Updated: Jan 24, 2025
Location and Projects
Address
8110 175th Ave SE, Becker, MN, 55308
Use our bidding system to
request a quote
Riverroad Electric
Riverroad Electric at 8110 175th Ave SE, Becker, MN 55308, has a BuildZoom score of 90 and ranks in the top 53% of 77,973 Minnesota contractors.
If you’re thinking about hiring them, we recommend double-checking their license status with your local licensing authority. Alternatively, use our bidding system to be easily matched to qualified, licensed professionals in your area.
Riverroad Electric Contact Information
Address: 8110 175th Ave SE, Becker, MN 55308
Edit
Do you work for this business? Unlock this free profile to update company info and see who's viewing your profile.
This is a sample of this contractor's permits. Click here to access their complete permit history.
60 x 80 x18 addition for storage - put in 100 amp single phase sub panel pipe in light's receptacles switches heater outside wall packs outside receptacles 1 - exit light with heads and pipe in 2 - garage door openers. 12 circuits
Valuation:
N/A
Permit #:
ELE2404-03905
Status:
final
Fee:
$108
Permit Type:
Non-dwelling
Building Type:
N/A
The city workers hit the meter and panel plowing broke 2 - 1-1/4 pvc connectors used for nipple between meter and panel and concentric knock out broke out on 2 pvc connector on meter replaced nipple and put in reducing washers on 2 connector on meter - it's outside on 4x4 post on south east side of public works building panel is for 1 - circuit for gate. just had to screw meter back ... see more
Valuation:
N/A
Permit #:
ELE2308-08616
Status:
final
Fee:
$36
Permit Type:
Non-dwelling
Building Type:
N/A
There was 2 circuits on gfi's in basement for future receptacles so continued out and put 5 receptacles on each and owner wanted to go from single pole switch on existing lights to a 3-way system so put in a switch box on wall
Valuation:
N/A
Permit #:
ELE2301-04586
Status:
issued
Fee:
$71
Permit Type:
One-family dwelling
Building Type:
N/A
Taking out electric baseboard heat and they are putting in forced air furnace to be wired and air conditioning unit to be wired contractor took all sheet rock off walls and ceiling and put a couple new walls up there was 2 - existing bedrooms and existing bathroom that stayed and made another room a bedroom and a mechanical room for furnace and water softner and water heater (gas) rou... see more
Valuation:
N/A
Permit #:
ELE2211-10928
Status:
issued
Fee:
$71
Permit Type:
One-family dwelling
Building Type:
N/A
Relocate piranha machine approx. 15 hook up new band saw distconnect brake press and hook up new brake press in same place bring 200 amps over to second bay and hook up lazer metal cutting machine (resonator chiller dust collector main lazer table and 2 - transformers to go from 120/208 to 480 volt all supplied by lazer company 30 amp 3phase 480 volt for resonator 30 amp. for chiller ... see more
Valuation:
N/A
Permit #:
ELE2211-05811
Status:
issued
Fee:
$100
Permit Type:
Non-dwelling
Building Type:
N/A
Put a temporary service 2 posts and back board 200 amp. with meter socket and 2 gfi receptacles and 2 - gnd rods they are taking down old cabin and need some temp. power to put up building (owner)
Valuation:
N/A
Permit #:
ELE2309-05781
Status:
final
Fee:
$48
Permit Type:
One-family dwelling
Building Type:
N/A
New tenate put up steel studs for offices and work room and need to be rouhed in where he needs receptacles and boxes for computer lines relocate a few light's and put up some new light's when ceiling is done
Valuation:
N/A
Permit #:
ELE2210-01482
Status:
issued
Fee:
$71
Permit Type:
Non-dwelling
Building Type:
N/A
Rough in bedroom bathroom furnace room and part of family room all in basement 3 new circuits and 1 existing lighting circuit
Valuation:
N/A
Permit #:
ELE2401-04413
Status:
final
Fee:
$71
Permit Type:
One-family dwelling
Building Type:
N/A
Demolish light's that were there and put up boxes and light's over bar area and seating area and boxes for receptacles on walls for tv's and boxes behind and in front of bar for receptacles and a couple receptacles on wall behind bar and put switches on wall for light's and fan's all electrical piping and boxes are exposed
Valuation:
N/A
Permit #:
ELE2109-10659
Status:
final
Fee:
$79
Permit Type:
Non-dwelling
Building Type:
N/A
Putting 200 amp. meter socket on board and post by pole to eliminate meter on house meter socket has distconnect in it and ran 4/0 aluminum to house to a lb then into house to a 200 amp. panel and rehook up circuits. demolish everything on outside of house. power company needs it inspected to schedule time to hook up meter socket done and wire and ground rods done at meter house end n... see more
Valuation:
N/A
Permit #:
ELE2112-02004
Status:
final
Fee:
$176
Permit Type:
One-family dwelling
Building Type:
N/A
200 amp. by-pass meter socket 200 amp. panel board 1 - gfi receptacle switch and light inside 1 - switch and light outside 2 - gnd rods 2 - breakers
Valuation:
N/A
Permit #:
ELE2306-04976
Status:
final
Fee:
$48
Permit Type:
Non-dwelling
Building Type:
N/A
Put a 200 amp. panel and 200 amp. by-pass meter socket on shed and 2 - ground rods and a gfi receptacle under panel owner plans on insulating and tinning inside and running pipe out of panel and mounting boxes. no romex to be run
Valuation:
N/A
Permit #:
ELE2107-01527
Status:
final
Fee:
$48
Permit Type:
Non-dwelling
Building Type:
N/A
Pole shed has existing 40 amp. panel and receptacles and light's owner wanted to turn it into a shop and needed more power so put in a 200 amp. by-pass meter socket and a 200 amp. 42 circuit panel and 2 - gnd rods and a gfi under panel owner is going to frame inside and insulate and tin inside and eventually demolish old power and put circuits in new panel
Valuation:
N/A
Permit #:
ELE2010-10225
Status:
final
Fee:
$42
Permit Type:
One-family dwelling
Building Type:
N/A
Put a 200 amp. by-pass meter socket and 200 amp. panel on a pole shed put a gfi underneath panel building is insulated and waiting for service to be on then they are going to finish inside walls
Valuation:
N/A
Permit #:
ELE2009-02231
Status:
final
Fee:
$42
Permit Type:
One-family dwelling
Building Type:
N/A
Put a 200 amp. meter socket and 100 amp. panel on detached garage garage already has some power in it light's receptacles inside and out
Valuation:
N/A
Permit #:
ELE2112-02461
Status:
final
Fee:
$48
Permit Type:
Non-dwelling
Building Type:
N/A
Replace old pedestal with a new updated pedestal with a by-pass meter socket and bury new wire to power source on pole and pipe from new pedestal to panel in trailer
Valuation:
N/A
Permit #:
ELE2009-07178
Status:
final
Fee:
$71
Permit Type:
One-family dwelling
Building Type:
N/A
Hook up used paint booth with doors and make up air system outside and a exhaust fan inside and limit switches on the doors so they can't spray with doors open light's were on booth but had to wire them mount summer/winter stat on booth with a override stat on wall and mount motor drive on wall and distconnect's and switches for light's and control circuit on booth
Valuation:
N/A
Permit #:
ELE2106-05877
Status:
final
Fee:
$36
Permit Type:
Non-dwelling
Building Type:
N/A
Excel needs permit to put in meter in existing meter socket
Valuation:
N/A
Permit #:
ELE2209-03157
Status:
issued
Fee:
$36
Permit Type:
One-family dwelling
Building Type:
N/A
Similar Contractors See more
156
BZ Score
$5K
Avg Project
-
Projects
132
BZ Score
$9.3K
Avg Project
-
Projects
133
BZ Score
$13.1K
Avg Project
-
Projects
Riverroad Electric Reviews
BuildZoom hasn't received any reviews for Riverroad Electric. Click here to be alerted when reviews are posted about them.
Recent Buildzoom Projects
Let us find you an electrician in your area today
We'll search our vast network of Electricians and connect
you with one that meets your needs today.
Riverroad Electric License info
License Not Required
| Status | Not Required |
- BuildZoom verified in November, 2023 that this contractor does not need a license to be a electrician in Minnesota.
This is a sample of licensing data; click here to access a complete history.
90
BuildZoom Score
17
Permits
- Building permit records show that Riverroad Electric has worked on 17 permitted projects.