The 10 Best Carpenters in San Francisco, CA

IMPORTANT: please watch https://www.youtube.com/watch?v=YPWfg6rj3Og for a virtual walkthrough! The below notes are generated based on that. This project involves the potential replacement of 5 to 11 windows on the second floor of a condo unit. The primary focus is on replacing 5 older, single-pane, single-hung, wooden sash windows that are in rough condition and poorly insulated. Quotes are definitely requested for these five windows, with the option to include an additional two windows (in better condition) and three small bathroom windows (optional). The goal is to upgrade to better-insulated, likely vinyl, double-pane windows. Note that some existing windows in the unit have already been replaced with vinyl. If you're interested, please reach out. Window Details and Dimensions ...

Backyard elevated (2-3 stories) deck needs repair on boards that are popping up due to deteriorated screws/nails or cracked due to weathering. Some rail and stair work as well. Re-painting afterward also if possible. If you are interested in this project, please reach out. Thank you!

I'm in the process of closing in on a house for my mom. I'd like to have a new mailbox built before she moves in. I'm just wondering if this is something you can do and if you're available to provide a quote. If interested, please contact me. Thanks!

Replace 6 windows and 1 patio door that have dry rot with vinyl or fiberglass. Please reach out if you can help. Thank you.

I’m looking for a licensed exterior finish carpenter or woodworking contractor to design and build two custom exterior access doors or panels at my San Francisco home. The first opening provides access to the hot-tub pumps, plumbing, and electrical components. The area is currently enclosed by a fence-like wood structure that is nailed in place. I would like either: • The existing structure modified to include a functional access door, or • The enclosure rebuilt as a separate removable section that can slide or lift up and out when service access is needed, rather than being permanently nailed down The second opening is near the front porch and provides access to gas and water lines. It currently has a wood access panel, but the wood has deteriorated due to water intrusion. There is ...

This project is to build a non-load bearing wall and door to divide a kitchen from a hallway. Here are the parameters: Ceiling height: 100″ Wall/s length: 78.5″ Wall shape: straight wall Sound insulation: standard insulation Door size : 30″ x 80″ standard Door style: standard wood door You would be expected to create the plans; we could pull up previous permits to try to find and modify the previous plans. Form 3/8 sample answers: Building Use: 28 - 2 FAMILY DWELLING Block/Lot: 3609/058 Address: 366 LEXINGTON ST Description of Work: "Install new non-bearing partition wall (78.5" length x 100" height) with 30" x 80" door to separate kitchen from hallway. Wall to include standard sound insulation and standard wood door." Occupancy Class: R-3 For questions 10-24 on the form: Que...

You were recommended to me on Nextdoor! We just purchased a home and are reaching out to see if this is a project your team can take on. The deck is completely dry rotted and needs to be fully rebuilt. Since we’re in a planned community with an HOA, we’ll need to work with a licensed contractor and go through the proper permitting process. Let me know what you think, and if you’re able to provide a rough estimate or would prefer to come out and take a look first. I've attached the section of the inspection report that is about the deck. If you are interested in this project, please reach out. Thank you!

We have a few small carpentry jobs around the house: - Need a few stair treads replaced on exterior staircase - Need to assess & potentially replace the stair landing on exterior staircase - Have a few interior projects (wood valance for covering curtain rods) - Have a potential project in mind to update and/or replace part of an interior bannister All of these projects require woodworking/carpentry and eventually painting (we have a painter but are not obligated to use them). Please contact me if you're interested. Thanks!

I have 10 decks that need to be stripped and cleaned and then resurfaced with a slip-resistant seal. Two of the decks have to be slightly re-sloped away from the sliding glass door toward the drain. The decks are 18.5 feet by 6 feet. Midtown is owned by the city, and the job will have to be prevailing wage. I can meet contractors next week to give them a tour and look at the decks. Midtown is a 140-unit residential project. Email is better. Please do not text me. Please reach out if you can help. Thank you.

We’re looking for bids to build a roof deck, including windshields and a BBQ area, on our building. The project includes design, permits, and construction. Experience with rooftop work on multi-unit buildings is preferred. Please reach out if you can help. Thank you.