Share your project details and we'll reach out to
Prestige Roofing
so you don't have to.
We'll also connect you with other vetted professionals who are a strong match for your project. That way, you can compare quotes, meet different contractors, and make the choice that feels right for you.
Prestige Roofing, 2271 N Batavia St, Orange, CA (Employees: Guadalupe J Vasquez, John Carlos Arellano, and Lorenzo Massoom Cipriani) holds a Electrical license and 2 other licenses according to the California license board.
Their BuildZoom score of 111 ranks in the top 4% of 336,931 California licensed contractors.
Their license was verified as active when we last checked. If you are thinking of hiring Prestige Roofing, we recommend double-checking their license status with the license board and using our bidding system to get competitive quotes.
Wrfr-01: re-roof | additional details: tear-off existing 1-layer tile roof. re-roof main house with attached garage (excludes flat roof): approximately 3 603 sq. ft. replace sheathing as needed. install a single layer of westlake s/a synthetic underlayment. install eagle capistrano tile in the 3698 kona red range color
26 squares of cool roof shingles (timberline hdz) - gray tear off existing roof to sheathing use existing sheathing (replace as needed) apply one layer of synthetic underlayment slope 5:12 crrc# 0676-0136b sri: 21 note: work includes attached garage *** crc section r905.2 *** for roof slopes of 2 units vertical in 12 units horizontal (2:12) up to 4 units vertical in 12 units horizonta... see more
Tear off (e) tile (n) sheathing as needed (n) 1 layer of synthetic underlayment & (n) gaf timberline comparable shingles (33 sqs) - slope 5:12 ***manufacturer’s installation spec sheets to be onsite *** ***cool roof compliance is required in climate zone 6 for roof slopes less than 2:12***
24 squares of cool roof shingles (timberline hdz) - gray tear off existing roof to sheathing use existing sheathing (replace as needed) apply one layer of synthetic underlayment slope 4:12 crrc# 0676-0136a sri: 16 note: work includes detached garage *** crc section r905.2 *** for roof slopes of 2 units vertical in 12 units horizontal (2:12) up to 4 units vertical in 12 units horizonta... see more
Re-roof with class a or b material weighing less than 6 pounds per sq. ft. over existing solid sheathing 24 squares. class a roof covering is required within very high fire hazard severity zone (vhfhsz). for residential roof replacement > 50% of the total roof area apply cool roof product labeled and certified by cool roof rating council (crrc). cool roof may be required for non-resid... see more
Lift and relay existing tile throughout home: approximately 2 657 sq. ft. replace sheathing as needed. install a double layer of 30lb felt underlayment. install existing tiles back per manufacturers specifications
Wrfr-01: re-roof | additional details: lift and relay existing tile on the main house with attached garage: approximately 3 533 sq. ft. replace sheathing as needed. installing a single layer of westlake tile seal s/a synthetic underlayment. reinstall existing tiles back per manufacturer's specifications
22 squares of cool roof shingles (timberline hdz) - tan tear off existing roof to sheathing use existing sheathing (replace as needed) apply one layer of synthetic underlayment slope 4:12 crrc# 0676-0133a sri: 18
Wrfr-01: re-roof | additional details: lift and relay existing tile on the main house with attached garage: approximately 1 742 sq. ft. replace sheathing as needed. install a double layer of 30lb fontana felt underlayment. install existing tiles back per manufacturer's specifications
Wrfr-01: re-roof | additional details: like for like reset and relay remove and stack existing tile remove existing underlayment replace wood as needed install new fire resistant underlayment install existing tile
Wrfr-01: re-roof | additional details: tear-off existing 1-layer (cal shake) roof. re-roof main house with attached garage (includes flat roofs): approximately 2, 770 sq. ft. install 1/2 radiant barrier osb plywood on slope roof only. install a double layer of 40lb fontana felt underlayment. install eagle light weight tile on sloped roof (1, 983 sq. ft.). install torch down on flat ro... see more
Wrfr-01: re-roof | additional details: tear-off existing 1-layer (fiber cement tile) roof. install %bd%94 radiant barrier osb plywood on sloped roof (3, 169 sq. ft.) re-roof main house with attached garage (includes flat roof): approximately 3, 319 sq. ft. install a double layer of 40lb fontana felt underlayment. install eagle bel air light weight tile in the 295 dark charcoal range (... see more
Tear off the existing 1-layer (slate) roof. replace sheathing as needed. re-roof main house with attached garage (includes flat roof): approximately 1, 655 sq. ft. install a double layer of 40lb fontana felt underlayment. install new davinci inspire classic synthetic slate tile in charcoal black
Wrfr-01: re-roof | additional details: tear-off existing 2-layer (comp shingle) roof. re-roof main house with attached garage (includes the flat roof): approximately 2, 966 sq. ft. replace sheathing as needed. install a single layer of synthetic underlayment. install gaf hdz roofing shingles on sloped roof. install certainteed torch down on flat roof