Share your project details and we'll reach out to
Custom Finishers Inc
so you don't have to.
We'll also connect you with other vetted professionals who are a strong match for your project. That way, you can compare quotes, meet different contractors, and make the choice that feels right for you.
Custom Finishers Inc at Philadelphia, PA 19019, held a license (#20006) with the Philadelphia contractors license board with an expiration date of 03-30-2025. We last verified the license was expired on 06-05-2026.
Their BuildZoom score is 0 because we haven’t been able to verify an active license. As a result, they’re not ranked in the top 50% of 125,106 Pennsylvania contractors.
If you’re thinking about hiring them, we recommend double-checking their license status with your local licensing authority. Alternatively, use our project planner to be easily matched to qualified, licensed professionals in your area.
For the installation of six (6) statically illuminated wall signs. all work to be done per approved plans. if field conditions vary contact design engineer prior to the start of any work. separate electrical permit required
For the installation of directional signs flatwall signs and free standing signs for a hospital as per approved plans. **separate building permit and streets department approval required for all vd-1 and vd-2 signs**
For erection of two (2) building identification (flatwall signs) one sign on the side of the building at roof level and one sign at the east bridge entrance canopy. sizes and location as per attached plans. all anchorages to be threaded bolts with lock washers with positive anchorage to metal stud storefront per plans - all hardware shall be sized to support weight of installed letter... see more
For the installationof one (1) internally illuminated flat wall signs and one (1) non-illuminated flat walls sign. size and location as shown on plans. sign accessory to a maintenance and repair of consumer goods in an existing structure. separeate permit required for electric
For the installation of one (1) static internally illuminated wall sign as per plans and in accordance with 2018 ibc. separate permit required for electrical work. see zp-2021-013347 for zoning approval. sign permit only
For the installation of one non-illuminated flat cut letters and three internally illuminated channel letter signs as per approved plan. signs accessory to a fresh food market. separate permit required for electric
The erection of two (2) internally illuminated flat wall signs. size and location as shown in the application/plans. signs accessory to a retail sales of consumer goods. separate permit required for electric
For the erection of seven (7) static internally illuminated wall sign and two (2) double faced freestanding vinyl signs. sizes and locations as shown on plans
For the removal of existing signage; for the erection of two (2) statically illuminated wall signs (1 southerly facing 1 easterly facing) and for the re-facing panels on an existing double-faced statically illuminated freestanding sign. sizes and locations as shown in the application/plans. no change in height of existing structure
For the installation of two (2) flat wall signs with static illumination and refacing of an existing accessory double sided illuminated roof sign (size and location as shown on plans)
For the erection of seven(7) single-faced statically illuminated flatwall signs and the refacing of one(1) freestanding sign. sizes and locations as shown in plan
For the erection of two (2) accessory flat wall sign static internally illuminated on an existing structure (size and location as shown on the plan)sign accessory to a previously approved retail sales of cell phones (retail sales of consumer goods
Install (1) set of halo lit led letters on interior storefront 17.75 high by 54 wide= 6.65 ft2. install (1) set of halo lit led letters on interior storefront 46.5685 high by 112.6453 wide = 36.5 ft2. (details as shown on the plan)
For the erection of one (1)internally illuminated flat wall sign. size and location as shown in the application plans.**separate permit required for any electrical work**
Install (1) led illuminated alum cabinet sign on storefront elevation above entrance. 11 high by 134.5 wide = 10.27ft2. accessory to retail sale of consumer goods (retail floral) on the first floor of an attached structure
For the installation of two (2) single faced statically illuminated wall signs and for the resurface of two (2) existing pylon signs. size and location as shown in application plans. signs accessory to the retail cellular telephone sales and service
Install an atm combo surround with signage over existing vestibule entrance 9'-0 high by 9'-2 wide = 82.5 ft2 overall size. signage dimensions 10"4x8'-6"w=70. existing signage danlu (2) sets of channel letters 129"x36"ea 330ea. one set on market street elevation
According to the City of Philadelphia Licensed Contractors, the status of this license was at one point cancelled. However, this information may have changed. If this is your business, please update your license status.
Check this license's status for Custom Finishers Inc at the City of Philadelphia Licensed Contractors.
This is a sample of licensing data; click here to access a complete history.