Updated: Apr 03, 2026
Location and Projects
Address
131 Mckenney Ln, Centreville, MD, 21617
Use our bidding system to
request a quote
Thomas Gerard Weisman Electrician
Thomas Gerard Weisman, 131 Mckenney Ln, Centreville, MD (Owned by: Joseph Weisman) holds a Electricians license and 5 other licenses according to the Maryland license board.
Their BuildZoom score of 109 ranks in the top 5% of 58,058 Maryland licensed contractors.
Their license was verified as active when we last checked. If you are thinking of hiring Thomas Gerard Weisman, we recommend double-checking their license status with the license board and using our project planner to get competitive quotes.
Thomas Gerard Weisman Contact Information
Phone Number: (410) 266-3522
Address: 131 Mckenney Ln, Centreville, MD 21617
Thomas Gerard Weisman Centreville
Quality
109
95th percentile
Pro tip:
We generally recommend hiring a contractor with a score higher than 95.
Thomas Gerard Weisman has a BuildZoom score of 109, which places them above 95% of 58,058 contractors in Maryland.
Activity
|
42 projects
|
2025 |
|
31 projects
|
2024 |
|
62 projects
|
2023 |
Our building permit records indicate that Thomas Gerard Weisman has worked on at least
135.0 projects over the past 3 years.
This is an overview of this contractor's activity. Click here to access our complete licensing and building permit database.
This is an overview of this contractor's activity. Click here to access our complete licensing and building permit database.
Experience
|
24 projects
|
Commercial Renovations |
|
9 projects
|
New Constructions |
|
131 projects
|
Electrical projects |
Analyzing permits over the last 4 years shows that Thomas Gerard Weisman mostly works on
electrical project
and commercial renovation
projects.
Pricing
Pro tip:
For more details about their pricing, check out their recent activity to see how much they have charged for different types of work.
Building Permits by Thomas Gerard Weisman
This is a sample of this contractor's permits. Click here to access their complete permit history.
200 amp service: • demo/remove the existing 100 amp service. • furnish and install (1) 200 amp service panel breakers surge protector and exterior disconnect. • furnish and install new line and load side service cable and sleeve where needed due to existing walkable roof and windows. • furnish and install new cold-water ground (2) ground rods and hcg jumper • furnish and install (1) 3... see more
Valuation:
N/A
Permit #:
E02414696
Status:
filed
Fee:
$190
Permit Type:
N/A
Building Type:
N/A
Customer is adding hvac systems to house. we are upgrading electrical service from 200-400 amps. meter is under ground and located on front right corner of garage/house we will addition 200-amp 30 circuit panel to garage and run new circuits from this panel new hp unit will be installed by chimney. 20 amps 240 volt. we will reuse the 30-amp circuit going to hvac unit in basement. base... see more
Valuation:
N/A
Permit #:
E02413936
Status:
complete
Fee:
$302
Permit Type:
N/A
Building Type:
N/A
Install electrical for the following signs on permit sign-240139 for comm-240116 -sprouts 60 led illuminated letters (front elevation) -farmers market 25 led illuminated letters (front elevation -sprouts 54 led illumintated letters (south elevation) -farmers market led illuminated letters (south elevation) -organic & fresh 2'10 led illuminated panels (front elevation)
Valuation:
N/A
Permit #:
ELEC-250710
Status:
complete
Fee:
N/A
Permit Type:
N/A
Building Type:
N/A
We propose to furnish labor and material to: • furnish and install 14/3 romex from the existing smoke detector in the finished basement to the finished garage by way of cutting and fishing in the line. • furnish and install (1) round old work box in the garage ceiling and hardwire the customers kiddie heat detector. • circuit is on an existing 15-amp leviton breaker
Valuation:
N/A
Permit #:
E02413488
Status:
complete
Fee:
$190
Permit Type:
N/A
Building Type:
N/A
Furnish and install (1) 100 amp 240 volt feed from the home to the detached garage approximately 150. • run from the existing 200 amp ch panel in the home to the crawl space approximately 50 and install #2 ser and set junction on the exterior and change over to pvc. • trench from the crawl space approximately 40 bore/punch under the 9 driveway trench and additional 15 to the garage an... see more
Valuation:
N/A
Permit #:
E02413483
Status:
complete
Fee:
$190
Permit Type:
N/A
Building Type:
N/A
• demo/remove the existing 200-amp panel (2) below outlets and the verizon box to be strung from the joist. • furnish and install (1) 200-amp main breaker 42 circuit homeline panel all new breakers and (1) surge protector. • relocate 2 to the left of the existing location on the new stud wall being built due to the age of the existing wall that is existing. • furnish and install (4) 1... see more
Valuation:
N/A
Permit #:
E02418615
Status:
complete
Fee:
$190
Permit Type:
N/A
Building Type:
N/A
We propose to furnish all labor and material necessary to supply and install a 24 kw generac generator equipment for a complete turn-key stand-by generator system • (1) generac 24kw stand-by lp gas generator. (10) year bumper to bumper warranty. • (1) generac 200-amp automatic transfer switch
Valuation:
N/A
Permit #:
E02418221
Status:
complete
Fee:
$190
Permit Type:
N/A
Building Type:
N/A
Furnish and install electrical per scope of work below for garage/screened in porch (1) 125-amp 120/240 volt 1 phase garage sub panel located on inside wall on right side closest to screened in porch. feeder will be run in conduit from left corner of house to panel in garage. ser cable will be run from this location inside the house through the basement bulkhead and into the new 200-a... see more
Valuation:
N/A
Permit #:
E02417923
Status:
filed
Fee:
$190
Permit Type:
N/A
Building Type:
N/A
Mini split circuit: • furnish and install (1) 20 amp 240 volt circuit from the 200 amp service in pantry to the new mini split location up to 50 and run in the crawl space. • furnish and install (1) disconnect at the unit and (1) 220 amp breaker at the panel. • furnish and install (1) 12/2 uf tail for the unit
Valuation:
N/A
Permit #:
E02417028
Status:
complete
Fee:
$138
Permit Type:
N/A
Building Type:
N/A
Scope of work ev charger: • furnish and install (1) 50 amp 240 volt circuit for the customers tesla charger and hardwire in the garage • feed by way of existing 400 amp sdqo service in the garage with space • furnish and install up to 30 of 3/4 pvc from the panel to the charger location between the interior bay doors of the garage
Valuation:
N/A
Permit #:
E02416222
Status:
complete
Fee:
$138
Permit Type:
N/A
Building Type:
N/A
Garage/loft we propose to furnish labor and material to: lighting • weisman electric to provide (24) led recess lights (6) shop lights (1) double flood and led dimmers where applicable • customer to provide all other lighting fans and appliances kitchen • 4 countertop outlets to code and (2) gfi circuits • wire for the dw gd wall oven cook top micro hood and fridge bathroom • furnish ... see more
Valuation:
N/A
Permit #:
E02408792
Status:
complete
Fee:
$138
Permit Type:
N/A
Building Type:
N/A
• heavy up the electrical service to 200-amp from 100-amp for overhead service and ge panel • furnish and install (1) mast kit and through bolt into the closet. • furnish and install new line and load side service cable (1) disconnect • furnish and install new grounding and reuse the existing well ground • furnish and install (1) new 200-amp panel/cover surge protector and breakers • ... see more
Valuation:
N/A
Permit #:
E02408788
Status:
complete
Fee:
$190
Permit Type:
N/A
Building Type:
N/A
Scope of work we propose to furnish labor and material to: • install new 50-amp nema 3r sub panel for new pier. existing conduit and feeders to remain and be reused. we assume that the circuit is in good condition but there is no way to know until the panel is hooked up and load is applied. we will test conductors before we apply voltage to ensure no ground faults exist • install new ... see more
Valuation:
N/A
Permit #:
E02406619
Status:
complete
Fee:
$80
Permit Type:
N/A
Building Type:
N/A
We propose to furnish all labor and material necessary to supply and install a 12kw briggs and stratton fortress generator equipment for a complete turn-key stand-by generator system • (1) briggs and stratton fortress 12kw stand-by ng gas generator • (1) briggs and stratton 100 amp 16 circuit select automatic transfer switch
Valuation:
N/A
Permit #:
E02406272
Status:
expired
Fee:
$110
Permit Type:
N/A
Building Type:
N/A
Install 12kw stand-by ng gas generator 200 amp automatic transfer switch
Valuation:
N/A
Permit #:
E02406184
Status:
expired
Fee:
$110
Permit Type:
N/A
Building Type:
N/A
We propose to furnish labor and material to install: • heavy up the electrical service to 200-amp for overhead service. upgrade cold water ground and addition ground rods per nec code • furnish and install (1) 200-amp briggs and stratton symphony transfer switch on exterior of home next to electric meter. we will install this at time-of-service upgrade for future generator system
Valuation:
N/A
Permit #:
E02403051
Status:
filed
Fee:
$110
Permit Type:
N/A
Building Type:
N/A
We propose to furnish all labor and material necessary to supply and install a 20kw briggs and stratton power protect dx generator equipment for a complete turn-key stand-by generator system • (1) briggs and stratton power protect dx 20kw stand-by ng gas generator. (10) year bumper to bumper warranty. • (1) briggs and stratton 200-amp automatic transfer switch
Valuation:
N/A
Permit #:
E02402955
Status:
complete
Fee:
$110
Permit Type:
N/A
Building Type:
N/A
We propose to furnish all labor and material necessary to supply and install a 20kw briggs and stratton power protect dx generator equipment for a complete turn-key stand-by generator system • (1) briggs and stratton power protect dx 20kw stand-by lp gas generator. (10) year bumper to bumper warranty. • (1) briggs and stratton 200- amp automatic transfer switch
Valuation:
N/A
Permit #:
E02402953
Status:
filed
Fee:
$110
Permit Type:
N/A
Building Type:
N/A
We propose to furnish all labor and material necessary to supply and install a 20kw briggs and stratton power protect dx generator equipment for a complete turn-key stand-by generator system • (1) briggs and stratton power protect dx 20kw stand-by lp gas generator. (10) year bumper to bumper warranty. • (1) briggs and stratton 200-amp automatic transfer switch
Valuation:
N/A
Permit #:
E02402937
Status:
filed
Fee:
$110
Permit Type:
N/A
Building Type:
N/A
• heavy up the electrical service from 200 to 400-amp for new underground service • install (2) owner supplied sqd 200-amp mcb panels in basement in place of subpanel and main panel. • install (1) 4” pvc conduit with 36” sweeping 90’s at both ends (1) at bge pole and (1) at front right corner of house for bge underground service cable to be pulled in and supplied by bge. bge designer ... see more
Valuation:
N/A
Permit #:
E02401544
Status:
complete
Fee:
$405
Permit Type:
N/A
Building Type:
N/A
Thomas Gerard Weisman Reviews
BuildZoom hasn't received any reviews for Thomas Gerard Weisman. Click here to be alerted when reviews are posted about them.
Recent Buildzoom Projects
Verified License
BuildZoom confirmed this contractor's license
Thomas Gerard Weisman License info
Verified License
| License # | 12052 |
| Status | Active |
| State | Maryland |
| Type | Electricians |
- BuildZoom verified this license was active as of April 2026.
Verify this license's status for Thomas Gerard Weisman at the Maryland Department of Labor, Licensing & Regulation.
This is a sample of licensing data; click here to access a complete history.
License Not Verified
| License # | 1635 |
| Status | Active |
| City | Annapolis |
| Type | Electrical Cont, Master |
- When BuildZoom last verified this license, it had an expiration date of August, 2017. Check the current license status of Thomas Gerard Weisman with the The City of Annapolis, MD
This is a sample of licensing data; click here to access a complete history.
License Not Verified
| License # | PA118913 |
| Status | Active |
| State | Pennsylvania |
| Type | Electrical Contractor Generator Installation |
- When BuildZoom last verified this license, it had an expiration date of August, 2017. Check the current license status of Thomas Gerard Weisman with the Pennsylvania Office of the Attorney General
This is a sample of licensing data; click here to access a complete history.
Inactive License
| Status | Inactive |
| State | Maryland |
| Type | Electricians |
- According to the Maryland Department of Labor, Licensing & Regulation, the status of this license was at one point cancelled. However, this information may have changed.
Check this license's status for Thomas Gerard Weisman at the Maryland Department of Labor, Licensing & Regulation.
This is a sample of licensing data; click here to access a complete history.
Inactive License
| License # | E0005 |
| Status | Inactive |
| City | Annapolis |
| Type | Electrical Cont |
- According to the The City of Annapolis, MD, the status of this license was at one point cancelled. However, this information may have changed.
Check this license's status for Thomas Gerard Weisman at the The City of Annapolis, MD.
This is a sample of licensing data; click here to access a complete history.
Inactive License
| License # | CON-1635 |
| Status | Inactive |
| City | Annapolis |
| Type | Electrical Cont |
- According to the The City of Annapolis, MD, the status of this license was at one point cancelled. However, this information may have changed.
Check this license's status for Thomas Gerard Weisman at the The City of Annapolis, MD.
This is a sample of licensing data; click here to access a complete history.
109
BuildZoom Score
Insured
| Insurer | Atlantic States |
1.7K
Permits
- Building permit records show that Thomas Gerard Weisman has worked on 1661 permitted projects.
Thomas Gerard Weisman Employees
CW
Casey T. Weisman
Owner
CW
Casey Weisman
Vice President
JW
Joseph Weisman
Owner
TW
Thomas Gerard Weisman
Owner