Share your project details and we'll reach out to
Beman Neil Warren
so you don't have to.
We'll also connect you with other vetted professionals who are a strong match for your project. That way, you can compare quotes, meet different contractors, and make the choice that feels right for you.
Beman Neil Warren at 7145 LAHINCH DRIVE, Gilroy, CA 95020, held a Architect license (#C8500) with the California contractors license board with an expiration date of 11-30-2019. We last verified the license was expired on 08-01-2025.
Their BuildZoom score is 0 because we haven’t been able to verify an active license. As a result, they’re not ranked in the top 50% of 336,931 California contractors.
If you’re thinking about hiring them, we recommend double-checking their license status with your local licensing authority. Alternatively, use our project planner to be easily matched to qualified, licensed professionals in your area.
Scope of work to include: area of work 21, 000 convert classroom conf. rooms and open offices to raised floor rack labs and electrical room. 1.)convert conf. room 126# to future data and conf. room. 118# & 120# to storage. 2.)partial demolish of interior walls & ceilings. 3.)anchorage of raised floor hvac units. 4.)new 24 raised floor at rack labs 5.)new t-bar ceiling 6.)new rooftop e... see more
Scope of work to include: 1.)demo existing bldg(980 sf) and install new building (modular bldg) approx; 1, 920 sq. ft tenant improvement. addition is 940 sf 2.)demoing old fence line and adding new 7 fenceing. 3)also; some site work for irrigation. 4.)extending underground electrical and sanitary to new building
600 sqft commercial tenant improvement of an existing shaker lab expansion. the work include to remove existing chain link fence to building wall and door. modifify the ceiling. relocate the drop shock machine and install a new shaker machine and anchorage. area of work is 600 sq. ft
600 sqft commercial tenant improvement of an existing shaker lab expansion. the work include to remove existing chain link fence to building wall and door. modifify the ceiling. relocate the drop shock machine and install a new shaker machine and anchorage. area of work is 600 sq. ft.
This permit is issued to convert the existing 2nd. floor bench lab to a new rack lab . the work include to create a window two new door s. install a ne w 75o lb. wt. on the 2nd floor conc. slab and an air handler inside the lab
Office tenant improvement to include approx: 1, 500 sq.ft. alteration of this first floor in the building # 18 existing office. 1.)constructing demising wall to divide the office space. install a 9 ft. ht. chain link fence to create a 1300 sq. ft. interior storage area. addition fire rated and non rated doors to the man and woman restrooms. 2.)mech/electrical to code
Office t i on the first floor to install demolish interior walls & doors converting office space into a new demonstration room approx. . 300 sq. ft. with new ceilings and relocating ducting with minor electrical. the new 20-minute fire rated corridor door with a 45 minute side window will replace the old one
Office tenant improvement to include approx: 1, 500 sq.ft. alteration of this first floor in the building # 18 existing office. 1.)constructing demising wall to divide the office space. install a 9 ft. ht. chain link fence to create a 1300 sq. ft. interior storage area. addition fire rated and non rated doors to the man and woman restrooms. 2.)mech/electrical to code
On the first floor building a new dividing wall to divide the existing approx. 3, 254 sq. ft. area into 2 offices each 1, 750 sq. ft. and 1, 504 sq. ft. doing the work to install new ceiling tiles and white noise generators. minor electrical & mechanical relocating some lighting & flex ducting with new registers
Office t i on the first floor to install demolish interior walls & doors converting the existing 1500 sq. ft. storage room to create two new conf. rooms each approx. 460 sq. ft. with new ceilings and the rest of the area is created into three small storage rooms. the conference room doors and the walls are one hr. fire rated to match the existing fire rated corridor
On the first floor building a new dividing wall to divide the existing approx. 3, 254 sq. ft. area into 2 offices each 1, 750 sq. ft. and 1, 504 sq. ft. doing the work to install new ceiling tiles and white noise generators. minor electrical & mechanical relocating some lighting & flex ducting with new registers
This is the int. alter to convert existing 380 sq. ft. conf. room into a tele-conference room. the work include to pony up the existing dividing wall to a full height wall and furr the exterior wall with sound insulation. the area of work is 380 sq. ft
Non-structural interior tenant improvement. - (1, 232 sq ft); addition partition walls to create office spaces and change of use from retail to office. the hours of operation for the proposed office shall be limited between the hours of 7:00 am and 11:00 pm
Office t i on the first floor to install demolish interior walls & doors converting office space into a new demonstration room approx. . 300 sq. ft. with new ceilings and relocating ducting with minor electrical. the new 20-minute fire rated corridor door with a 45 minute side window will replace the old one
This permit is issued to addition an addition new 5, 3oo lb. wt. battery to the three existing batteries. also install a new 8, 000 lb. wt ups in differnt location
2500sqft interior alteration on the 2nd. floor to demolish part as well as to building part of the new chain link fence for the lab. equipments security. also three new card readers are to be installed
Office (ti) 1150 sq. ft. scope:adding ceiling height partition walls by dividing one existing conference room into 2 small tele- conference rooms and doing some minor electrical work in the first floor
This permit is issued to addition an addition new 5, 3oo lb. wt. battery to the three existing batteries. also install a new 8, 000 lb. wt ups in differnt location
This is the int. alter to convert existing 380 sq. ft. conf. room into a tele-conference room. the work include to pony up the existing dividing wall to a full height wall and furr the exterior wall with sound insulation. the area of work is 380 sq. ft
According to the California Architect License Board, the status of this license was at one point cancelled. However, this information may have changed. If this is your business, please update your license status.
Check this license's status for Beman Neil Warren at the California Architect License Board.
This is a sample of licensing data; click here to access a complete history.