Their BuildZoom score of 106 ranks in the top 7% of 191,428 Florida licensed contractors.
Their license was verified as active when we last checked. If you are thinking of hiring Power & Lighting Solutions Fl Corp, we recommend double-checking their license status with the license board and using our bidding system to get competitive quotes.
This scope of work includes a service change consisting of the replacement of the existing meter can with a new one the installation of a new disconnect switch and the installation of a new system ground. additionally the existing 150-amp panel located in the garage will be removed and replaced with a new 150-amp panel in the same location
This project consists of replacing the existing 400-amp electrical service with a new 400-amp service. the scope includes the installation of a new meter can a new service disconnect and a complete grounding system in accordance with the current nec and local jurisdiction requirements
Installing a new 200-amp single-gang meter pedestal to replace the existing damaged service equipment. the scope includes running approximately 100 feet of new 125-amp underground service conductors in 2-inch pvc conduit buried at a minimum depth of 36 inches (3 feet) in compliance with nec and local code requirements. the new service will be reconnected to the main utility system
Alteration - replace the existing 150-amp outdoor panel with a new 150-amp panel upgrading devices (switches outlets) and installing new interior lighting. in connection with building permit pb24-1694
The proposed work consists of replacing the existing 4-meters gang serving units 132; 135; 134 and 133 on a like-for-like basis including the replacement of the 200-amp service and the grounding system in compliance with current nec and fbc requirements
The proposed work consists of replacing the existing 4-meter gang serving units 154; 155; 169 and 168 on a like-for-like basis including the replacement of the 200-amp service and the grounding system in compliance with current nec and fbc requirements
Online permit - replace the existing pedestal containing three (3) meters with a new pedestal. the replacement will include installation of a new 200-amp service and a complete upgrade of the grounding system this pedestal currently provides electrical service to lot 109 and lot 111. in addition one of the existing meters is inactive and does not supply power to any structure; however... see more
The proposed electrical work consists of replacing the existing pedestal-mounted dual 200-amp meter can serving units 905 and 907 with a new dual meter can. the new installation will include two disconnects: one rated at 100 amps and one rated at 60 amps. in addition a new grounding system will be installed
Replacement of the existing 150-amp outdoor electrical panel with a new 200-amp panel. the scope includes upgrading the grounding system with new ground rods installing a whole-house surge protector and setting up a generator interlock kit along with a 50-amp exterior power inlet to allow safe manual connection of a future portable generator
The proposed electrical work consists of replacing the existing double 3-gang meter with a new unit serving lots a17 a18 a16 a19 a20 and a21. the replacement will include a new 200-amp service and a new grounding system on a light-for-light basis
Replacing the existing electrical service at the property by removing the current meter and installing a new 150-amp meter replacing the existing main panel with a new 150-amp panel installing a new grounding system installing a new service riser
The proposed work consists of replacing the existing 2-meter gang serving units c9 and c10 on a like-for-like basis including the replacement of the 200-amp service and the grounding system in compliance with current nec and fbc requirements
The proposed work consists of replacing the existing 4-meter gang serving units 100; 3; 2 and unit 1 on a like-for-like basis including the replacement of the 200-amp service and the grounding system. also the disconnects will be replaced
Change automatic transfer switch 200 amp generator size 26 kw conduit size schedule 80 1 1/2 main electrical serv. 200 amp conductor size #2 copper located on the west back of the house
The proposed electrical work consists of replacing the existing double 2-gang meter with a new unit serving lots k6; k7; j11;j12. the replacement will include a new 200-amp service and a new grounding system on a light-for-light basis
The proposed work consists of replacing the existing 3-meters gang serving units 34 35 and 36 on a like-for-like basis including the replacement of the 200-amp service and the grounding system in compliance with current nec requirements
Installation of an electric vehicle (ev) charger in the garage. the installation will include running #6 awg wire and connecting to a new 50-amp breaker in the existing electrical panel
The proposed work consists of replacing the existing 3-meter gang serving units 98; 4 and unit 2 on a like-for-like basis including the replacement of the 200-amp service and the grounding system. the disconnects will be replaced
Online permit - we will replace the existing 125-amp gang meter can with two meters along with two 125-amp disconnects. a new grounding system will also be installed in accordance with current code requirements. (upgrade service)
BuildZoom verified this license was active as of March 2026.
Verify this license's status for Power & Lighting Solutions Fl Corp at the Florida Department of Business & Professional Regulation.
This is a sample of licensing data; click here to access a complete history.
License Not Verified
Status
Active
State
Florida
Type
Electrical Business Information
When BuildZoom last verified this license, it had an expiration date of December, 2025. Check the current license status of Power & Lighting Solutions Fl Corp with the Florida Department of Business & Professional Regulation
This is a sample of licensing data; click here to access a complete history.