Simplex Grinnell

Remove in-duct detector in conjunction with removal of existing fire smoke damper. no other changes to the fire alarm system to be made this permit is attached to bld22-03445 the scope of work will only involve the physical removal of the in-duct detector and fire smoke damper plus the points from the programming side. no plan review report provided. trevor reed 2/3/23

Fire alarm sprinkler monitoring system in an existing building. new system shall consist of: * an addressable fire alarm panel with an external cellular communicator. * a remote ann-80 annunciator shall be installed at the front entrance. * existing exterior bell to be installed outside above fdc. * smoke detection above the panel. * manual pull station next to the facp. * monitor mod... see more

Grove hotel annunicator relocation and heat detector addition - the scope of work for this project is to relocate the existing annunciator panel located at the 1st floor reception area & replace the (3) smoke detectors at the 2nd floor kitchen with heat detectors all other existing fire alarm equipment is to remain as-is. this work does not appear to be associated with a building permit

Modify existing fire alarm system: replace existing smoke detector with a new heat detector in guest kitchen area due to numerous false alarms caused by hotel guests. this permit is not attached to a building permit no plan review report provided

Provide and install a new automatic and manual ansul sapphire (novec-1230) fire suppression system for class a hazard main system - art vault collections book vault and temporary collections main and reserve system - gersmann collections

Demolish part of wet system and install a new single interlock preaction system in an archives area and rebuild the existing riser with a new 4 preaction valve in an existing building that shall comply with nfpa 13 2019 edition

Sow 4010 simplex fire alarm system in an existing building. panel needs to be replaced. included : * an addressable 4010 simplex fire alarm panel * new cell communicator * test time * inspection time with ahj *

Update sequence of operations for elevator recall. currently all initiating devices on the 1st floor initiate alternate recall and all upper floor devices initiate primary recall. soo is being update so that only the code required detectors initial recall. this permit is not attached to a building permit and no plan review report provided

The scope of work for this project is to complete phase 1 of the south tower fire alarm system upgrade at st. alphonsus regional medical center. this includes 2 new transponders located at 4th & 6th floors. they will be networked with existing node 6 located on the 3rd floor of the south tower. all new initiating & notification devices shall be installed as indicated on plans phasing ... see more

Modify existing fire alarm system: replace the existing 4020 facp with a new 4100es facp. all elevator & sprinkler interface controls will be replaced & the building will be brought up to code where needed. provide new devices relocate and demolish existing devices as shown on drawings

Modify existing alarm system. demolish and relocate existing devices provide new devices as shown on drawings. coverage areas for the visible notification devices were pulled from nfpa 72 2019 18.5.5.5.1 (a) and (b) and the ifc and nfpa 72 sound requirements will apply. this permit is attached to bld22-00566

Provide new devices relocate and demolish existing devices as shown on drawings. the scope of work consists of the lunatic fringe tenant improvement located on the 1st floor of bodo 4. this permit is attached to bld21-04184 and there are no new alarm initiating devices. notification has been provided for full coverage no plan review report provided. this b occupancy has a occupant loa... see more

Addition of four duct detectors for new ahu201(located on roof above the 2nd floor mechanical mezzanine.) which is a backup air-handler for ahu3 & ahu4. this permit is associated with bld20-01274 there are a total of 4 new duct detectors with remote test switches and will include a shutdown function

Install new annunciator in 1st floor fire command center for voice command system. install new 4100es panel at the 3rd floor south tower and modify existing fire alarm system. provide new devices and demolish existing devices as shown on drawings. this permit is attached to bld21-03415 and there are a total of 158 alarm initiating devices and includes notification and a voice evac sys... see more

Provide and install a new 4007es fire alarm panel to take over the sprinkler monitoring of this building in place of the existing vista 100 panel. as-built now show the tampers for the anitfreeze loop on the drawings and the dact has been updated to show the battery back up also battery calcs have been updated

This is a temporary install in order for the 2 separate fire alarm panels to communicate and send condition of panel to each other. the (3) 4090-9002 riam’s will send an output signal to the potter panel to read alarm supervisory & trouble of the simplex facp & the (3) 4090-9001 iam’s will monitor the alarm supervisory & trouble signals of the potter facp

Modify existing fire alarm system: provide new av devices demolish existing devices per drawings. plan mod submitted on 1/18/22 this now will include in the scope of work the whole tenant space for notification devices being changed out. this permit is attached to 2 building permits bld21-04257 and bld21-02281 due to this being constructed in 2 phases. total of 23 notification devices... see more

Modify existing fire alarm system: provide new devices relocate and demolish existing devices as shown on drawings. as-builts due to sync issues new layout is good for visible coverage and smoke coverage per plans

Modify existing fire alarm system for remodel. this will include 2 new notification devices for the scope of work area referenced in the attached bld23-00786 no plan review report provided( quick permit)

Scope of work for this project is the demolition of the fire alarm devices on the south tower 3rd floor: existing transponder & nac panel to remain relocate and demolish existing devices as shown on drawings