606 sf store tenant improvement for restoration hardware in space 241. work to include: new ceiling partition walls finishes flooring elec/mech/plumbing
6135 sq ft retail tenant improvement to subdivide space into two spaces. construct demising wall and modify store front door. suite 1221 (e) to be vacant not for occupancy suite 1223 new to be occupied by sony - issue c of o
Proposed tenant improvement w/in space f3 building f at farmers market existing retail being improved. work includes filling in a part of the floor that was open to below on shell permit. storfront/studs to support exterior finish also part of this work. the canopy is on a separate permit. area infilled=7.5x40 (300 sf)
750 sf interior tenant improvement to create a new remote stock room for west elm. work to include the installation of new case work 6 light fixts 4 outelts 1 switch and 2 communication drops and 6 high fixed racking
Tenant improvement amici's new restaurant minor structural- 5/28/08 the correct address is 10310 not 10300 s de anza. wood tech industries pd bsl 30272 7/16/8 sent file and plans to microfilm 10/2009
Joseph cozza salon on 2nd fl. tenant improvement at reception area addition 1/2 bathroom room at private office #1 remodel (e) unisex bathroom. no exterior facade work. no exterior signage
Permit for mezzanine level in existing tenant space that is being built out at this time(see permit#01-447349 for scope). this area is intended for storage for tenant space only
Pacific Construction and Manufacturing in License info
Inactive License
License #
473777
Status
Inactive
State
California
Type
General Building
According to the California Contractors State License Board, the status of this license was at one point cancelled. However, this information may have changed. If this is your business, please update your license status.
Check this license's status for Pacific Construction and Manufacturing in at the California Contractors State License Board.
This is a sample of licensing data; click here to access a complete history.