South Coast Commerical Electric Inc, 16735 Saticoy St, Van Nuys, CA (Employees: Alessandro Fidel Diaz, Danil Dyachkov, and Danil Dyachkov) holds a Electrical, General Building license according to the California license board.
Their BuildZoom score of 109 ranks in the top 5% of 336,931 California licensed contractors.
Their license was verified as active when we last checked. If you are thinking of hiring South Coast Commerical Electric Inc, we recommend double-checking their license status with the license board and using our project planner to get competitive quotes.
[eplan] roof mounted solar pv1 system with 22 modules/microinverters 1 combiner 1 sub panel. system rated 10.0kw dc 7.7kw air conditioning. existing photovoltaic system is present. ***mpu to be under separate permit.***
[eplan] install 9.9kw dc/7.6 kw air conditioning roof mount solar system include 22 x 450w module with ts4 optimizers 7.6kw canadian solar inverter & 9.9 kwh ep cube battery system
[pv2] $0 fee per ab-1414. pc for installation of roof mounted solar panels. scope of work includes 525 modules with 263 optimizer 2 central inverter system and 1 panelboard connected to existing main distribution switchboard. system size is 205.55kw dc/166.66kw air conditioning
$0 final fee per ab1414 eplan. pv2 roof mounted solar. scope of work includes 99 modules (420w) 99 power optimizers s440 3 centeral inverters (se10000h-us) 225a load center and existing service. system size: 41.6kw dc 30.0kw air conditioning
Eplan. pv2 roof mounted solar. scope of work includes 99 modules (420w) 99 power optimizers s440 3 centeral inverters (se10000h-us) 200a load center and existing service. system size: 41.6kw dc 30.0kw air conditioning
Delta 1 changes to an approved set of plan changes include revied photovoltaic module on the roof relocate equipment location. plan check only - permit #19041-20000-52437
Plan check only for revision to approved set under delta 1. scope of work includes changes to single line diagram. ***original work description*** pv3. install 239.2 kw roof mounted photovoltaic system. (598) modules with (2) 33.3 kw and (6) 20 kw rated inverters. permit fees $0.00 due to california senate bill 1222 and ab 1414
Expedited fees [eplan] pv2 install new roof mounted photovoltaic solar system using (99) modules with power optimizers and (3) central inverters interconnected to the line side of a (e) 600amp service. total system size is 41.58 kw dc/30 kwac
[eplan] pv2 install new roof mounted photovoltaic solar system using (99) modules with power optimizers and (3) central inverters interconnected to the line side of a (e) 600amp service. total system size is 41.58 kw dc/30 kwac
Commercial photovoltaic plan check for a lost set of plans. system size is 239.2 kw dc (186.6 kw ac). plan check only - permit #19041-20000-52437 *** original: pv3. install 239.2 kw roof mounted photovoltaic system. (598) modules with (2) 33.3 kw and (6) 20 kw rated inverters. permit fees $0.00 due to california senate bill 1222 and ab 1414
(eplan) pv2 pc for installation of roof mounted solar panels. photovoltaic system includes 202 modules with 202 rapid shutdown 1 central inverter system 1 solarpanel board and 1 75kva transformer connected to existing main service panel. system size 84.84kw dc/60kw air conditioning
(eplan) pv2 pc for installation of roof mounted solar panels. photovoltaic system includes 198 modules with 198 rapid shutdown 1 central inverter system 1 solarpanel board and 1 75kva transformer connected to existing main service panel. system size 60kw air conditioning
Reroof with 31 sqrs comparable shingle roofing. existing solid sheathing. re-roof with class a or b material weighing less than 6 pounds per sq. ft. for residential roof replacement > 50% of the total roof area apply cool roof product labeled and certified by cool roof rating council (crrc). cool roof may be required for non-residential buildings per title 24 part 6 section 149(b)
Reroof with 42 sqrs comparable shingle roofing. existing solid sheathing. re-roof with class a or b material weighing less than 6 pounds per sq. ft. for residential roof replacement > 50% of the total roof area apply cool roof product labeled and certified by cool roof rating council (crrc). cool roof may be required for non-residential buildings per title 24 part 6 section 149(b)
Reroof with 31 sqrs comparable shingle roofing. existing solid sheathing. re-roof with class a or b material weighing less than 6 pounds per sq. ft. for residential roof replacement > 50% of the total roof area apply cool roof product labeled and certified by cool roof rating council (crrc). cool roof may be required for non-residential buildings per title 24 part 6 section 149(b)
Reroof with 16 sqrs built up roofing. existing solid sheathing. re-roof with class a or b material weighing less than 6 pounds per sq. ft. for residential roof replacement > 50% of the total roof area apply cool roof product labeled and certified by cool roof rating council (crrc). cool roof may be required for non-residential buildings per title 24 part 6 section 149(b)
Reroof with 13 sqrs built up roofing. existing solid sheathing. re-roof with class a or b material weighing less than 6 pounds per sq. ft. for residential roof replacement > 50% of the total roof area apply cool roof product labeled and certified by cool roof rating council (crrc). cool roof may be required for non-residential buildings per title 24 part 6 section 149(b)