×

We'll help you find the right contractor.

Share your project details and we'll reach out to Heritage Air and Heat LLC so you don't have to.

We'll also connect you with other vetted professionals who are a strong match for your project. That way, you can compare quotes, meet different contractors, and make the choice that feels right for you.

H

Location and Projects

Address
207 Stanford Ct, Heath, TX, 75032
Use our bidding system to request a quote

Heritage Air and Heat HVAC/Mechanical Contractor

WE ARE AN A/C AND HEATING COMPANY FOR RESIDENTIAL PROPERTIES. WE HAVE OVER 25 YEARS EXPERIENCE IN THIS INDUSTRY.

From BuildZoom: Heritage Air and Heat LLC, 207 Stanford Ct, Heath, TX (Owned by: Steve Buis) holds a Mechanical Contractor Registration license and 22 other licenses according to the Texas license board.

Their BuildZoom score of 82 does not rank in the top 50% of Texas contractors.

Their license was verified as active when we last checked. If you are thinking of hiring Heritage Air and Heat LLC, we recommend double-checking their license status with the license board and using our bidding system to get competitive quotes.

Heritage Air and Heat LLC Services

Start a project today:

Heritage Air and Heat LLC Contact Information

Phone: (972) 722-9099
Address: 207 Stanford Ct, Heath, TX 75032

Heritage Air and Heat LLC Heath

Quality

82
19th percentile
Pro tip: We generally recommend hiring a contractor with a score higher than 95.
Heritage Air and Heat LLC has a BuildZoom score of 82, which places them above 19% of 222,249 contractors in Texas.

Activity

140 projects
2025
160 projects
2024
137 projects
2023
Our building permit records indicate that Heritage Air and Heat LLC has worked on at least 437.0 projects over the past 3 years.

This is an overview of this contractor's activity. Click here to access our complete licensing and building permit database.

Experience

428 projects
HVAC projects
253 projects
Mechanical projects
Analyzing permits over the last 4 years shows that Heritage Air and Heat LLC mostly works on hvac project and mechanical project projects.

Pricing

107 projects
< $5k
30 projects
$5k-$20k
1 project
$20k-$50k
Value Not Public: 305.0 projects
The typical size of their permits is approximately $2,460. This graph shows the distribution of these job values.
Pro tip: For more details about their pricing, check out their recent activity to see how much they have charged for different types of work.

Heritage Air and Heat LLC Reviews
1 out of 5 stars, based on 3 reviews

  • By Lane P.
    May 23, 2023

    Beware of inappropriate costs and poor customer service! Company will try to charge you to replace items that are not defective stating code enforcement requires it. All I needed was a coil replacement (through home warranty) and they want to charge to replace drain line, float switch, drain pan, and more. I spoke to the city code enforcement department and they said it is not required when replacing the coil. I called the company asking if we could get on a conference call with my contact at the city and they said they would get back to me. They never did 1.5 weeks later so I had to call back. When I spoke to Katelyn (however you spell it) at Heritage, she provided a "new" story that they make customers replace those items to be proactive just in case they become defective and that is how they operate. She then proceeded to tell me if I didn't want to accept their business practices then I could find someone else. I suggest you closely examine the estimate they provide you as they are just trying to increase their margins and as a result are not focused on the customer experience.

  • By Tony T.
    April 5, 2021
    AC Heat Pump Replace Reverse Valve
    $700

    My HVAC with heat pump was set to A/C at 70 and 97 heat was coming out of the vents. I contacted American Home Shield (AHS) and they quickly assigned Heritage Air and Heat (4414 State Hwy. 276, Rockwall, TX).

    The technician (Teo) came out and diagnosed the reverse valve had to be replaced and the warranty covered it. However, the R22 (10 lbs) would be only covered at $10 an lb. The charge is $80 an lb and their company assured me that AHS is aware of the upcharge (turns out they hadn't even reached out to AHS to submit the diagnosis, work order, or get authorization for the additional homeowner charges). Since we are draining all of the freon I asked if R407C could be used instead of R22 since it was $40 an lb and the warranty would cover $10. R22 could cost $700 and R407C would cost $300. They told me that my compressor was not compatible with R407C, therefore we would have to use R22. Then they closed out my ticket marking it complete instead of pending a follow-up.

    The reverse valve came in and a different team of technicians (Taylor) came out. I watch them remove the reverse valve, install a new one, pulled out a brand new R407C, and installed the freon. The technician had forgotten his temperature infrared thermometer and said that he would use the feel of his hand to ensure the difference between the supply and return air was sufficient.

    Luckily I have video cameras on that side of the home, and the only freon container that was plugged into the system was R407C. I contacted Heritage to ask why R407C was used if it's not compatible with my compressor, and why I was charged R22 for R407C. They denied using R407C, and that R22 was installed even after I had shown them the pictures and video clips of R407C being installed. I asked to escalate to a supervisor so that the issue may be resolved and have been ignored since.

    The integrity of this business and technicians are questionable. Either the compressor was compatible and Heritage was unethical and wanted to do an upcharge. Or the system was truly not compatible which will cause the gas in the R407C to not link up with the mineral oil in the compressor, which will cause a sludge lubricant inside the circuit. Eventually, the compressor will fail catastrophically and the entire unit will need to be replaced.

    I have contacted AHS and they are still waiting on the diagnosis and request for authorization.

    Read more
  • By Hanksnow
    June 7, 2018
    air
    $2,500

    They came to my home 4 times before they could properly resolve the issue. Secondly, when they did replace the defective part, that was under warranty their technician charged me additional S40.00 for another part that was covered under warranty. When I called to validate the charge what I got was more subterfuge. Very Dishonest, making it a point to do business when them again

Please write a review about Heritage Air and Heat LLC
1 Rate this contractor
Click stars to rate
2 Provide a detailed review of this contractor.


Building Permits by Heritage Air and Heat LLC

Sort by: Notable Notable | Date Date | Job Value Job Value
Hvac/mechanical - commercial
2023-01-04
Adding 2 hvac/roof top units to vacant space. space will remain vacant. tenant finish-out will be by others
Valuation:
$40,000
Permit #:
006807-2022-CMISC
Status:
complete
Fee:
$593
Permit Type:
N/A
Building Type:
N/A
Residential stand-alone mechanical
2025-06-24
Replace 5 ton condenser coil and furnace
Valuation:
$8,000
Permit #:
RES2025-06-03221
Status:
issued
Fee:
$49
Permit Type:
N/A
Building Type:
N/A
Residential stand-alone mechanical
2025-07-21
Replace 3.5 ton heat pump and air handler
Valuation:
$11,417
Permit #:
RES2025-06-02926
Status:
complete
Fee:
$49
Permit Type:
N/A
Building Type:
N/A
Residential stand-alone mechanical
2025-06-03
Replace 3 ton heat pump and air handler
Valuation:
$5,400
Permit #:
RES2025-05-02656
Status:
complete
Fee:
$49
Permit Type:
N/A
Building Type:
N/A
Residential stand-alone mechanical
2025-05-28
Replace 3.5 ton condenser and air handler
Valuation:
$5,400
Permit #:
RES2025-05-02647
Status:
issued
Fee:
$49
Permit Type:
N/A
Building Type:
N/A
Residential hvac changeout online
2025-07-08
Replace 5 ton condenser coil and furnace
Valuation:
N/A
Permit #:
BLD25-08474
Status:
final
Fee:
$65
Permit Type:
N/A
Building Type:
N/A
Residential hvac changeout online
2025-06-13
Replace 5 ton condenser coil and furnace
Valuation:
N/A
Permit #:
BLD25-07793
Status:
final
Fee:
$65
Permit Type:
N/A
Building Type:
N/A
Residential hvac changeout online
2025-06-04
Replace 5 ton condenser coil and furnace
Valuation:
N/A
Permit #:
BLD25-06900
Status:
final
Fee:
$65
Permit Type:
N/A
Building Type:
N/A
Residential hvac changeout online
2025-05-21
Replace 5 ton condenser coil and furnace
Valuation:
N/A
Permit #:
BLD25-06898
Status:
issued
Fee:
$65
Permit Type:
N/A
Building Type:
N/A
Hvac/mechanical - residential
2025-05-21
Replace 3 ton condenser coil and furnace
Valuation:
N/A
Permit #:
003296-2025-RMISCO
Status:
final
Fee:
$175
Permit Type:
N/A
Building Type:
N/A
Residential hvac changeout online
2025-04-24
Replace 2.5 ton condenser coil and furnace
Valuation:
N/A
Permit #:
BLD25-05518
Status:
issued
Fee:
$65
Permit Type:
N/A
Building Type:
N/A
Residential hvac changeout online
2025-04-22
Replace 4 ton condenser coil and furnace
Valuation:
N/A
Permit #:
BLD25-05389
Status:
issued
Fee:
$65
Permit Type:
N/A
Building Type:
N/A
Residential hvac changeout online
2025-05-16
Install 4 ton condenser coil and furnace
Valuation:
N/A
Permit #:
BLD25-05386
Status:
final
Fee:
$65
Permit Type:
N/A
Building Type:
N/A
Hvac/mechanical - residential
2025-11-03
Replace 2.5 ton condenser and coil
Valuation:
N/A
Permit #:
002929-2025-RMISCO
Status:
issued
Fee:
N/A
Permit Type:
N/A
Building Type:
N/A
Residential hvac changeout online
2025-05-16
Replace 5 ton condenser and coil only
Valuation:
N/A
Permit #:
BLD25-06218
Status:
final
Fee:
$65
Permit Type:
N/A
Building Type:
N/A
Residential hvac changeout online
2025-07-01
Replace 3.5 ton air handler
Valuation:
N/A
Permit #:
BLD25-08936
Status:
issued
Fee:
$65
Permit Type:
N/A
Building Type:
N/A
Residential stand-alone mechanical
2025-12-21
Replace 3 ton coil only
Valuation:
$2,270
Permit #:
RES2025-06-03225
Status:
expired
Fee:
$49
Permit Type:
N/A
Building Type:
N/A
Residential stand-alone mechanical
2025-06-24
Replace 4 ton coil only
Valuation:
$3,190
Permit #:
RES2025-06-03224
Status:
issued
Fee:
$49
Permit Type:
N/A
Building Type:
N/A
Residential stand-alone mechanical
2025-07-29
Replace 2 ton coil only
Valuation:
$2,195
Permit #:
RES2025-06-03223
Status:
complete
Fee:
$49
Permit Type:
N/A
Building Type:
N/A
Hvac/mechanical - residential
2025-06-17
Replace 4 ton coil only
Valuation:
N/A
Permit #:
004014-2025-RMISCO
Status:
final
Fee:
$175
Permit Type:
N/A
Building Type:
N/A