×

We'll help you find the right contractor.

Share your project details and we'll reach out to Bob Bunyard Tile so you don't have to.

We'll also connect you with other vetted professionals who are a strong match for your project. That way, you can compare quotes, meet different contractors, and make the choice that feels right for you.

Get Started
B

Location and Projects

Address
78158 Sunrise Canyon Ave, Palm Desert, CA, 92211
Use our bidding system to request a quote

Bob Bunyard Tile

Bob Bunyard Tile at 78158 Sunrise Canyon Ave, Palm Desert, CA 92211, held a Stone and Tile Contractor license (#946470) with the California contractors license board with an expiration date of 06-30-2026. We last verified the license was suspended on 05-23-2026.

Their BuildZoom score is 0 because we haven’t been able to verify an active license. As a result, they’re not ranked in the top 50% of 336,931 California contractors.

If you’re thinking about hiring them, we recommend double-checking their license status with your local licensing authority. Alternatively, use our project planner to be easily matched to qualified, licensed professionals in your area.

Bob Bunyard Tile Contact Information

Phone: (650) 888-7002
Address: 78158 Sunrise Canyon Ave, Palm Desert, CA 92211

Bob Bunyard Tile Reviews
1 out of 5 stars, based on 1 review

  • By Verified Client
    May 24, 2018
    Considered for Tile Installation

    Missed_meeting

Please write a review about Bob Bunyard Tile
1 Rate this contractor
Click stars to rate
2 Provide a detailed review of this contractor.


Building Permits by Bob Bunyard Tile

Sort by: Notable Notable | Date Date | Job Value Job Value
Residential addition-alteration
2016-10-06
Tear and reroof with comparable shingles. 1200 sf
Valuation:
$3,500
Permit #:
B16-4019
Status:
final
Fee:
$228
Permit Type:
N/A
Building Type:
N/A
Residential electrical
2008-01-07
Run new circuit to garage. relocate 4 circuit to main panel and remove old sub-panel. addition 2 plugs-2 lights and gfci's. in kitchen and bathroom
Valuation:
N/A
Permit #:
B08-0012
Status:
final
Fee:
$54
Permit Type:
N/A
Building Type:
N/A
Bl-legacy - legacy permits
2008-09-10
Change old 100amp panel to new 100 amp panel and addition 5 new circuits
Valuation:
$2,610
Permit #:
ZZZZ-08-1021
Status:
complete
Fee:
$105
Permit Type:
N/A
Building Type:
N/A
Bl-legacy - legacy permits
2008-03-20
Changing old 100amp zinsco panel to new 100amp cuttler-hammer panel
Valuation:
$1,800
Permit #:
ZZZZ-08-0572
Status:
complete
Fee:
$98
Permit Type:
N/A
Building Type:
N/A
Residential electrical
2007-08-06
Changing old 100 amp panel to a new 100 amp panel; eliminating subpanel and rerouting those circuits to new panel
Valuation:
N/A
Permit #:
B07-2863
Status:
final
Fee:
$77
Permit Type:
N/A
Building Type:
N/A
Bl-legacy - legacy permits
2010-04-19
Replace old 100 amp panel with new 100 amp panel
Valuation:
$1,800
Permit #:
ZZZZ-10-0654
Status:
complete
Fee:
$101
Permit Type:
N/A
Building Type:
N/A
Non-residential electrical
2008-10-02
Changing old 100 amp to new 100 amp panel for apartment complex's lighting and water heater system
Valuation:
N/A
Permit #:
B08-3189
Status:
final
Fee:
$79
Permit Type:
N/A
Building Type:
N/A
Bl-legacy - legacy permits
2010-04-29
Replace old 100 amp panel with new 100amp panel
Valuation:
$1,600
Permit #:
ZZZZ-10-0904
Status:
complete
Fee:
$100
Permit Type:
N/A
Building Type:
N/A
Residential electrical
2007-08-21
Replacing old 100 amp panel with a new 100 amp panel. installing new sub-panel
Valuation:
N/A
Permit #:
B07-3212
Status:
final
Fee:
$77
Permit Type:
N/A
Building Type:
N/A
Residential electrical
2007-04-27
Service change. changing old 100 amp zinsco panel to a new 100 amp panel
Valuation:
N/A
Permit #:
B07-1540
Status:
final
Fee:
$49
Permit Type:
N/A
Building Type:
N/A
Residential electrical
2007-01-17
Replace old 100 amp service panel witih new 100 amp service panel
Valuation:
N/A
Permit #:
B07-0222
Status:
final
Fee:
$49
Permit Type:
N/A
Building Type:
N/A
Bl-legacy - legacy permits
2007-05-25
Replacing federal pane with new ch panel. replacing sb-panel
Valuation:
$3,630
Permit #:
ZZZZ-07-2125
Status:
complete
Fee:
$125
Permit Type:
N/A
Building Type:
N/A
Residential electrical
2010-08-26
Replacing old panel with new panel
Valuation:
N/A
Permit #:
B10-2545
Status:
final
Fee:
$82
Permit Type:
N/A
Building Type:
N/A
Residential electrical
2008-01-17
Replacing old zinsco 125 amp panel with new 125 amp panel
Valuation:
N/A
Permit #:
B08-0125
Status:
final
Fee:
$77
Permit Type:
N/A
Building Type:
N/A
Residential electrical
2007-08-21
Emergency pg&e disconnect at same time installed new panel
Valuation:
N/A
Permit #:
B07-3214
Status:
final
Fee:
$77
Permit Type:
N/A
Building Type:
N/A
Residential electrical
2007-03-05
Replacing old zinsco 100 amp panel with new 125 amp panel
Valuation:
N/A
Permit #:
B07-0719
Status:
final
Fee:
$49
Permit Type:
N/A
Building Type:
N/A
Residential electrical
2008-07-21
Replacing old 100 amp panel with new 100 amp panel
Valuation:
N/A
Permit #:
B08-2252
Status:
final
Fee:
$79
Permit Type:
N/A
Building Type:
N/A
Residential electrical
2009-06-29
Changing old 100 amp panel to new 100 amp panel
Valuation:
N/A
Permit #:
B09-1513
Status:
final
Fee:
$79
Permit Type:
N/A
Building Type:
N/A
Residential electrical
2010-04-01
Replacing old 125 amp panel with new 125 amp panel
Valuation:
N/A
Permit #:
B10-0803
Status:
final
Fee:
$80
Permit Type:
N/A
Building Type:
N/A
Residential electrical
2010-06-01
Replacing old 100 amp panel with new 100 amp panel
Valuation:
N/A
Permit #:
B10-1435
Status:
final
Fee:
$80
Permit Type:
N/A
Building Type:
N/A