Share your project details and we'll reach out to
TOWER 39 GENERAL CONSTRUCTION
so you don't have to.
We'll also connect you with other vetted professionals who are a strong match for your project. That way, you can compare quotes, meet different contractors, and make the choice that feels right for you.
TOWER 39 GENERAL CONSTRUCTION at 11930 Hobday Rd, Wilton, CA 95693, held a General Contractor license (#995582) with the California contractors license board with an expiration date of 08-31-2026. We last verified the license was suspended on 05-27-2026.
Their BuildZoom score is 0 because we haven’t been able to verify an active license. As a result, they’re not ranked in the top 50% of 336,931 California contractors.
If you’re thinking about hiring them, we recommend double-checking their license status with your local licensing authority. Alternatively, use our project planner to be easily matched to qualified, licensed professionals in your area.
Building new 6581 sf home on undeveloped lot in ranch murietta ca. includes: fire sprinklers propane gas system hvac electrical (new service) plumbing (well and septic) and site work. related ground mount solar on cbnr2024-00047 on shared plans in cbnr2023-01117
Epc - dish wireless is proposing to collocate at 80 rad on existing smud communications tower: (3) antennas (6) rrus and other ancillary equipment. dish also proposing to install (1) cabinet utilities and other ground equipment within a new 5'x7 ground space inside of the existing fenced compound (see building permit)
Valuation:
$50,000
Permit #:
COM-2209356
Status:
final
Fee:
$2,167
Permit Type:
N/A
Building Type:
N/A
New buildings or additions commercial coaches ground mount solar pole light standards
Dish wireless is proposing to install (3) antennas (6) rrus (1) ovp and (1) hybrid fiber line within the new lease space of 5’x7’ and 3'x5 concrete pad for ground equipment which includes (1) cabinet. dish will be collocating on existing wireless telecommunications tower and installing new equipment at 62’ rad height
Dish is proposing to install (3) panel antennas (6) rrus (1) dc surge suppressor and (1) hybrid fiber line on the tower. on the ground within the fenced compound this facility will locate an equipment cabinet on a new 5 x 7 concrete pad
Install a 30 kw diesel powered stand-by generator with a 190 gallon belly tank on a new 4'x10 concrete pad. run underground utility connections between the new generator and the existing equipment. installation will be within the existing 35'x26.5 fenced compound area
Valuation:
$30,000
Permit #:
20CP01976
Status:
expired
Fee:
$1,339
Permit Type:
N/A
Building Type:
N/A
Commercial: full review - new structures tenant improvements and accessories
Dish wireless will be performing a first time installation on an existing cell site. they will be installing 3 new antennas and 6 rru on the tower while adding new ground equipment on a new 5 x 7 cement pad
Epc - the proposal is for dish wireless co-location at an existing wireless telecommunication facility consisting of the following: tower work: increase tower height from 75 to 85 and install (3) t-arms (3) panel antennas (6) rru's (1) ovp and (1) hybrid cable ground work: install (1) concrete pad (1) ice bridge (1) ppc cabinet (1) equipment cabinet (1) power conduit (1) telco conduit... see more
Existing at&t cell site. install a new 30kw diesel powered stand-by generator with 190 gallon belly tank on a new 4'x10 concrete pad within a 5'x20 compound expansion. install chain link fencing around the compound expansion and connect the generator to the existing equipment
Install a 10 x 4 concrete pad in a new 10 x 22 in a new 10 x 22 fenced compound expansion; install a generac sd030 30kw generator with 190 gallon subbase diesel fuel tank; install a new h-frame with new automatic transfer switch camlock and fire extinguisher; trench an underground conduit within the lease area for utilty connections
The installation of the generac emergency backup generator includes digging and pouring a 10'x4 concrete pad foundation and trenching an underground conduit. all work will be performed within the existing fenced compound. there will be no changes to the tower or tower-mounted equipment
At&t - las airport. installation of an emergency backup generator at an existing at&t wireless facility. there will be no antenna/equipment changes no frequency changes no tower work no expansion of the footprint. all work for the generator installation will be completed within the existing fenced compound. the generator will only be activated during power outages and for periodic mai... see more
Valuation:
N/A
Permit #:
B20-09946
Status:
final
Fee:
$1,629
Permit Type:
N/A
Building Type:
N/A
New buildings or additions commercial coaches ground mount solar pole light standards
Modify the existing cell tower to addition new 5g technology. modification involves adding new attenenas and radio with associated cabling and coax. crown castle wireless cell tower
Valuation:
$15,000
Permit #:
CBNC2022-00263
Status:
complete
Fee:
$801
Permit Type:
Misc. Structure w...
Building Type:
N/A
Tenant improvement alteration apartment/condo kitchen-bath remodel electric vehicle charger
Eligible facilities request collocation of antennas ancillary equipment and ground equipment as per plans for a new carrier on an existing wireless communication facility
Install emergency standby generator adjacent to existing at&t wireless facility in new 8 fenced area. proposed 30kw (48.8 hp) generator with 190-gallon subbase diesel fuel tank automatic transfer switch. the generator will only be activated during power outages and for periodic maintenance
Co-locate a new at&t cell site in a 13'11"x9'2 lease area on an existing tower per plans and calc's: 1) new electric service & telco/fiber cable to site. 2) new equip. cabinet on a 8'x8 concrete pad. 3) 2 gps units 12 antennas 12 rru's 3 surge suppressors etc. 4) install a generac sd030 2.4l 30kw diesel generator on a 8'x4 concrete pad. 5) install h-frame ciena telco can ice bridge
Epc submittal - remove and reset existing battery cabinet at ground. remove skid at ground. remove existing cabinet at ground. remove (3) 8 panel antennas from tower. install (3) new 8 panel antennas (3) tta/tma (3) radio 4449 and (1) 6x12 hcs cable on tower. install (1) rbs 6102 cabinet at ground. upgrade existing bts from 60 to 150 amp. remove and replace conductor to bts
Valuation:
$30,000
Permit #:
COM-1818960
Status:
final
Fee:
$1,885
Permit Type:
N/A
Building Type:
N/A
Tenant improvements alterations kitchen/bath remodels for apartments or condos electric vehicle char
The proposed scope of work is for removal of (3) antennas (3) rru's and (6) tma/tta from existing tower and installation of (3) new panel antennas (3) new radio units and (1) 6x12 hcs cable on tower. install (1) delta battery cabinet at ground equipment area. edr file
According to the California Contractors State License Board, the status of this license was at one point cancelled. However, this information may have changed.
Check this license's status for TOWER 39 GENERAL CONSTRUCTION at the California Contractors State License Board.
This is a sample of licensing data; click here to access a complete history.