In the Midwest, it averages 14 to 20 dollars per square ft.
The range can be between $7 and $16 per s.f. depending on pattern, stains, dyes and sealers selected.
Depending on how many square feet you are having poured, the price range is $8-$20. The higher the square footage, the lower the price. Steps, thickened edge, stamp pattern, and accessibility all affect the price per sq ft.
In the East Coast, Stamped Concrete comes around $8-$20. Price depends on the area, if it is busy or metropolitan, or even the depth of the concrete, plus the factors of:
- Site Preparation
- Control Joints/Expansion Joints
- Cleanup
- Removal of Concrete
- Materials (Rebar/Mash, Concrete,etc)
It will depend on location and project specifics but in WA State $10/SF to $15/SF is reasonable place to start. Thickness, coloring, styling and additional labor requirements due to unfavorable site conditions can raise the costs.
In the mid Atlantic, stamped Concrete pricing for a new patio or walkway is $11-18 sq ft.
This would include typical installation in level area: 4" crushed stone base / proper expansion dion joint / integral color / typical stamp patterns and sealer.
If excess site prep is needed (i.e. difficult access/ additional reinforcement/complicated pattern etc.), then you can expect several dollars a sq ft additional cost.
The size of the job also plays a factor as too small or too big typically is a hassle, again calling for additional cost per square ft.
350 sq ft to 2500 sq ft is a typical project size.
What is the locale?
Is the job site up an unpaved road and delivery and finish needs to be completed during a storm?
Just get three (3) estimates and you will be fine.
I charge $10- $25 per square ft. Many factors come into play when writing up a bid.
Design, coloring options, patterns, depth, square or contoured edges, location, ground type, tear out, sealers, expansion joints etc… many customers are not aware of the higher costs of decorative concrete.
Hi, the average price is $8-$14 per sq. ft.
10-20 per ft depending on design and accessibility.
The average price, depending on the size of the project, prep work needed, substrate material, type of stamping and color desires, would be between $7.00 - $20.00 in south eastern lower Michigan.
Hope this helps.
I guess the most important factors are the size and the terrain you work with.
in Caifornia it may vary from $12-$24
If it is just an install, around $15 per sq ft… if it is a removal/install, then it can be around $20, or go slightly above $20 per sq ft. There are all kinds of different options with stamped concrete that can raise or lower the price. 
1 Like
Prices Per SQ will very anywhere from $12-22.
It is really depend on area of installation
it is defer from one place to anther but average is 18 for 1 skin 1 color and 1 pattern then you need to take in to consideration demo and preps angels amount of rebar’s and so on