Share your project details and we'll reach out to
Epica Inc
so you don't have to.
We'll also connect you with other vetted professionals who are a strong match for your project. That way, you can compare quotes, meet different contractors, and make the choice that feels right for you.
Epica Inc at 207 W LOS ANGELES AVE STE 332, Moorpark, CA 93021, held a General Contractor license (#969993) with the California contractors license board with an expiration date of 02-28-2018. We last verified the license was expired on 04-09-2026.
Their BuildZoom score is 0 because we haven’t been able to verify an active license. As a result, they’re not ranked in the top 50% of 336,931 California contractors.
If you’re thinking about hiring them, we recommend double-checking their license status with your local licensing authority. Alternatively, use our project planner to be easily matched to qualified, licensed professionals in your area.
01/14/2016 changes to an approved set of plans. changes have been made to the single line diagram to reflect field installation (msp is a 400-amp split bus panel). photovoltaic system has remained the same. *****previous work description***** plan check for a pv1 roof-mounted photovoltaic system. system size is 11 kwac and consists of (44) modules (44) micro-inverters and (1) load center
Pv1 central/string inverter simplified standard plan. install roof-mounted solar array on single family dwelling interconnect with msp. system size: 7.6kw. (2) solaredge se3800a-us transformerless inverters (34) solaredge p300 power optimizers (34) lg mono x 275s1c-b3 photovoltaic modules
[[[4/1/15 changes to approved set. minor changes to single line diagram page; removie notes for 6x6 jox reductiong #8 to #10 conductor and removing 22k aic note]]]] plan check for photovoltaic system roof mounted system with 36 enphase microinverter 250. total system size: 9kw
Install roof mounted photovoltaic solar system with enphase microinverters. 2.75kw system. the solar photovoltaic installation shall comply with los angeles fire department's fire prevention bureau (fpb) requirement no. 96
Pv1 using microinverter standard plan. install roof-mounted solar array on single family dwelling. interconnect with 200a msp. system size: 7.2kw. 30 enphase m250 microinverters and 30 275w photovoltaic modules across two strings (15+15)
(((supplemental application. changes to approved set of plans. change include 2 conduits to load center. and wire size change. clouded.))) plan check only pv1 for 2 story single family dwelling. total system size: 13.520 kw. negatively grounded. [solar module: lg260s1c-g3] [inverter: (2) sunnyboy sb6000us]
Expedite per applicant request install a roof-mounted solar array on a single family dwelling. interconnect with a 200a msp. system size: 2.88kw. ungrounded system. (12) enphase m250 microinverters. (12) 280w photovoltaic modules
Changes to approved set of plans. no changes to modules on roof all changes are on the side of the building involving dwp air conditioning disconnect and distribution panel(s). please coordinate plan check with that of building a (12041-20001-12780). please include 400a service upgrade for inspection fee period. enphase photovoltaic system on the roof of apartment buildings. building b
Changes to approved set of plans. addition of 125a subpanel and re-routing of conductors. please coordinate plan check with that of building b (12041-20001-12772). enphase photovoltaic system on the roof of apartment buildings. building a
Expedite per customer request. pv1 install roof mounted photovoltaic system sized 15.8kw interconnected with msp line side tap. (65) lg280s1c-b3 modules (3) solar edge inverters (65) power optimizers
New rooftop photovoltaic system for an existing single family residence. system is ungrounded and uses power optimizers. (changes to approved set of plans. change only main service and interconnection. no change in photovoltaic side of system. ))))
Installation of new roof mounted solar photovoltaic array. total system size = 12.5 kwac. microinverter system with 50 enphase m250 arranged in 4 branch circuits
Changes to approved set of plans. new roof layout relocation of equipment and service upgrade. zoning has been approved on original permit. new 9.8kw rooftop mounted photovoltaic system for an existing single family residence
Connection ahead of main to be approved by dwp. new rooftop photovoltaic system for an existing single family residence. system is ungrounded and uses power optimizers. plan check only. (this is a change from a previously approved plan)
Expedited per applicant request. plan check for a pv2 roof-mounted photovoltaic system. system size is 13.5 kwac and consists of (54) modules (54) micro-inverters and (1) load center
Expedite fees only. installation of new roof mounted solar photovoltaic array. total system size = 12.5 kwac. microinverter system with 50 enphase m250 arranged in 4 branch circuits
Supp. application for change in location of solar array. no change in electrical properties. pc only for changes. permit already issued under original application. photovoltaic system on roof of single family dwellling with modules inverters and photovoltaic subpanel
Pv1. install 17.7 kw dc roof-mounted utility-interactive photovoltaic system. transformerless inverter with dc-dc converters. new system has been specified. this ppalication is now void
Pv1 single family dwelling. using transformerless system using power optimizers. total system size 8.84kw. using total of 34 modules. system to be checked for main service upgrade and panel upgrade
According to the California Contractors State License Board, the status of this license was at one point cancelled. However, this information may have changed. If this is your business, please update your license status.
Check this license's status for Epica Inc at the California Contractors State License Board.
This is a sample of licensing data; click here to access a complete history.